Comparison and Evaluation of Different Test Methods and Models for Determining Zero Shear Viscosity of Asphalt Binder

2021 ◽  
Vol 50 (2) ◽  
pp. 20210260
Author(s):  
Honglei Wang ◽  
Jianfeng Liu ◽  
Hua Qin ◽  
Xue Wang ◽  
Zhuohui Tao ◽  
...  
Keyword(s):  
Shear Viscosity ◽  
Asphalt Binder ◽  
Test Methods ◽  
Zero Shear Viscosity

scholarly journals Impact of Graphene Oxide on Zero Shear Viscosity, Fatigue Life and Low-Temperature Properties of Asphalt Binder

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3073
Author(s):  
Abbas Mukhtar Adnan ◽  
Chaofeng Lü ◽  
Xue Luo ◽  
Jinchang Wang
Keyword(s):  
Graphene Oxide ◽  
Fatigue Life ◽  
Low Temperature ◽  
Shear Viscosity ◽  
Storage Stability ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Test Results ◽  
Zero Shear Viscosity ◽  
Modified Asphalt

This study has investigated the impact of graphene oxide (GO) in enhancing the performance properties of an asphalt binder. The control asphalt binder (60/70 PEN) was blended with GO in contents of 0%, 0.5%, 1%, 1.5%, 2%, and 2.5%. The permanent deformation behavior of the modified asphalt binders was evaluated based on the zero shear viscosity (ZSV) parameter through a steady shear test approach. Superpave fatigue test and the linear amplitude sweep (LAS) method were used to evaluate the fatigue behavior of the binders. A bending beam rheometer (BBR) test was conducted to evaluate the low-temperature cracking behavior. Furthermore, the storage stability of the binders was investigated using a separation test. The results of the ZSV test showed that GO considerably enhanced the steady shear viscosity and ZSV value, showing a significant contribution of the GO to the deformation resistance; moreover, GO modification changed the asphalt binder’s behavior from Newtonian to shear-thinning flow. A notable improvement in fatigue life was observed with the addition of GO to the binder based on the LAS test results and Superpave fatigue parameter. The BBR test results revealed that compared to the control asphalt, the GO-modified binders showed lower creep stiffness (S) and higher creep rate (m-value), indicating increased cracking resistance at low temperatures. Finally, the GO-modified asphalt binders exhibited good storage stability under high temperatures.

Prediction of Zero-Shear Viscosity of Linear Polybutadienes from the Crossover Point Using Doi-Edwards Theory

1988 ◽  
Vol 61 (5) ◽  
pp. 812-827 ◽  
Author(s):  
Ramesh R. Rahalkar ◽  
Henry Tang
Keyword(s):  
Shear Viscosity ◽  
Amorphous Polymers ◽  
Simple Expression ◽  
Crossover Frequency ◽  
Crossover Point ◽  
Zero Shear Viscosity ◽  
Plateau Modulus ◽  
Good Agreement

Abstract Based upon the Doi-Edwards theory, a simple expression has been obtained for zero-shear viscosity in terms of the plateau modulus and the crossover frequency. There are no adjustable parameters in the expression. The model is in very good agreement with the zero-shear viscosity values for linear polybutadienes, the typical discrepancy being ∼5–10%. If the model can be validated for other linear amorphous polymers, it may become possible to estimate the zero-shear viscosity by measuring a single Theological parameter (the crossover frequency).

scholarly journals Recent advances in characterizing the “bee” structures and asphaltene particles in asphalt binders

2020 ◽  
Vol 13 (6) ◽  
pp. 697-706
Author(s):  
Yuhong Wang ◽  
Kecheng Zhao ◽  
Fangjin Li ◽  
Qi Gao ◽  
King Wai Chiu Lai
Keyword(s):  
Near Field ◽  
Asphalt Binder ◽  
Optical Microscope ◽  
Asphalt Binders ◽  
Zero Shear Viscosity ◽  
Surface Features ◽  
Asphaltene Content ◽  
Scanning Transmission ◽  
Before And After ◽  
Binder Aging

AbstractThe microscopic surface features of asphalt binders are extensively reported in existing literature, but relatively fewer studies are performed on the morphology of asphaltene microstructures and cross-examination between the surface features and asphaltenes. This paper reports the findings of investigating six types of asphalt binders at the nanoscale, assisted with atomic force microscopy (AFM) and scanning transmission electron microscopy (STEM). The surface features of the asphalt binders were examined by using AFM before and after being repetitively peeled by a tape. Variations in infrared (IR) absorbance at the wavenumber around 1700 cm−1, which corresponds to ketones, were examined by using an infrared s-SNOM instrument (scattering-type scanning near-field optical microscope). Thin films of asphalt binders were examined by using STEM, and separate asphaltene particles were cross-examined by using both STEM and AFM. In addition, connections between the microstructures and binder’s physicochemical properties were evaluated. The use of both microscopy techniques provide comprehensive and complementary information on the microscopic nature of asphalt binders. It was found that the dynamic viscosities of asphalt binders are predominantly determined by the zero shear viscosity of the corresponding maltenes and asphaltene content. Limited samples also suggest that the unique bee structures are likely related to the growth of asphaltene content during asphalt binder aging process, but more asphalt binders from different crude sources are needed to verify this finding.

Sign in / Sign up

Export Citation Format

Share Document