Bi-layered electrospun nanofibrous polyurethane-gelatin scaffold with targeted heparin release profiles for tissue engineering applications

2017 ◽  
Vol 37 (9) ◽  
pp. 933-941 ◽  
Author(s):  
Mohammad Mahdi Safikhani ◽  
Ali Zamanian ◽  
Farnaz Ghorbani ◽  
Azadeh Asefnejad ◽  
Mostafa Shahrezaee
Keyword(s):  
Tissue Engineering ◽  
High Surface ◽  
High Surface Area ◽  
Three Dimensional ◽  
Coagulation Factor ◽  
Volume Ratio ◽  
Fibroblast Cell ◽  
Porous Scaffolds ◽  
Nanofibrous Scaffolds

Abstract Tissue engineering is a biotechnology that is used to develop biological substitutes to restore, maintain, or improve functions. Thus, the porous scaffolds are used to accommodate cells in tissue engineering. In this research, three dimensional (3D) bi-layered polyurethane (PU)-gelatin nanofibrous scaffolds were prepared by the electrospinning method, after which the capability of the released heparin as an anti-coagulation factor was evaluated. Electrospinning has been extensively investigated for the preparation of fibers that exhibit a high surface area to volume ratio. Results showed that scanning electron microscopy (SEM) micrographs exhibited a smooth surface as well as a highly porous and bead-free structure, in which fibers were distributed in the range of 100–600 nm. The modulus and ultimate tensile strength (UTS) decreased and increased, respectively, after crosslinking the reaction of polymers. This process also reduced swelling ratio, the hydrolytic biodegradation rate, and the release rate as a function of time. Moreover, an in vitro assay demonstrated that 3D nanofibrous scaffolds supported L929 fibroblast cell viability and that cells adhered and spread on the fibers. Based on the obtained results, the heparin-loaded electrospinning nanofibrous scaffolds have initial physicochemical and mechanical properties to protect neo-tissue formation.

scholarly journals Basic Potential of Carbon Nanotubes in Tissue Engineering Applications

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Hisao Haniu ◽  
Naoto Saito ◽  
Yoshikazu Matsuda ◽  
Tamotsu Tsukahara ◽  
Yuki Usui ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Tissue Engineering ◽  
High Surface ◽  
High Surface Area ◽  
Volume Ratio ◽  
Medical Application ◽  
Mechanical And Thermal Properties ◽  
Biological Responses

Carbon nanotubes (CNTs) are attracting interest in various fields of science because they possess a high surface area-to-volume ratio and excellent electronic, mechanical, and thermal properties. Various medical applications of CNTs are expected, and the properties of CNTs have been greatly improved for use in biomaterials. However, the safety of CNTs remains unclear, which impedes their medical application. Our group is evaluating the biological responses of multiwall CNTs (MWCNTs)in vivoandin vitrofor the promotion of tissue regeneration as safe scaffold materials. We recently showed that intracellular accumulation is important for the cytotoxicity of CNTs, and we reported the active physiological functions CNTs in cells. In this review, we describe the effects of CNTsin vivoandin vitroobserved by our group from the standpoint of tissue engineering, and we introduce the findings of other research groups.

scholarly journals Preparation and Characterization of Biocompatible Electrospun Nanofiber Scaffolds

2018 ◽  
Vol 62 (4) ◽  
Author(s):  
Edit Hirsch ◽  
Márió Nacsa ◽  
Ferenc Ender ◽  
Miklós Mohai ◽  
Zsombor K. Nagy ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
High Surface ◽  
High Surface Area ◽  
Volume Ratio ◽  
Surface Characteristic ◽  
Poly Lactic Acid ◽  
Nanofibrous Scaffolds ◽  
Plasma Surface Treatment ◽  
Nanoscale Fibers ◽  
Solution Electrospinning

Nanoscale fibers were prepared for the fabrication of scaffolds by using a strong electrostatic field on the polymer solution. Electrospinning is widely applied for production of drug delivery, tissue engineering, and regenerative medicine systems as well as biosensors and enzyme immobilization. Nanofibers, thanks to their high surface area to volume ratio, can also mimic the extracellular matrix, thus it has been recognized as a suitable technique for the fast fabrication of scaffolds. This article demonstrates the fabrication of several nanofibrous scaffolds from biopolymers such as polycaprolactone, poly(lactic acid), poly(lactide-co-glycolide), poly(lactide-co-caprolactone) and poly(hydroxybutyrate-co-hydroxy valerate). The characterization and comparison of the scaffolds were achieved based on the morphology and surface characteristic of the nanofibers. The samples showed hydrophobic characteristic, thus a plasma surface treatment was applied successfully to increase hydrophilicity and the effect of the treatment was evaluated based on the wettability and the change in elemental composition of the surface based on X-ray photoelectron spectroscopy.

Preparation of Electrospun PLA Nanofiber Scaffold and the Evaluation In Vitro

2005 ◽  
Vol 288-289 ◽  
pp. 139-142 ◽  
Author(s):  
Xian Tao Wen ◽  
Hong Song Fan ◽  
Yan Fei Tan ◽  
H.D. Cao ◽  
H. Li ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Soft Tissue ◽  
High Surface ◽  
Volume Ratio ◽  
Electrospinning Process ◽  
High Porosity ◽  
Electrospun Scaffold ◽  
Nanofiber Scaffold ◽  
Soft Tissue Engineering

A electrospinning process to prepare soft tissue engineering scaffold was introduced in this study. This kind of scaffold was composed with ultrathin fiber and characterized with high porosity, well-interconnected pores and high surface-to-volume ratio. Biodegradable polylaticacid (PLA) was used to spin the scaffold and the scaffold was evaluated in vitro by analysis the microscopic structure, porosity, mechanical property, especially cytocompatibility. The results indicated that the electrospun PLA scaffold showed good cytocompatibility and the tensile property of electrospun scaffold was similar to human’s soft tissue. It could be expected that the electrospun scaffold would be potential in soft tissue engineering or soft tissue repair.

Thermal Conductance of a Surface Phonon-Polariton Crystal Made up of Polar Nanorods

2017 ◽  
Vol 72 (2) ◽  
pp. 135-139 ◽  
Author(s):  
Jose Ordonez-Miranda ◽  
Karl Joulain ◽  
Younes Ezzahri
Keyword(s):  
Energy Transport ◽  
High Surface ◽  
High Surface Area ◽  
Three Dimensional ◽  
Thermal Conductance ◽  
Volume Ratio ◽  
Phonon Thermal Conductivity ◽  
Propagation Length ◽  
Surface Phonon ◽  
Surface Phonon Polariton

AbstractWe demonstrate that the energy transport of surface phonon-polaritons can be large enough to be observable in a crystal made up of a three-dimensional assembly of nanorods of silicon carbide. The ultralow phonon thermal conductivity of this nanostructure along with its high surface area-to-volume ratio allows the predominance of the polariton energy over that generated by phonons. The dispersion relation, propagation length, and thermal conductance of polaritons are numerically determined as functions of the radius and temperature of the nanorods. It is shown that the thermal conductance of a crystal with nanorods at 500 K and diameter (length) of 200 nm (20 μm) is 0.55 nW·K−1, which is comparable to the quantum of thermal conductance of polar nanowires.

scholarly journals Inflight fiber printing toward array and 3D optoelectronic and sensing architectures

2020 ◽  
Vol 6 (40) ◽  
pp. eaba0931
Author(s):  
Wenyu Wang ◽  
Karim Ouaras ◽  
Alexandra L. Rutz ◽  
Xia Li ◽  
Magda Gerigk ◽  
...  
Keyword(s):  
High Surface ◽  
High Surface Area ◽  
Three Dimensional ◽  
Small Diameter ◽  
Volume Ratio ◽  
Spatiotemporal Resolution ◽  
Fiber Arrays ◽  
Conventional Film ◽  
A Cell ◽  
One Step

Scalability and device integration have been prevailing issues limiting our ability in harnessing the potential of small-diameter conducting fibers. We report inflight fiber printing (iFP), a one-step process that integrates conducting fiber production and fiber-to-circuit connection. Inorganic (silver) or organic {PEDOT:PSS [poly(3,4-ethylenedioxythiophene) polystyrene sulfonate]} fibers with 1- to 3-μm diameters are fabricated, with the fiber arrays exhibiting more than 95% transmittance (350 to 750 nm). The high surface area–to–volume ratio, permissiveness, and transparency of the fiber arrays were exploited to construct sensing and optoelectronic architectures. We show the PEDOT:PSS fibers as a cell-interfaced impedimetric sensor, a three-dimensional (3D) moisture flow sensor, and noncontact, wearable/portable respiratory sensors. The capability to design suspended fibers, networks of homo cross-junctions and hetero cross-junctions, and coupling iFP fibers with 3D-printed parts paves the way to additive manufacturing of fiber-based 3D devices with multilatitude functions and superior spatiotemporal resolution, beyond conventional film-based device architectures.

Development of HA-PLGA Scaffold Encapsulating Intact BMP-2 Using Solid Freeform Fabrication Technology

2011 ◽  
Author(s):  
Jin-Hyung Shim ◽  
Jong Young Kim ◽  
Kyung Shin Kang ◽  
Jung Kyu Park ◽  
Sei Kwang Hahn ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Regeneration ◽  
Porous Scaffold ◽  
Solid Freeform Fabrication ◽  
Three Dimensional ◽  
Porous Scaffolds ◽  
Prolonged Release ◽  
Cellular Activity ◽  
Freeform Fabrication

Tissue engineering is an interdisciplinary field that focuses on restoring and repairing tissues or organs. Cells, scaffolds, and biomolecules are recognized as three main components of tissue engineering. Solid freeform fabrication (SFF) technology is required to fabricate three-dimensional (3D) porous scaffolds to provide a 3D environment for cellular activity. SFF technology is especially advantageous for achieving a fully interconnected, porous scaffold. Bone morphogenic protein-2 (BMP-2), an important biomolecule, is widely used in bone tissue engineering to enhance bone regeneration activity. However, methods for the direct incorporation of intact BMP-2 within 3D scaffolds are rare. In this work, 3D porous scaffolds with poly(lactic-co-glycolic acid) chemically grafted hyaluronic acid (HA-PLGA), in which intact BMP-2 was directly encapsulated, were successfully fabricated using SFF technology. BMP-2 was previously protected by poly(ethylene glycol) (PEG), and the BMP-2/PEG complex was incorporated in HA-PLGA using an organic solvent. The HAPLGA/PEG/BMP-2 mixture was dissolved in chloroform and deposited via a multi-head deposition system (MHDS), one type of SFF technology, to fabricate a scaffold for tissue engineering. An additional air blower system and suction were installed in the MHDS for the solvent-based fabrication method. An in vitro evaluation of BMP-2 release was conducted, and prolonged release of intact BMP-2, for up to 28 days, was confirmed. After confirmation of advanced proliferation of pre osteoblasts, a superior differentiation effect of the HA-PLGA/PEG/BMP-2 scaffold was validated by measuring high expression levels of bone-specific markers, such as alkaline phosphatase (ALP) and osteocalcin (OC). We show that our solvent-based fabrication is a non-toxic method for restoring cellular activity. Moreover, the HAPLGA/PEG/BMP-2 scaffold was effective for bone regeneration.

scholarly journals Differential chondro- and osteo-stimulation in three-dimensional porous scaffolds with different topological surfaces provides a design strategy for biphasic osteochondral engineering

2019 ◽  
Vol 10 ◽  
pp. 204173141982643 ◽  
Author(s):  
Chinmaya Mahapatra ◽  
Jung-Ju Kim ◽  
Jung-Hwan Lee ◽  
Guang-Zhen Jin ◽  
Jonathan C Knowles ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
Three Dimensional ◽  
Poly Lactic Acid ◽  
Porous Scaffolds ◽  
Salt Leaching ◽  
Matrix Adhesion ◽  
Nanofibrous Scaffolds ◽  
Differential Properties

Bone/cartilage interfacial tissue engineering needs to satisfy the differential properties and architectures of the osteochondral region. Therefore, biphasic or multiphasic scaffolds that aim to mimic the gradient hierarchy are widely used. Here, we find that two differently structured (topographically) three-dimensional scaffolds, namely, “dense” and “nanofibrous” surfaces, show differential stimulation in osteo- and chondro-responses of cells. While the nanofibrous scaffolds accelerate the osteogenesis of mesenchymal stem cells, the dense scaffolds are better in preserving the phenotypes of chondrocytes. Two types of porous scaffolds, generated by a salt-leaching method combined with a phase-separation process using the poly(lactic acid) composition, had a similar level of porosity (~90%) and pore size (~150 μm). The major difference in the surface nanostructure led to substantial changes in the surface area and water hydrophilicity (nanofibrous ≫ dense); as a result, the nanofibrous scaffolds increased the cell-to-matrix adhesion of mesenchymal stem cells significantly while decreasing the cell-to-cell contracts. Importantly, the chondrocytes, when cultured on nanofibrous scaffolds, were prone to lose their phenotype, including reduced chondrogenic expressions (SOX-9, collagen type II, and Aggrecan) and glycosaminoglycan content, which was ascribed to the enhanced cell–matrix adhesion with reduced cell–cell contacts. On the contrary, the osteogenesis of mesenchymal stem cells was significantly accelerated by the improved cell-to-matrix adhesion, as evidenced in the enhanced osteogenic expressions (RUNX2, bone sialoprotein, and osteopontin) and cellular mineralization. Based on these findings, we consider that the dense scaffold is preferentially used for the chondral-part, whereas the nanofibrous structure is suitable for osteo-part, to provide an optimal biphasic matrix environment for osteochondral tissue engineering.

Sol-gel-derived glass scaffold with high pore interconnectivity and enhanced bioactivity

2009 ◽  
Vol 24 (12) ◽  
pp. 3495-3502 ◽  
Author(s):  
Ana C. Marques ◽  
Rui M. Almeida ◽  
Amath Thiema ◽  
Shaojie Wang ◽  
Matthias Falk ◽  
...  
Keyword(s):  
Exchange Process ◽  
High Surface ◽  
Sol Gel ◽  
High Surface Area ◽  
Three Dimensional ◽  
Average Diameter ◽  
Solvent Exchange ◽  
Sol Gel Transition ◽  
The One

We report on the preparation of a bioactive CaO–SiO2 monolithic scaffold with interconnected bimodal nanomacro porosity, which simulates the morphology of a natural trabecular bone, by a newly developed modified sol-gel process. This method inherently creates nanopores, whose average diameter can be tailored to approximately 5–20 nm by solvent exchange. To achieve interconnected macroporosity (pores ∼5–300 μm in size), a polymer [poly(ethylene oxide)] is added, which causes phase separation simultaneously with the sol-gel transition. High-resolution scanning electron microscopy and mercury intrusion porosimetry demonstrate a high degree of three-dimensional interconnectivity and sharp distributions of pore size. In vitro bioactivity tests in simulated body fluid (SBF) show bioactivity of the material after soaking for approximately 5 h, as verified by the formation of a hydroxyapatite layer deep into the scaffold structure. Analysis of the SBF after the reaction indicates the dissolution of the samples, another desired feature of temporary scaffolds for bone regeneration. MG63 osteoblast-like cells seeded on our sol-gel glass samples responded better to samples with nanopores enlarged by a solvent exchange process than to the one with normal nanopores. Thus, the benefits of the high surface area achieved by sol-gel and solvent exchange procedures are most clearly demonstrated for the first time.

scholarly journals Biosynthesis and characterization of gold nanoparticles using Brazilian red propolis and evaluation of its antimicrobial and anticancer activities

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
C. E. A. Botteon ◽  
L. B. Silva ◽  
G. V. Ccana-Ccapatinta ◽  
T. S. Silva ◽  
S. R. Ambrosio ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Antimicrobial Agents ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Volume Ratio ◽  
Antimicrobial Activities ◽  
Biological Properties ◽  
Anticancer Activities

AbstractGold nanoparticles (AuNPs) are highlighted due to their low toxicity, compatibility with the human body, high surface area to volume ratio, and surfaces that can be easily modified with ligands. Biosynthesis of AuNPs using plant extract is considered a simple, low-cost, and eco-friendly approach. Brazilian Red Propolis (BRP), a product of bees, exhibits anti-inflammatory, anti-tumor, antioxidant, and antimicrobial activities. Here, we described the biosynthesis of AuNPs using BRP extract (AuNPextract) and its fractions (AuNPhexane, AuNPdichloromethane, AuNPethyl acetate) and evaluated their structural properties and their potential against microorganisms and cancer cells. AuNPs showed a surface plasmon resonance (SPR) band at 535 nm. The sizes and morphologies were influenced by the BRP sample used in the reaction. FTIR and TGA revealed the involvement of bioactive compounds from BRP extract or its fractions in the synthesis and stabilization of AuNPs. AuNPdichloromethane and AuNPhexane exhibited antimicrobial activities against all strains tested, showing their efficacy as antimicrobial agents to treat infectious diseases. AuNPs showed dose-dependent cytotoxic activity both in T24 and PC-3 cells. AuNPdichloromethane and AuNPextract exhibited the highest in vitro cytotoxic effect. Also, the cytotoxicity of biogenic nanoparticles was induced by mechanisms associated with apoptosis. The results highlight a potential low-cost green method using Brazilian red propolis to synthesize AuNPs, which demonstrated significant biological properties.

scholarly journals Tissue Engineering 3D Porous Scaffolds Prepared from Electrospun Recombinant Human Collagen (RHC) Polypeptides/Chitosan Nanofibers

2021 ◽  
Vol 11 (11) ◽  
pp. 5096
Author(s):  
Aipeng Deng ◽  
Yang Yang ◽  
Shimei Du
Keyword(s):  
Tissue Engineering ◽  
Three Dimensional ◽  
Great Promise ◽  
Porous Scaffolds ◽  
High Porosity ◽  
Engineering Applications ◽  
Nanofibrous Scaffolds ◽  
Human Collagen ◽  
Hierarchical Pore ◽  
Nih 3T3

Electrospinning, the only method that can continuously produce nanofibers, has been widely used to prepare nanofibers for tissue engineering applications. However, electrospinning is not suitable for preparing clinically relevant three-dimensional (3D) nanofibrous scaffolds with hierarchical pore structures. In this study, recombinant human collagen (RHC)/chitosan nanofibers prepared by electrospinning were combined with porous scaffolds produced by freeze drying to fabricate 3D nanofibrous scaffolds. These scaffolds exhibited high porosity (over 80%) and an interconnected porous structure (ranging from sub-micrometers to 200 μm) covered with nanofibers. As confirmed by the characterization results, these scaffolds showed good swelling ability, stability, and adequate mechanical strength, making it possible to use the 3D nanofibrous scaffolds in various tissue engineering applications. In addition, after seven days of cell culturing, NIH 3T3 was infiltrated into the scaffolds while maintaining its morphology and with superior proliferation and viability. These results indicated that the 3D nanofibrous scaffolds hold great promise for tissue engineering applications.

Sign in / Sign up

Export Citation Format

Share Document