Fracture Resistance of a Pressure Vessel Steel Under Impact Loading Conditions

2009 ◽  
pp. 92-92-12
Author(s):  
W Böhme
Author(s):  
Guillaume Chas ◽  
Eric Molinie´ ◽  
Eric Garbay ◽  
Francois Cle´mendot ◽  
Dominique Moinereau ◽  
...  

The warm pre-stress (WPS) of a flawed structure occurs when it is pre-loaded at high temperature in the ductile domain then cooled and loaded up to fracture in the brittle to ductile transition temperature domain. This load history is a feature of RPV accidental transients of LOCA type. Numerous tests on non irradiated specimens and structures have shown the favourable effect of WPS on fracture behaviour. Theorical knowledge let expect that the WPS effect occurs by the same way on irradiated material, but experimental approach had to be completed in such conditions. The experimental program presented in the present article consists in fracture toughness tests under WPS loading conditions performed on two RPV steels irradiated up to a fluence of 6,5.1019 n/cm2. The CT12.5 specimens used for these tests had been irradiated in the capsules of the pressure vessel surveillance program of two french reactors. Different types of WPS load history have been applied to cover typical accidental transients. All the results obtained confirmed for an irradiated steel the two assumptions generally made about the WPS effect: no fracture occurred during the cooling step of the loading even at high load level and the mean fracture toughness value is higher than that measured with conventional mono-temperature tests.


2005 ◽  
Vol 96 (8) ◽  
pp. 909-912
Author(s):  
Karel Obrtlík ◽  
Christian Robertson ◽  
Bernard Marini

2021 ◽  
Vol 11 (7) ◽  
pp. 2917
Author(s):  
Madalina Rabung ◽  
Melanie Kopp ◽  
Antal Gasparics ◽  
Gábor Vértesy ◽  
Ildikó Szenthe ◽  
...  

The embrittlement of two types of nuclear pressure vessel steel, 15Kh2NMFA and A508 Cl.2, was studied using two different methods of magnetic nondestructive testing: micromagnetic multiparameter microstructure and stress analysis (3MA-X8) and magnetic adaptive testing (MAT). The microstructure and mechanical properties of reactor pressure vessel (RPV) materials are modified due to neutron irradiation; this material degradation can be characterized using magnetic methods. For the first time, the progressive change in material properties due to neutron irradiation was investigated on the same specimens, before and after neutron irradiation. A correlation was found between magnetic characteristics and neutron-irradiation-induced damage, regardless of the type of material or the applied measurement technique. The results of the individual micromagnetic measurements proved their suitability for characterizing the degradation of RPV steel caused by simulated operating conditions. A calibration/training procedure was applied on the merged outcome of both testing methods, producing excellent results in predicting transition temperature, yield strength, and mechanical hardness for both materials.


Sign in / Sign up

Export Citation Format

Share Document