Preparation and characterization of poly (amide-ester-imide)/Na+-MMT nanocomposite via ultrasonic method

2017 ◽  
Vol 37 (5) ◽  
pp. 443-448 ◽  
Author(s):  
Razieh Mirsafaei ◽  
Majid Kolahdoozan
Keyword(s):  
Electron Microscopy ◽  
Polymer Matrix ◽  
Ultrasonic Method ◽  
Polymer Nanocomposite ◽  
Interlayer Spacing ◽  
Water Soluble ◽  
Sem Images ◽  
Structure Information ◽  
Poly Ethylene ◽  
Clay Layers

Abstract The novel poly (amide-ester-imide) (PAEI)/Na+-MMT (montmorillonite) nanocomposites were synthesized by ultrasound-assisted technique successfully. PAEI/Na+-MMT nanocomposites with various content of Na+-MMT were applied to enhance the dispersion of the clay layers with polymer matrix. Water-soluble PAEI containing poly (ethylene glycol) (PEG-6000) was prepared, and nanocomposites with various content of Na+-MMT (5, 10, 15, and 20 mass %) were fabricated by ultrasonic method to produce nano-scale composites. The effects of Na+-MMT on the nanocomposites were investigated by Fourier transform infrared, X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) and for thermal properties. XRD approved the structure information of the synthesized nanomaterials, and it was shown that the interlayer spacing increased with clay loading. The magnitude of dispersion of the clay in the nanocomposite matrix was investigated by TEM and SEM images. The results indicated that the lateral dimension of Na+-MMT particles in composites was approximately 100 nm, and the nanomaterials are well dispersed in the polymer matrix to produce exfoliated structure in polymer/nanocomposite. Thermogravimetric analysis confirms that PAEI/Na+-MMT nanocomposites show superior thermal stability with respect to the pure PAEIs.

Preparation, characterization, and properties of polystyrene/Na-montmorillonite composites

2018 ◽  
Vol 32 (8) ◽  
pp. 1078-1091 ◽  
Author(s):  
Sibel Erol Dağ ◽  
Pınar Acar Bozkurt ◽  
Fatma Eroğlu ◽  
Meltem Çelik
Keyword(s):  
Electron Microscopy ◽  
Interlayer Spacing ◽  
Decomposition Temperature ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Specific Pore Volume ◽  
Transmission Electron ◽  
Thermal Stability Of

A series of polystyrene (PS)/unmodified Na-montmorillonite (Na-MMT) composites were prepared via in situ radical polymerization. The prepared composites were characterized using various techniques. The presence of various functional groups in the unmodified Na-MMT and PS/unmodified Na-MMT composite was confirmed by Fourier transform infrared spectroscopy. Morphology and particle size of prepared composites was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). According to the XRD and TEM results, the interlayer spacing of MMT layers was expanded. SEM images showed a spongy and porous-shaped morphology of composites. TEM revealed the Na-MMT intercalated in PS matrix. The thermal stability of PS/unmodified Na-MMT composites was significantly improved as compared to PS, which is confirmed using thermogravimetric analysis (TGA). The TGA curves indicated that the decomposition temperature of composites is higher at 24–51°C depending on the composition of the mixture than that of pure PS. The differential scanning calorimetry (DSC) results showed that the glass transition temperature of composites was higher as compared to PS. The moisture retention, water uptake, Brunauer–Emmett–Teller specific surface area, and specific pore volume of composites were also investigated. Water resistance of the composites can be greatly improved.

Self-healing and recyclable photonic elastomers based on a water soluble supramolecular polymer

2019 ◽  
Vol 3 (12) ◽  
pp. 2707-2715 ◽  
Author(s):  
Miaomiao Li ◽  
Binghua Zhou ◽  
Quanqian Lyu ◽  
Lizhen Jia ◽  
Haiying Tan ◽  
...  
Keyword(s):  
Ethylene Glycol ◽  
Polymer Matrix ◽  
Water Soluble ◽  
Supramolecular Polymer ◽  
Self Healing ◽  
Poly Ethylene Glycol ◽  
Structural Colors ◽  
Poly Ethylene

Photonic elastomers with angle-independent structural colors, self-healing, and recycling properties are prepared by incorporating isotropically arranged SiO2 nanoparticles into a water-soluble ureidopyrimidinone (UPy) cross-linked poly(ethylene glycol) (PEG) polymer matrix.

scholarly journals Polymer Blend Containing MoO3 Nanowires with Antibacterial Activity against Staphylococcus epidermidis ATCC 12228

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Urška Gradišar Centa ◽  
Petra Kocbek ◽  
Anna Belcarz ◽  
Srečo D. Škapin ◽  
Maja Remškar
Keyword(s):  
Antibacterial Activity ◽  
Staphylococcus Epidermidis ◽  
Vinylidene Fluoride ◽  
Protective Coatings ◽  
Polymer Nanocomposite ◽  
Water Soluble ◽  
Poly Vinylidene Fluoride ◽  
Poly Ethylene Oxide ◽  
Size And Morphology ◽  
Poly Ethylene

Antibacterial activity of a polymer nanocomposite containing water-soluble poly(ethylene oxide) (PEO), water insoluble poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), and MoO3 nanowires or MoO3 microparticles as antibacterial active substances is reported. The UV-vis absorption method was used for the illumination of dissolving of the MoO3 particles of different size and morphology in water. Dissolving of MoO3 nanowires (1 mg ml-1) decreases pH bellow 3.6 in only 3 min and below 3 in 15 min, while dissolving of the PEO/PVDF-HFP/MoO3 nanowires coating (5 mg ml-1) decreases pH bellow 3.6 in 90 min. These coatings completely destroy the Staphylococcus epidermidis ATCC 12228 bacterial strain within 3 h. The proposed applications are antibacterial protective coatings of contact surfaces.

scholarly journals Cationic Dye Removal Using Novel Magnetic/Activated Charcoal/β-Cyclodextrin/Alginate Polymer Nanocomposite

Nanomaterials ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 170 ◽  
Author(s):  
Sushma Yadav ◽  
Anupama Asthana ◽  
Rupa Chakraborty ◽  
Bhawana Jain ◽  
Ajaya Kumar Singh ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Activated Charcoal ◽  
Removal Rate ◽  
Polymer Nanocomposite ◽  
Water Soluble ◽  
Cationic Dye ◽  
Polymer Gel ◽  
X Ray ◽  
Equilibrium And Kinetics ◽  
Equilibrium Data

New magnetic iron oxide (Fe3O4)/activated charcoal (AC)/β-cyclodextrin (CD)/sodium alginate (Alg) polymer nanocomposite materials were prepared by direct mixing of the polymer matrix with the nanofillers. The obtained materials were utilized as nano-adsorbents for the elimination of methylene blue (MB), a hazardous water-soluble cationic dye, from aqueous solutions, and showed excellent regeneration capacity. The formation of the nanocomposites was followed by high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectrometry (EDX), Fourier-transform infrared spectroscopy (FTIR), vibrating sample magnetometer (VSM), X-ray diffraction (XRD) and adsorption of N2 at −196 °C. The rate of adsorption was investigated varying several factors, namely contact time, pH, amount of adsorbent and MB concentration on the adsorption process. Studies dealing with equilibrium and kinetics were carried out in batch conditions. The obtained results indicated that the removal rate of MB was 99.53% in 90 min. Langmuir’s isotherm fitted better to the equilibrium data of MB. Fe3O4/AC/CD/Alg polymer beads shows amazing adsorption capacities in the elimination of cationic dyes (2.079 mg/g for polymer gel beads and 10.63 mg g−1 for dry powder beads), in comparison to other adsorbent materials. The obtained adsorbent is spherical with hydrophobic cross-linked surface properties that enable an easy recovery without any significant weight loss of in the adsorbent used.

A Resorcinol-Formaldehyde Resin as an Embedding Material for Electron Microscopy of Membranes

1969 ◽  
Vol 27 ◽  
pp. 328-329 ◽  
Author(s):  
J. G. Robertson ◽  
D. F. Parsons
Keyword(s):  
Electron Microscopy ◽  
Osmium Tetroxide ◽  
Neutral Lipids ◽  
Lipid Extraction ◽  
Water Soluble ◽  
Formaldehyde Resin ◽  
Electron Microscope Autoradiography ◽  
Resorcinol Formaldehyde ◽  
Major Disadvantage ◽  
Cell Organization

The extraction of lipids from tissues during fixation and embedding for electron microscopy is widely recognized as a source of possible artifact, especially at the membrane level of cell organization. Lipid extraction is also a major disadvantage in electron microscope autoradiography of radioactive lipids, as in studies of the uptake of radioactive fatty acids by intestinal slices. Retention of lipids by fixation with osmium tetroxide is generally limited to glycolipids, phospholipids and highly unsaturated neutral lipids. Saturated neutral lipids and sterols tend to be easily extracted by organic dehydrating reagents prior to embedding. Retention of the more saturated lipids in embedded tissue might be achieved by developing new cross-linking reagents, by the use of highly water soluble embedding materials or by working at very low temperatures.

scholarly journals Antitumor Potential of Green Synthesized ZnONPs Using Root Extract of Withania somnifera against Human Breast Cancer Cell Line

Separations ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 8
Author(s):  
Kollur Shiva Prasad ◽  
Shashanka K Prasad ◽  
Ravindra Veerapur ◽  
Ghada Lamraoui ◽  
Ashwini Prasad ◽  
...  
Keyword(s):  
Breast Cancer ◽  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Cell Line ◽  
Withania Somnifera ◽  
Root Extract ◽  
Dependent Manner ◽  
Sem Images ◽  
Xrd Pattern ◽  
Transmission Electron

Herein we report the synthesis of zinc oxide nanoparticles (ZnONPs) using Withania somnifera root extract (WSE) as an effective chelating agent. The microscopic techniques viz., X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and selected area electron diffraction (SAED) were employed to analyze the as-obtained ZnONPs. The crystalline planes observed from the XRD pattern agrees with the hexagonal wurtzite structure of the as-prepared ZnONPs. The aggregations and agglomerations observed in the SEM images indicated that the size of the as-prepared ZnONPs was between 30 and 43 nm. The interplanar distance between the lattice fringes observed in the HRTEM image was found to be 0.253 nm, which is in good agreement with the (100) plane obtained in the XRD pattern. Furthermore, the anti-breast cancer cytotoxic evaluation was carried out using the MCF-7 cell line, and the results showed significant cytotoxic effects in a dose-dependent manner.

scholarly journals Microscopy Methods for Biofilm Imaging: Focus on SEM and VP-SEM Pros and Cons

Biology ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 51
Author(s):  
Michela Relucenti ◽  
Giuseppe Familiari ◽  
Orlando Donfrancesco ◽  
Maurizio Taurino ◽  
Xiaobo Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Ion Beam ◽  
Ruthenium Red ◽  
Variable Pressure ◽  
Sem Images ◽  
Advantages And Disadvantages ◽  
Pros And Cons ◽  
Microscopy Techniques ◽  
Scanning Electron

Several imaging methodologies have been used in biofilm studies, contributing to deepening the knowledge on their structure. This review illustrates the most widely used microscopy techniques in biofilm investigations, focusing on traditional and innovative scanning electron microscopy techniques such as scanning electron microscopy (SEM), variable pressure SEM (VP-SEM), environmental SEM (ESEM), and the more recent ambiental SEM (ASEM), ending with the cutting edge Cryo-SEM and focused ion beam SEM (FIB SEM), highlighting the pros and cons of several methods with particular emphasis on conventional SEM and VP-SEM. As each technique has its own advantages and disadvantages, the choice of the most appropriate method must be done carefully, based on the specific aim of the study. The evaluation of the drug effects on biofilm requires imaging methods that show the most detailed ultrastructural features of the biofilm. In this kind of research, the use of scanning electron microscopy with customized protocols such as osmium tetroxide (OsO4), ruthenium red (RR), tannic acid (TA) staining, and ionic liquid (IL) treatment is unrivalled for its image quality, magnification, resolution, minimal sample loss, and actual sample structure preservation. The combined use of innovative SEM protocols and 3-D image analysis software will allow for quantitative data from SEM images to be extracted; in this way, data from images of samples that have undergone different antibiofilm treatments can be compared.

scholarly journals Fast Dissolving Electrospun Nanofibers Fabricated from Jelly Fig Polysaccharide/Pullulan for Drug Delivery Applications

Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 241
Author(s):  
Thangavel Ponrasu ◽  
Bei-Hsin Chen ◽  
Tzung-Han Chou ◽  
Jia-Jiuan Wu ◽  
Yu-Shen Cheng
Keyword(s):  
Drug Delivery ◽  
Water Vapor Permeability ◽  
Electrospun Nanofibers ◽  
Average Diameter ◽  
Xrd Analysis ◽  
Water Soluble ◽  
Vapor Permeability ◽  
Uv Spectrum ◽  
Sem Images ◽  
Triton X

The fast-dissolving drug delivery systems (FDDDSs) are developed as nanofibers using food-grade water-soluble hydrophilic biopolymers that can disintegrate fast in the oral cavity and deliver drugs. Jelly fig polysaccharide (JFP) and pullulan were blended to prepare fast-dissolving nanofiber by electrospinning. The continuous and uniform nanofibers were produced from the solution of 1% (w/w) JFP, 12% (w/w) pullulan, and 1 wt% Triton X-305. The SEM images confirmed that the prepared nanofibers exhibited uniform morphology with an average diameter of 144 ± 19 nm. The inclusion of JFP in pullulan was confirmed by TGA and FTIR studies. XRD analysis revealed that the increased crystallinity of JFP/pullulan nanofiber was observed due to the formation of intermolecular hydrogen bonds. The tensile strength and water vapor permeability of the JFP/pullulan nanofiber membrane were also enhanced considerably compared to pullulan nanofiber. The JFP/pullulan nanofibers loaded with hydrophobic model drugs like ampicillin and dexamethasone were rapidly dissolved in water within 60 s and release the encapsulants dispersive into the surrounding. The antibacterial activity, fast disintegration properties of the JFP/pullulan nanofiber were also confirmed by the zone of inhibition and UV spectrum studies. Hence, JFP/pullulan nanofibers could be a promising carrier to encapsulate hydrophobic drugs for fast-dissolving/disintegrating delivery applications.

Effect of Cobalt Stearate and Vegetable Oil on Uv and Biodegradation of Linear Low-Density Poly(Ethylene)-Poly(Vinyl Alcohol) Blends

2011 ◽  
Vol 2 (4) ◽  
pp. 131-148 ◽  
Author(s):  
Francis Vidya ◽  
Subin S. Raghul ◽  
Sarita G Bhat ◽  
Eby Thomas Thachil
Keyword(s):  
Vegetable Oil ◽  
Vinyl Alcohol ◽  
Water Soluble ◽  
Poly Vinyl Alcohol ◽  
Low Density ◽  
Compression Moulding ◽  
Melt Mixing ◽  
Degradation Behaviour ◽  
Moulding Process ◽  
Poly Ethylene

The main objective of this study was to enhance the rate of UV and biodegradation of polyethylene by incorporating biodegradable materials and prooxidants. Prooxidants such as transition metal complexes are capable of initiating photooxidation and polymer chain cleavage, rendering the product more susceptible to biodegradation. In this work, the effect of (1) a metallic photoinitiator, cobalt stearate, and (2) different combinations of cobalt stearate and vegetable oil on the photooxidative degradation of linear low-density poly(ethylene)-poly(vinyl alcohol) (LLDPE/PVA) blend films has been investigated. For this, film-grade LLDPE was blended with different proportions of PVA. PVA is widely used in the industrial field, and recently it has attracted increasing attention as a water-soluble biodegradable polymer. Cobalt stearate and vegetable oil were added to the blends as prooxidants. The blends were prepared by melt mixing in a Thermo HAAKE Polylab system. Thin films containing these additives were prepared by a subsequent compression moulding process. The effect of UV exposure on LLDPE/PVA films in the presence as well as absence of these additives was investigated. Tensile properties, FTIR spectra, and scanning electron microscopy (SEM) were employed to investigate the degradation behaviour. It was found

Sign in / Sign up

Export Citation Format

Share Document