Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish

10.1520/d5678 ◽  
2008 ◽  
Author(s):  
Keyword(s):  
Test Method ◽  
Freeze Thaw ◽  
Floor Polish

Durability of concrete containing chloride-based accelerating admixtures

1990 ◽  
Vol 17 (1) ◽  
pp. 102-112
Author(s):  
T. Rezansoff ◽  
D. Stott
Keyword(s):  
Calcium Chloride ◽  
Dynamic Modulus ◽  
Linseed Oil ◽  
Standard Test ◽  
Test Method ◽  
Concrete Durability ◽  
Freezing And Thawing ◽  
Cement Ratio ◽  
Freeze Thaw ◽  
Water To Cement Ratio

The influence of CaCl2 or a chloride-based accelerating admixture on the freeze–thaw resistance of concrete was evaluated. Three air entrained mix designs were investigated using ASTM C666-84, Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing. All mix designs were similar, using cement contents of 340–357 kg/m3 of concrete, except for the addition of either 2% calcium chloride or 2% High Early Pozzolith, while no accelerating admixture was added to the control mix. The entire test program was repeated four times with water-to-cement ratio of 0.46 and three times with the ratio of 0.43. For the Pozzolith-accelerated concrete, half the samples were coated with boiled linseed oil in all seven series. For the control (unaccelerated) concrete, half the samples were coated with boiled linseed oil in one series for each water-to-cement ratio. Performance was monitored using the dynamic modulus of elasticity as obtained from transverse resonant frequency measurements. Weight loss of the specimens was also measured. Only the control samples (no accelerators) showed sufficient durability to satisfy the standard of maintaining at least 60% of the original dynamic modulus after 300 cycles of alternate freezing and thawing. Sealing with linseed oil showed inconsistent improvement in the durability in the various test series when defined in terms of the dynamic modulus; however, weight losses were the lowest of all categories and surface scaling was minimal. Key words: concrete, durability, freeze–thaw testing, calcium chloride, admixtures, sealants, air void system.

A Test Method to Identify the Onset of Freeze-Thaw Deterioration in Masonry

Masonry 2014 ◽  
2014 ◽  
pp. 197-217 ◽  
Author(s):  
Peter Mensinga ◽  
David De Rose ◽  
John Straube ◽  
Chris Schumacher
Keyword(s):  
Test Method ◽  
Freeze Thaw

Research of Steel Fiber Self-Compacting Concrete Frost Resistance

2012 ◽  
Vol 174-177 ◽  
pp. 721-725 ◽  
Author(s):  
Ming Bao Gao ◽  
Yan Ru Zhao ◽  
Xiao Yan He
Keyword(s):  
Elastic Modulus ◽  
Frost Resistance ◽  
Steel Fiber ◽  
Concrete Specimen ◽  
Test Method ◽  
Dynamic Elastic Modulus ◽  
Self Compacting Concrete ◽  
Freeze Thaw ◽  
Thaw Cycle ◽  
Freeze Thaw Cycle

With the fast freeze-thaw test method, the c50 steel fiber self-compacting concrete was carried out 300 tests of freeze-thaw cycle. In the process of freeze-thaw cycles, it determined by the quality of the concrete specimen, dynamic elastic modulus and strength, and analyzed the steel fibers and their different contents on frost resistance of self-compacting concrete impact. The results showed that: steel fiber self-compacting concrete in freeze-thaw cycle can play constrained role in the quality loss, dynamic elastic modulus and intensity, and can significantly improve the self-compacting concrete frost resistance. Within a certain range, the more steel fiber, the stronger of frost resistance.

Sign in / Sign up

Export Citation Format

Share Document