An Investigation into the Continuous High-Temperature Grade and Elastic Recovery of Asphalt Binders Measured Using the Creep-Recovery Test

2016 ◽  
Vol 45 (5) ◽  
pp. 20160115 ◽  
Author(s):  
Z. Arega ◽  
N. Sakib ◽  
A. Bhasin ◽  
J. Peterson
Keyword(s):  
High Temperature ◽  
Elastic Recovery ◽  
Asphalt Binders ◽  
Creep Recovery ◽  
Recovery Test

scholarly journals Investigating the Effectiveness of Nano-Montmorillonite on Asphalt Binder from Rheological, Thermodynamics, and Chemical Perspectives

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1433
Author(s):  
Peifeng Cheng ◽  
Zhanming Zhang ◽  
Zonghao Yang ◽  
Jin Xu ◽  
Yiming Li
Keyword(s):  
Free Energy ◽  
High Temperature ◽  
Surface Free Energy ◽  
Chemical Structure ◽  
Sessile Drop ◽  
Elastic Recovery ◽  
Asphalt Binder ◽  
Intermolecular Forces ◽  
Asphalt Binders ◽  
Creep Recovery

In this research, the feasibility of using nano-montmorillonite (MMT) in asphalt binders was investigated in terms of rheological properties, thermomechanical properties, and chemical structure composition. Different doses of MMT were added to the base asphalt and styrene–butadiene–styrene (SBS) asphalt as test subjects. The effect of nanomaterials on the high-temperature resistance of asphalt binders to permanent deformation was analyzed from dynamic mechanical rheology using the multiple stress creep recovery (MSCR) test. The sessile drop method test based on surface free energy (SFE) theory was employed and thermodynamic parameters such as surface free energy, cohesive work, and adhesion work were calculated to analysis the change in energy of the asphalt binder. In addition, changes in the chemical structure and composition of the asphalt binder were examined by Fourier transform infrared (FTIR) and gel permeation chromatography (GPC) tests. The results showed that MMT can effectively enhance the high-temperature elastic recovery and plastic deformation resistance of the asphalt binder. The intercalation structure produced in the asphalt binder enhanced the overall cohesive power and adhesion to the aggregate. The anchoring effect of the intercalation structure resulted in an increase in the macromolecular weight of the binder was demonstrated, indicating that MMT enhanced the overall intermolecular forces of the binder. In addition, the molecular crystal structure was characterized by characteristic functional groups in the infrared spectra, while demonstrating that no chemical reaction occurs during the modification of the binder by the nanomaterials.

scholarly journals Investigation on high-temperature performance of waste-based high-viscosity asphalt binders (WHABs) by repeated creep recovery (RCR) test

2019 ◽  
Vol 46 (5) ◽  
pp. 403-412 ◽  
Author(s):  
Jun Cai ◽  
Yansong Wang ◽  
Di Wang ◽  
Rui Li ◽  
Jiupeng Zhang ◽  
...  
Keyword(s):  
Shear Stress ◽  
High Temperature ◽  
Test Temperature ◽  
Stress Test ◽  
Control Sample ◽  
High Viscosity ◽  
Asphalt Binders ◽  
Creep Recovery ◽  
Time Curve ◽  
Temperature Performance

This study reviewed and compared the test methods for the high-temperature performance of asphalt binder, and selected repeated creep recovery (RCR) test to evaluate the high-temperature performance of three waste-based high-viscosity asphalt binders (WHABs, including D-I, D-II, and F) and a control sample (Tafpack-Super modified asphalt, TMA). Meanwhile, shear stress, test temperature, and aging degree of binders, which could influence high-temperature behavior of binders, were also investigated, and related evaluation indexes including recovery compliance (R), non-recoverable creep compliance (Jnr), and viscous stiffness modulus (Gv) were compared. Results show that WHABs has much better high-temperature performance than TMA; shear stress has the most prominent effect on binders’ high-temperature performance, followed by aging degree, and lastly the selected test temperature in γ–time curve results; R, Jnr, and Gv values results indicate aging degree has a significant effect on binders, and improving binders’ aging performance can greatly improve the high-temperature performance.

Determination of creep compliance of asphalt mixtures at intermediate and high temperature using creep-recovery test

2021 ◽  
pp. 1-22
Author(s):  
H. T. Tai Nguyen ◽  
Tien-Tho Do ◽  
Vu-Tu Tran ◽  
Thanh-Nhan Phan ◽  
Thanh-An Pham ◽  
...  
Keyword(s):  
High Temperature ◽  
Creep Compliance ◽  
Asphalt Mixtures ◽  
Creep Recovery ◽  
Recovery Test

scholarly journals Determination of rutting distresses on hot mix asphalts by advanced techniques

2019 ◽  
Vol 276 ◽  
pp. 03004
Author(s):  
Gabriel Skronka ◽  
Martin Jasso ◽  
Otakar Vacin
Keyword(s):  
Elastic Recovery ◽  
Asphalt Binder ◽  
Sustainable Use ◽  
Asphalt Binders ◽  
Asphalt Pavements ◽  
Creep Recovery ◽  
Shear Stresses ◽  
Pavement Distresses ◽  
Multiple Stress Creep Recovery

The sustainable use of non-renewable natural resources, such as asphalt binder, can be achieved by adequate planning. The proper assessment of asphalt binders is a prerequisite to the appropriate designing of road constructions that can eventually result in pavements in which the development of pavement distresses can be mitigated. Rutting is the most common distress occurring at high temperatures, which is frequently experienced by such countries as Indonesia; thus, the use of adequate asphalt binder in hot mix asphalt pavements results in long-lasting road constructions. By means of advanced techniques, e.g., multiple stress creep recovery test, conducted on a dynamic shear rheometer, it is possible to determine the rutting potential of asphalt binders. This technique, however, still seems to be imprecise at currently determined shear stress values. This paper aims to investigate on the example of ten different asphalt binders, if creep and recovery measured at higher shear stresses result in better correlation with rutting potential of hot mix asphalts than that at the standardized stress levels. Concurrently, other conventional asphalt binder properties (e.g., penetration, softening point, elastic recovery) are determined and compared with rutting.

scholarly journals High temperature properties of modified bituminous binders produced in Poland

2019 ◽  
Vol 262 ◽  
pp. 05011 ◽  
Author(s):  
Piotr Radziszewski ◽  
Michał Sarnowski ◽  
Piotr Pokorski ◽  
Karol J. Kowalski ◽  
Jan Król
Keyword(s):  
High Temperature ◽  
Permanent Deformation ◽  
Creep Recovery ◽  
High Temperature Properties ◽  
Recovery Test ◽  
Modified Binders ◽  
Multiple Stress Creep Recovery ◽  
Bituminous Binders ◽  
Operating Temperatures ◽  
Temperature Test

Bitumen used for the construction of road pavements should exhibit adequate resistance to loads at high operating temperatures. An effective method of improving the properties of bitumen is their modification. To evaluate the high-temperature properties of bitumen, standard consistency tests and advanced rheological tests under dynamic load are conducted. The main purpose of the article is to assess the high temperature properties of modified binders produced by two major Polish producers. The assessment was based on the tests results of modified binders in the range of the standard softening point temperature test and tests in the dynamic shear rheometer (DSR) according to the requirements of Strategic Highway Research Program (SHRP) and Multiple Stress Creep Recovery Test (MSCR). It has been shown that due to the highest operating temperatures of road pavements in Poland, produced bituminous binders meet the requirements of resistance to permanent deformation with a great reserve.

scholarly journals Rheological Properties of Graphene/Polyethylene Composite Modified Asphalt Binder

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3986
Author(s):  
Huan-Yun Zhou ◽  
Huai-Bing Dou ◽  
Xian-Hua Chen
Keyword(s):  
High Temperature ◽  
Rheological Properties ◽  
High Speed ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Creep Recovery ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Asphalt Modification ◽  
Ft Ir

Aiming to improve the comprehensive road performance of asphalt binders, especially the high-temperature performance, a novel asphalt binder was prepared by compounding high-quality and low-cost polyethylene (PE) with graphene (GNPs) using a high-speed shearing machine. The rheological properties and interaction mechanism of PE/GNPs composite modified asphalt were investigated using temperature sweep (TeS), multiple stress creep recovery (MSCR), linear amplitude sweep (LAS) and Fourier transform infrared spectroscopy (FT-IR) and field emission scanning electron microscopy (FESEM). The experimental results demonstrated that GNPs and PE can synergistically improve the high-temperature performance of asphalt binders and enhance the rutting resistance of pavements; the pre-blended PE/GNPs masterbatch has good medium-temperature fatigue and low-temperature cracking resistance. Meanwhile, PE/GNPs dispersed uniformly in the asphalt matrix, and the microstructure and dispersion of premixed PE/GNPs masterbatch facilitated the asphalt modification. No new absorption peaks appeared in the FT-IR spectra of the composite modified asphalt, indicating that asphalt binders were physically modified with GNPs and PE. These findings may cast light on the feasibility of polyethylene/graphene composite for asphalt modification.

scholarly journals Characterization of asphalt binders extracted from field mixtures containing RAP and/or RAS

2022 ◽  
Vol 13 (1) ◽  
pp. 140-152
Author(s):  
Eslam Deef-Allah ◽  
Magdy Abdelrahman
Keyword(s):  
High Temperature ◽  
Rheological Properties ◽  
Asphalt Binder ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Creep Recovery ◽  
Recycled Asphalt ◽  
Reclaimed Asphalt ◽  
Multiple Stress Creep Recovery ◽  
Pavement Construction

The use of reclaimed asphalt pavement (RAP) and/or recycled asphalt shingles (RAS) in the asphalt mixtures is a common practice in the U.S.A. However, there is a controversy to date on how RAP/RAS interact with virgin asphalt binders (VABs) in asphalt mixtures. For mixtures containing RAP/RAS, the aged asphalt binders in RAP and air-blown asphalt binders in RAS alter the performances of the extracted asphalt binders (EABs). Thus, the rheological properties of EABs from these mixtures require more investigation. The focus of this paper was relating the high-temperature properties of EABs from field cores to the corresponding rolling thin film oven aged virgin asphalt binders (RTFO AVABs). Furthermore, a comparison of the effect of RAP and RAS on the high-temperature rheological properties of EABs was another objective. Different asphalt cores were collected from the field within two weeks after the pavement construction process in 2016. These cores represented eight asphalt mixtures with different asphalt binder replacement percentages by RAP, RAS, or both. The asphalt binders were extracted from these mixtures and considered as RTFO AVABs. The high-temperature rheological properties included the temperature sweep and frequency sweep testing and the multiple stress creep recovery testing. The EABs had higher stiffnesses and elasticates than the corresponding RTFO AVABs because of the aged binders in RAP/RAS. The binders in RAP interacted more readily with VABs than RAS binders.

scholarly journals Effect of Biowaste on the High- and Low-Temperature Rheological Properties of Asphalt Binders

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Xuancang Wang ◽  
Yuchen Guo ◽  
Guanyu Ji ◽  
Yi Zhang ◽  
Jing Zhao ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Rheological Properties ◽  
Asphalt Binder ◽  
Oyster Shell ◽  
Asphalt Binders ◽  
Creep Recovery ◽  
Oyster Shell Powder ◽  
Shell Powder ◽  
Rheological Performance

The growth of aquaculture has increased the production of oysters. However, the increased oyster shell volume has created serious environmental and recycling problems for the society. In order to study the sustainable utilization of waste oyster shells, asphalt binder of waste oyster shell powder was prepared by using modified asphalt material with waste oyster shells. The microstructure of oyster shell powder was analyzed by scanning electron microscopy experiments. The chemical composition of the asphalt binder was observed by Fourier transform infrared spectroscopy tests. The physical properties of the asphalt binder, including softness, high-temperature performance, and plastic deformation capacity, were initially evaluated through three indicators’ tests on asphalt. A preliminary performance evaluation of the asphalt binder was performed. The high-temperature stability of asphalt binders was evaluated using dynamic shear rheometry. The rutting resistance of the material was evaluated by temperature sweep tests, and the shear deformation resistance of the material was evaluated by frequency sweep tests. Multiple stress creep recovery tests determine the material’s ability to resist permanent deformation. The low-temperature rheological properties were evaluated by bending beam rheology tests. The study found that the waste oyster shell powder is a biomass with a porous irregular petal shape. No new characteristic absorption peaks are formed by mixing with asphalt. And, it can improve the viscosity, thermal stability, and temperature-sensitive properties of the material. It significantly improved the high-temperature rheological performance, rutting coefficient, and recovery elasticity of the material. However, it has little effect on low-temperature rheological performance. This study provides a solid foundation for the effective use of biowaste in engineering materials.

Sign in / Sign up

Export Citation Format

Share Document