Design Estimations and Channel Capacity Calculations for Spatial, Polarized MIMO Antenna System for Mobile Applications

2016 ◽  
Vol 1 (6) ◽  
pp. 156-161
Author(s):  
Muhammad USMAN
Keyword(s):  
Channel Capacity ◽  
Mobile Applications ◽  
Antenna System ◽  
Mimo Antenna

scholarly journals Modified MIMO Cube for Enhanced Channel Capacity

2012 ◽  
Vol 2012 ◽  
pp. 1-10
Author(s):  
Lajos Nagy
Keyword(s):  
Frequency Dependence ◽  
Channel Capacity ◽  
Indoor Environment ◽  
Antenna System ◽  
Mimo Antenna ◽  
Simulation Results

This paper deals with the optimization of MIMO antenna elements' position in modified MIMO cube for getting maximal channel capacity in indoor environment. The dependence of the channel capacity on the antenna orientation was analyzed by simulations. We have also examined the effect of the frequency dependence of the antenna system (in case of conjugate matching and nonconjugate matching) for the channel capacity. Based on the simulation results in the created and measured antenna system, the antennas were at a right angle to each other. At the two chosen different structures, we measured the antenna parameters and the channel capacity. In this paper, we present the results of the measurements which clearly confirm our simulations. We will point out the differences between the two antenna structures.

Anl-shaped 4-element monopole MIMO antenna system with enhanced isolation for mobile applications

2016 ◽  
Vol 58 (11) ◽  
pp. 2587-2591 ◽  
Author(s):  
M. Ikram ◽  
R. Hussain ◽  
O. Hammi ◽  
M. S. Sharawi
Keyword(s):  
Mobile Applications ◽  
Antenna System ◽  
Mimo Antenna

scholarly journals Full-Azimuth Beam Steering MIMO Antenna Arranged in a Daisy Chain Array Structure

Micromachines ◽  
2020 ◽  
Vol 11 (9) ◽  
pp. 871
Author(s):  
Kazuhiro Honda ◽  
Taiki Fukushima ◽  
Koichi Ogawa
Keyword(s):  
Channel Capacity ◽  
Transmission Rate ◽  
Beam Steering ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Noise Power ◽  
Mimo Antenna ◽  
Input Multiple Output ◽  
Array Structure ◽  
Incident Waves

This paper presents a multiple-input, multiple-output (MIMO) antenna system with the ability to perform full-azimuth beam steering, and with the aim of realizing greater than 20 Gbps vehicular communications. The MIMO antenna described in this paper comprises 64 elements arranged in a daisy chain array structure, where 32 subarrays are formed by pairing elements in each subarray; the antenna yields 32 independent subchannels for MIMO transmission, and covers all communication targets regardless of their position relative to the array. Analytical results reveal that the proposed antenna system can provide a channel capacity of more than 200 bits/s/Hz at a signal-to-noise power ratio (SNR) of 30 dB over the whole azimuth, which is equivalent to 20 Gbps for a bandwidth of 100 MHz. This remarkably high channel capacity is shown to be due to two significant factors; the improved directivity created by the optimum in-phase excitation and the low correlation between the subarrays due to the orthogonal alignment of the array with respect to the incident waves. Over-the-air (OTA) experiments confirm the increase in channel capacity; the proposed antenna can maintain a constant transmission rate over all azimuth angles.

scholarly journals Design of a Compact Dual-Band MIMO Antenna System with High-Diversity Gain Performance in Both Frequency Bands

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 383
Author(s):  
Wazie M. Abdulkawi ◽  
Waqar Ahmad Malik ◽  
Sajjad Ur Rehman ◽  
Abdul Aziz ◽  
Abdel Fattah A. Sheta ◽  
...  
Keyword(s):  
Channel Capacity ◽  
Frequency Band ◽  
Wide Band ◽  
Antenna System ◽  
Dual Band ◽  
Frequency Bands ◽  
Mimo Antenna ◽  
Capacity Loss ◽  
Lower Frequency Band ◽  
Code Division Multiple

A compact four-element dual-band multiple-input and multiple-output (MIMO) antenna system is proposed to achieve high isolation and low channel capacity loss. The MIMO antenna was designed and optimized to cover the dual-frequency bands; the first frequency band is a wide band, and it covers the frequency range of 1550–2650 MHz, while the other frequency band covers the 3350–3650 MHz range. The measured wide-band impedance bandwidths of 1.1 GHz and 300 MHz were achieved in the lower and upper frequency bands, respectively. The proposed structure consists of four novel antenna elements, along with a plus-sign-shaped ground structure on an FR4 substrate. The overall electrical size of the whole dual-band MIMO antenna system is 0.3λ(W) × 0.3λ(L) × 0.008λ(H) for the lower frequency band. It achieved greater than 10 and 19 dB isolation in the lower and upper frequency bands, respectively. The antenna system accomplished an envelope correlation coefficient of |ρ|≤0.08 in the lower frequency band, while it achieved |ρ|≤0.02 in the higher frequency band. The computed channel capacity loss remained less than almost 0.4 bits/s/Hz in both frequency bands. Therefore, it achieved good performance in both frequency bands, with the additional advantage of a compact size. The proposed MIMO antenna is suitable for compact handheld devices and smartphones used for GSM (Global System for Mobiles), UMTS (Universal Mobile Telecommunications Service), WCDMA (Wideband Code Division Multiple Access), LTE (Long Term Evolution), 5G sub-6 GHz, PCS (Personal Communications Service), and WLAN (wireless local area network) applications.

Sign in / Sign up

Export Citation Format

Share Document