Cold Starting and Oil Pumpability —An Evaluation of New and Used Oils in Gasoline Engines

Author(s):  
WH Stover
Author(s):  
Sanket Gujarathi ◽  
Tamer Badawy ◽  
Naeim Henein

Cold starting of diesel engines is characterized by inherent problems such as long cranking periods and combustion instability leading to an increase in fuel consumption and the emission of high concentrations of hydrocarbons which appear as white smoke. The ion current signal has been considered for the feedback control of both gasoline and diesel engines. However, the ion current signal produced from the combustion of the heterogeneous charge in diesel engines is weaker compared to that produced from the combustion of the homogeneous charge in gasoline engines. This presents a problem in the detection of the ion current signal in diesel engines, particularly during starting and idling operations. This paper investigates and addresses the ion current detection problems pertaining to cold starting and various idling speeds. Also, different approaches have been investigated to improve the signal detection under these conditions.


1903 ◽  
Vol 56 (1458supp) ◽  
pp. 23369-23369
Author(s):  
Dugald Clerk
Keyword(s):  

Author(s):  
A.A. Moykin ◽  
◽  
A.S. Medzhibovsky ◽  
S.A. Kriushin ◽  
M.V. Seleznev ◽  
...  

Nowadays, the creation of remotely-piloted aerial vehicles for various purposes is regarded as one of the most relevant and promising trends of aircraft development. FAU "25 State Research Institute of Chemmotology of the Ministry of Defense of the Russian Federation" have studied the operation features of aircraft piston engines and developed technical requirements for motor oil for piston four-stroke UAV engines, as well as a new engine oil M-5z/20 AERO in cooperation with NPP KVALITET, LLC. Based on the complex of qualification tests, the stated operational properties of the experimental-industrial batch of M-5z/20 AERO oil are generally confirmed.


Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 779
Author(s):  
Ashraf Elfasakhany

Biofuels are receiving increased scientific attention, and recently different biofuels have been proposed for spark ignition engines. This paper presents the state of art of using biofuels in spark ignition engines (SIE). Different biofuels, mainly ethanol, methanol, i-butanol-n-butanol, and acetone, are blended together in single dual issues and evaluated as renewables for SIE. The biofuels were compared with each other as well as with the fossil fuel in SIE. Future biofuels for SIE are highlighted. A proposed method to reduce automobile emissions and reformulate the emissions into new fuels is presented and discussed. The benefits and weaknesses of using biofuels in SIE are summarized. The study established that ethanol has several benefits as a biofuel for SIE; it enhanced engine performance and decreased pollutant emissions significantly; however, ethanol showed some drawbacks, which cause problems in cold starting conditions and, additionally, the engine may suffer from a vapor lock situation. Methanol also showed improvements in engine emissions/performance similarly to ethanol, but it is poisonous biofuel and it has some sort of incompatibility with engine materials/systems; its being miscible with water is another disadvantage. The lowest engine performance was displayed by n-butanol and i-butanol biofuels, and they also showed the greatest amount of unburned hydrocarbons (UHC) and CO emissions, but the lowest greenhouse effect. Ethanol and methanol introduced the highest engine performance, but they also showed the greatest CO2 emissions. Acetone introduced a moderate engine performance and the best/lowest CO and UHC emissions. Single biofuel blends are also compared with dual ones, and the results showed the benefits of the dual ones. The study concluded that the next generation of biofuels is expected to be dual blended biofuels. Different dual biofuel blends are also compared with each other, and the results showed that the ethanol–methanol (EM) biofuel is superior in comparison with n-butanol–i-butanol (niB) and i-butanol–ethanol (iBE).


2021 ◽  
Author(s):  
Ningchen Fu ◽  
Zicheng Lai ◽  
Yuping Zhang ◽  
Yan Ma

The octane number is one of the important indicators in crude oil processing, and it is related to the anti-knock performance of gasoline engines. The loss of octane number in...


1994 ◽  
Author(s):  
V. K. Rao ◽  
D. P. Gardiner ◽  
M. F. Bardon
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document