scholarly journals Full-Azimuth Beam Steering MIMO Antenna Arranged in a Daisy Chain Array Structure

Micromachines ◽  
2020 ◽  
Vol 11 (9) ◽  
pp. 871
Author(s):  
Kazuhiro Honda ◽  
Taiki Fukushima ◽  
Koichi Ogawa
Keyword(s):  
Channel Capacity ◽  
Transmission Rate ◽  
Beam Steering ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Noise Power ◽  
Mimo Antenna ◽  
Input Multiple Output ◽  
Array Structure ◽  
Incident Waves

This paper presents a multiple-input, multiple-output (MIMO) antenna system with the ability to perform full-azimuth beam steering, and with the aim of realizing greater than 20 Gbps vehicular communications. The MIMO antenna described in this paper comprises 64 elements arranged in a daisy chain array structure, where 32 subarrays are formed by pairing elements in each subarray; the antenna yields 32 independent subchannels for MIMO transmission, and covers all communication targets regardless of their position relative to the array. Analytical results reveal that the proposed antenna system can provide a channel capacity of more than 200 bits/s/Hz at a signal-to-noise power ratio (SNR) of 30 dB over the whole azimuth, which is equivalent to 20 Gbps for a bandwidth of 100 MHz. This remarkably high channel capacity is shown to be due to two significant factors; the improved directivity created by the optimum in-phase excitation and the low correlation between the subarrays due to the orthogonal alignment of the array with respect to the incident waves. Over-the-air (OTA) experiments confirm the increase in channel capacity; the proposed antenna can maintain a constant transmission rate over all azimuth angles.

scholarly journals PENGARUH PENYUSUNAN POLARISASI PADA SISTEM ANTENA MIMO TERHADAP KAPASITAS KANAL

2020 ◽  
Vol 5 (1) ◽  
pp. 13
Author(s):  
Abdurrahman Rizki ◽  
Alloysius Adya Pramudita ◽  
Trasma Yunita
Keyword(s):  
Circular Polarization ◽  
Channel Capacity ◽  
Mimo System ◽  
Signal To Noise Ratio ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Mimo Antenna ◽  
Left Hand ◽  
Multiple Input ◽  
Input Multiple Output

Multiple Input Multiple Output (MIMO) system is a technology that has the potential to be developed to increase channel capacity. The increase in channel capacity in the MIMO system is not only determined by the number of antennas, but is determined by the characteristics and arrangement of the antenna concept. This study identifies the effect of circular polarization on the MIMO antenna system on channel capacity. Co-polarization consists of a Left Hand Circular Polarization (LHCP) and Right Hand Circular Polarization (RHCP) configuration, while cross-polarization consists of an RHCP-LHCP configuration. The co-polarization of the antenna with the LHCP configuration results in an estimated channel capacity of 11,578 bps / Hz when it is at the lowest Signal to Noise Ratio (SNR) is 5 dB

scholarly journals A Graphene-Assembled Film Based MIMO Antenna Array with High Isolation for 5G Wireless Communication

2021 ◽  
Vol 11 (5) ◽  
pp. 2382
Author(s):  
Rongguo Song ◽  
Xiaoxiao Chen ◽  
Shaoqiu Jiang ◽  
Zelong Hu ◽  
Tianye Liu ◽  
...  
Keyword(s):  
Antenna Array ◽  
Antenna Arrays ◽  
Multiple Input Multiple Output ◽  
Frequency Selective Surface ◽  
Antenna System ◽  
Antenna Element ◽  
Mimo Antenna ◽  
High Isolation ◽  
Input Multiple Output ◽  
Alternative Material

With the development of 5G, Internet of Things, and smart home technologies, miniaturized and compact multi-antenna systems and multiple-input multiple-output (MIMO) antenna arrays have attracted increasing attention. Reducing the coupling between antenna elements is essential to improving the performance of such MIMO antenna system. In this work, we proposed a graphene-assembled, as an alternative material rather than metal, film-based MIMO antenna array with high isolation for 5G application. The isolation of the antenna element is improved by a graphene assembly film (GAF) frequency selective surface and isolation strip. It is shown that the GAF antenna element operated at 3.5 GHz has the realized gain of 2.87 dBi. The addition of the decoupling structure improves the isolation of the MIMO antenna array to more than 10 dB and corrects the antenna radiation pattern and operating frequency. The isolation between antenna elements with an interval of 0.4λ is above 25 dB. All experimental results show that the GAF antenna and decoupling structure are efficient devices for 5G mobile communication.

scholarly journals Mutual Coupling Reduction of DRA for MIMO Applications

2019 ◽  
Vol 8 (1) ◽  
pp. 75-81
Author(s):  
N. Al Shalaby ◽  
S. G. El-Sherbiny
Keyword(s):  
Mutual Coupling ◽  
Dielectric Material ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Parasitic Element ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Element Method

In this paper, A multiple input Multiple Output (MIMO) antenna using two Square Dielectric Resonators (SDRs) is introduced. The mutual coupling between the two SDRAs is reduced using two different methods; the first method is based on splitting a spiral slot in the ground plane, then filling the slot with dielectric material, "E.=2.2". The second method is based on inserting a copper parasitic element, having the same shape of the splitted Spiral, between the two SDRAs.  The effect of replacing the copper parasitic element with Carbon nanotubes (CNTs) parasitic element "SOC12 doped long-MWCNT BP" is also studied. The antenna system is designed to operate at 6 GHz. The analysis and simulations are carried out using finite element method (FEM). The defected ground plane method gives a maximum isolation of l8dB at element spacing of 30mm (0.6λo), whereas the parasitic element method gives a maximum isolation of 42.5dB at the same element spacing.

scholarly journals Nature Inspired MIMO Antenna System for Future mmWave Technologies

Micromachines ◽  
2020 ◽  
Vol 11 (12) ◽  
pp. 1083
Author(s):  
Saifur Rahman ◽  
Xin-cheng Ren ◽  
Ahsan Altaf ◽  
Muhammad Irfan ◽  
Mujeeb Abdullah ◽  
...  
Keyword(s):  
Communication Systems ◽  
High Efficiency ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Potential Candidate ◽  
Mimo Antenna ◽  
Communication Devices ◽  
Input Multiple Output ◽  
Measured Efficiency ◽  
5G Communication

In this work, a new Multiple Input Multiple Output (MIMO) antenna system with a novel shape inspired by nature is proposed for Fifth-Generation (5G) communication systems. The antenna is designed on a Rogers 5880. The dielectric constant of the substrate is 2.2, and the loss tangent is assumed to be 0.0009. The gain of the system for the desired bandwidth is nearly 8 dB. The simulated and the measured efficiency of the proposed system is 95% and 80%, respectively. To demonstrate the capability of the system as a potential candidate for future 5G communication devices, MIMO key performance parameters such as the Envelope Correlation Coefficient (ECC) and Diversity Gain (DG) are computed. It is found that the proposed system has low ECC, constant DG, and high efficiency for the desired bandwidth.

scholarly journals Modified U-Shaped Resonator as Decoupling Structure in MIMO Antenna

Electronics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1321
Author(s):  
Amjad Iqbal ◽  
Ahsan Altaf ◽  
Mujeeb Abdullah ◽  
Mohammad Alibakhshikenari ◽  
Ernesto Limiti ◽  
...  
Keyword(s):  
Multiple Input Multiple Output ◽  
Equivalent Circuit Model ◽  
Separation Distance ◽  
Antenna System ◽  
Parametric Modelling ◽  
Mimo Antenna ◽  
Antenna Performance ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Simple Assembly

This paper presents an isolation enhancement of two closely packed multiple-input multiple-output (MIMO) antenna system using a modified U-shaped resonator. The modified U-shaped resonator is placed between two closely packed radiating elements resonating at 5.4 GHz with an edge to edge separation distance of 5.82 mm (λ∘/10). Through careful adjustment of parametric modelling, the isolation level of −23 dB among the densely packed elements is achieved. The coupling behaviour of the MIMO elements is analysed by accurately designing the equivalent circuit model in each step. The antenna performance is realized in the presence and absence of decoupling structure, and the results shows negligible effects on the antenna performance apart from mutual coupling. The simple assembly of the proposed modified U-shaped isolating structure makes it useful for several linked applications. The proposed decoupling structure is compact in nature, suppress the undesirable coupling generated by surface wave and nearby fields, and is easy to fabricate.

scholarly journals A Novel 2.4-GHz Low-Profile Smart MIMO Antenna with Reconfigurable Frequency-Selective Reflectors

2020 ◽  
Vol 9 (2) ◽  
pp. 42-51
Author(s):  
C.-H. Tsai ◽  
J.-S. Sun ◽  
S.-J. Chung ◽  
J.-H. Tarng
Keyword(s):  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Switching Network ◽  
Ieee 802.11A ◽  
Mimo Antenna ◽  
Low Profile ◽  
Specific Direction ◽  
Input Multiple Output ◽  
Frequency Selective ◽  
Beam Switching

In this paper, a new low-profile smart multiple-input multiple-output (MIMO) antenna system is presented for WiFi IEEE 802.11a/b/g/n/ac/ax applications. The proposed compact 2.4-GHz antenna system employs two beam-switching antenna cells for MIMO operation. Each antenna cell is composed of four reconfigurable frequency-selective reflectors (RFSRs) and a one-to-four switching feeding network. The RFSRs are constructed using a one-wavelength metal loop resonator, which functions as a radiating antenna or a wave reflector to reflect beams along a specific direction, as controlled by the switching network. The feeding switching network utilizes PIN diodes to adjust the phase and impedance required for changing the operational status of each RFSR. The overall dimensions of the antenna system, including the metallic ground, are 120 mm ´ 120 mm ´ 9.5 mm. Moreover, the measured operational bandwidth of the 2.4-GHz antenna is approximately 100 MHz, and the radiation efficiency of each directed beam is 40%–70%.

scholarly journals Wideband MIMO antenna for SCADA Wireless Communication Backhaul Application

2021 ◽  
Vol 12 (3) ◽  
pp. 4538-4547
Author(s):  
Nur Zafirah Bt Muhammad Zubir Et.al
Keyword(s):  
Wireless Communication ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Radiation Characteristic ◽  
Antenna System ◽  
Mobile Telecommunication ◽  
Telecommunication System ◽  
Antenna Structure ◽  
Mimo Antenna ◽  
Input Multiple Output

A wideband multiple-input-multiple-output (MIMO) antenna system with common elements suitable for SCADA wireless communication backhaul application which is operating frequency of 0.85-2.6GHz that can cover global system for mobile communication (GSM) 900MHz and 1.8GHz, The Universal Mobile Telecommunication System (UMTS) 2GHz, Wi-Fi (2.4GHz) and Long Term Evolution (LTE) 2.6GHz is proposed. The proposed MIMO antenna system consists of four microstrip feedline with common radiating element and a frame shaped ground plane. A single port antenna also was designed and presented in this paper to show the process to design wideband MIMO antenna structure. The radiator of the MIMO antenna system is designed as the shape of modified rectangle with straight line at each corner to enhance the bandwidth frequency. To improve the isolation between ports, the ground plane is modified by inserting four L-slots in each corner to reduce mutual coupling. For an antenna efficiency of more than 60%, the simulated reflection coefficients are below -10dB for all ports at expected frequency. Simulated isolation is achieved greater than -10dB by using a modified ground plane. Also, a low envelope correlation coefficient (ECC) less than 0.1 and polarization diversity gain of about 10dB with the orthogonal mode of linear polarization and omnidirectional pattern during the analysis of the radiation characteristic are achieved. Therefore, the proposed design can be used for SCADA wireless communication backhaul application.

scholarly journals Design of a compact hexagonal structured dual band MIMO antenna using orthogonal polarization for WLAN and satellite applications

2019 ◽  
Vol 9 (5) ◽  
pp. 4217
Author(s):  
Aziz Dkiouak ◽  
Mohssine El Ouahabi ◽  
Alia Zakriti ◽  
Mohsine Khalladi ◽  
Aicha Mchbal
Keyword(s):  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Dual Band ◽  
Orthogonal Polarization ◽  
Mimo Antenna ◽  
X Band ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Satellite Applications ◽  
Strip Lines

In this paper, a compact dual band multiple-input multiple-output (MIMO) antenna system for WLAN and X-band satellite applications (2.4/9.8 GHz respectively) is proposed. On the top face of the substrate, two antenna elements with a size of 20 × 24 mm2 are placed side by side and fed with matched orthogonal micro-strip lines. The two antenna elements have orthogonal polarization which can reduce the mutual coupling between its ports. The designed antenna system is fabricated and measured to validate the simulation results. The impedance bandwidths are about 370 MHz (2.19 to 2.56 GHz) and 630 MHz (9.44 to 10.07 GHz), while the obtained isolation is greater than 14 dB at the operating bands. Furthermore, the envelope correlation is less than 0.052 and 0.008 at 2.4 and 9.8 GHz, respectively. Hence the diversity gain is higher than 9.98 in the frequency bands of interest.

A Frequency Reconfigurable MIMO Antenna System for Cognitive Radio Applications

Frequenz ◽  
2017 ◽  
Vol 71 (11-12) ◽  
Author(s):  
A. Raza ◽  
Muhammad U. Khan ◽  
Farooq A. Tahir
Keyword(s):  
Patch Antenna ◽  
Reverse Bias ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Reverse Bias Voltage ◽  
Frequency Sweep ◽  
Mimo Antenna ◽  
Varactor Diodes ◽  
Multiple Input ◽  
Input Multiple Output

AbstractIn this paper, a two element frequency reconfigurable multiple-input-multiple-output (MIMO) antenna system is presented. The proposed antenna consists of miniaturized patch antenna elements, loaded with varactor diodes to achieve frequency reconfigurability. The antenna has bandwidth of 30 MHz and provides a smooth frequency sweep from 2.12 GHz to 2.4 GHz by varying the reverse bias voltage of varactor diode. The antenna is designed on an FR4 substrate and occupies a space of 50×100 × 0.8 mm

Eight-Element Antenna Array for LTE 3.4–3.8 GHz Mobile Handset Applications

Frequenz ◽  
2017 ◽  
Vol 71 (5-6) ◽  
Author(s):  
Lingsheng Yang ◽  
Ming Ji ◽  
Biyu Cheng ◽  
Bo Ni
Keyword(s):  
Antenna Array ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Operating Band ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Mobile Handset

AbstractIn this letter, an eight-element Multiple-input multiple-output (MIMO) antenna system for LTE mobile handset applications is proposed. The antenna array consists of eight 3D inverted F-shaped antennas (3D-IFA), and the measured –10 dB impedance bandwidth is 3.2–3.9 GHz which can cover the LTE bands 42 and 43 (3.4–3.8 GHz). By controlling the rotation of the antenna elements, no less than 10 dB isolation between antenna elements can be obtained. After using the specially designed meandered slots on the ground as decoupling structures, the measured isolation can be further improved to higher than 13 dB between the antenna elements at the whole operating band.

Sign in / Sign up

Export Citation Format

Share Document