Test Method for Combined Fine and Gross Leaks for Large Hybrid Microcircuit Packages

10.1520/f0816 ◽  
2009 ◽  
Author(s):  
Keyword(s):  
Test Method ◽  
Hybrid Microcircuit

Test Method of Current Leakage for Dielectric Paste

2012 ◽  
Vol 220-223 ◽  
pp. 1573-1576
Author(s):  
Zhi Hong Hou
Keyword(s):  
Glass Substrate ◽  
Dielectric Layer ◽  
Screen Printing ◽  
Test Method ◽  
Conducting Layer ◽  
Current Leakage ◽  
Test Circuit ◽  
Conductive Line ◽  
Hybrid Microcircuit ◽  
Sintering Processes

A test method of current leakage for dielectric paste was proposed by simulating the application processes of dielectric paste for manufacturing the dielectric layer in the multilayer thick film hybrid microcircuit. That is, by screen printing and sintering processes, the sliver conducting layer was fabricated on the surface of glass substrate, and then dielectric layer, finally the glass substrate sample with conducting layer and dielectric layer was dipped in 5 Wt% NaCl aqueous solution. The conductive line was soldered on the silver conducting layer to form the test circuit, and powered with 5 volts direct power, the current in the test circuit was taken as the current leakage of the dielectric paste. The method may be used to evaluate the current leakage of dielectric paste.

Scanning Electron Microscopy in Hybrid Microelectronics

1976 ◽  
Vol 34 ◽  
pp. 456-457
Author(s):  
S. Khadpe ◽  
R. Faryniak
Keyword(s):  
Integrated Circuits ◽  
Thick Film ◽  
Integrated Circuit ◽  
Failure Modes ◽  
Three Dimensional ◽  
Circuit Components ◽  
Hybrid Microcircuit ◽  
Electrical Connections ◽  
Scanning Electron

The Scanning Electron Microscope (SEM) is an important tool in Thick Film Hybrid Microcircuits Manufacturing because of its large depth of focus and three dimensional capability. This paper discusses some of the important areas in which the SEM is used to monitor process control and component failure modes during the various stages of manufacture of a typical hybrid microcircuit.Figure 1 shows a thick film hybrid microcircuit used in a Motorola Paging Receiver. The circuit consists of thick film resistors and conductors screened and fired on a ceramic (aluminum oxide) substrate. Two integrated circuit dice are bonded to the conductors by means of conductive epoxy and electrical connections from each integrated circuit to the substrate are made by ultrasonically bonding 1 mil aluminum wires from the die pads to appropriate conductor pads on the substrate. In addition to the integrated circuits and the resistors, the circuit includes seven chip capacitors soldered onto the substrate. Some of the important considerations involved in the selection and reliability aspects of the hybrid circuit components are: (a) the quality of the substrate; (b) the surface structure of the thick film conductors; (c) the metallization characteristics of the integrated circuit; and (d) the quality of the wire bond interconnections.

Metrological support of individual blood glucose meters in telemedicine

2019 ◽  
pp. 52-56
Author(s):  
Yu.F. Glukhov ◽  
N.V. Krutikov ◽  
A.V. Ivanov ◽  
N.P. Muravskaya
Keyword(s):  
Blood Glucose ◽  
Blood Glucose Level ◽  
Glucose Level ◽  
Measurement Data ◽  
Test Method ◽  
Level Measurement ◽  
Measurement Devices ◽  
Real Practice ◽  
Health Care Centers ◽  
Medical Measurement

We have studied and analyzed status and metrological supervision of blood glucose monitors, individual devices for a person’s blood glucose level measurement. It has been indicated that nowadays blood glucose monitors like other individual devices for medical measurement are not allowed to be involved in telemedicine public service. This accounts for absence of metrological supervision with these measurement devices in telemedicine. In addition, the key problem is absence of safe methods and means of remote verificaition, calibration and transmission of measurement data to health care centers. The article offers a remote test method for blood glucose monitors using a number of resistors with values correlating with measured blood glucose level. The available method has been successfully trialed in real practice.

Sign in / Sign up

Export Citation Format

Share Document