Measurement of Wood Wettability by the Wilhelmy Method. Part 2. Determination of Apparent Contact Angles

Holzforschung ◽  
2001 ◽  
Vol 55 (1) ◽  
pp. 33-41 ◽  
Author(s):  
M.E.P. Wålinder ◽  
G. Ström
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Contact Angles ◽  
Liquid Density ◽  
Initial Part ◽  
Test Cycle ◽  
Wetting Properties ◽  
Surface Energetics ◽  
Efficient Control

Summary This work focuses on the determination of apparent contact angles on wood by the Wilhelmy method. In this method, the force acting on an object is measured during a test cycle involving immersion in and withdrawal from a probe liquid. Fresh and aged veneers of extracted and non-extracted heart- and sapwood of pine were investigated. The results indicate that wicking of the probe liquids, into and along the porous wood veneers, occurs during the test cycles and that this strongly affects the determination of contact angles. It is suggested that two different wicking phenomena occur. First, when the veneer contacts the liquid, an instantaneous ‘initial wicking’ occurs. It is suggested that this initial wicking is influenced primarily by the liquid density and structural properties of the specimen (such as porosity and surface roughness), and not by surface energetics. An initial wicking constant was therefore estimated for the different veneer samples based on measurements in octane. Second, after the initial wicking, a continuing ‘secondary wicking’ is observed. In some cases, this may result in zero contact angle after a certain immersion depth. Contact angles should, therefore, be estimated from the initial part of the immersion, where the secondary wicking can be neglected. This may also reduce any contamination of the probe liquids by extractives. The Wilhelmy method seems to be a valuable tool for estimating the wetting properties of wood, permitting reproducible measurements of apparent contact angles provided that there is efficient control of wicking and contamination effects.

The Wetting of Insect Cuticles by Water

1955 ◽  
Vol 32 (3) ◽  
pp. 591-617 ◽  
Author(s):  
M. W. HOLDGATE
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Surface Properties ◽  
Surface Composition ◽  
Contact Angles ◽  
Aquatic Species ◽  
Water Contact ◽  
Calliphora Erythrocephala ◽  
Wetting Properties ◽  
Wide Range

1. The water contact angles of insects show a wide range of variation, which is broadly correlated with surface roughness and with habitat. 2. The contact angles of species inhabiting stored products or carrion are greatly modified by contamination. This produces large variations between apparently similar individuals. 3. In terrestrial insects surface roughness increases the contact angles to very large apparent values. Detailed analyses of its effect have been made in the pupa of Tenebrio molitor and the adult Calliphora erythrocephala. In some aquatic insects surface roughness leads to a reduction in the contact angles; this has been studied in the nymph of Anax imperator. 4. Prolonged immersion in water causes a lowering of the contact angles of all the insects examined, and the low angles of many aquatic species may therefore be the direct effect of their environment. In some aquatic species there is evidence of the active maintenance of a large contact angle during life. 5. Changes in contact angle accompany processes of cuticle secretion and will occur at any moult if changes in roughness or habitat take place. 6. The observed variations of surface properties can be explained without assuming any variation in the chemical composition of the cuticle surface. Wetting properties are of little value as indicators of cuticle surface composition. 7. The biological aspects of insect surface properties are briefly discussed.

scholarly journals Preparation of Superhydrophobic Teflon® AF 1600 Sub-Micron Fibers and Yarns Using the Forcespinningtm Technique

2013 ◽  
Vol 8 (4) ◽  
pp. 155892501300800 ◽  
Author(s):  
Yatinkumar Rane ◽  
Aleksey Altecor ◽  
Nelson S. Bell ◽  
Karen Lozano
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Average Diameter ◽  
Contact Angle Measurement ◽  
Contact Angles ◽  
Angle Measurement ◽  
Sem Analysis ◽  
Fiber Formation ◽  
Excellent Thermal Stability ◽  
Wetting Properties

Superhydrophobic materials combined with manufacturing processes that can increase surface roughness of the material, offer an opportunity to effectively control wetting properties. Rapid formation of Teflon® AF (TAF) fibrous mats with sub-micron fiber diameter using the Forcespinning™ technique is presented. The fiber formation technique is based on the use of centrifugal forces. SEM analysis shows uniform formation of TAF 1600 fibers with average diameter of 362±58nm. Contact angle measurement confirms the superhydrophobic nature of the mats with contact angles as high as 169° ± 3° and rolling angles of 2°. TAF 1600 mats were forcespun at a rate of 1gr/min. The relationship between the contact angle and hierarchical surface roughness of the TAF mat is also discussed. TAF yarns were also manufactured and characterized. Yarns with diameters of 156 microns withstood 17.5 MPa of engineering stress with a Young's modulus of 348 MPa in the elastic region and excellent thermal stability.

scholarly journals Surface, Volumetric, and Wetting Properties of Oleic, Linoleic, and Linolenic Acids with Regards to Application of Canola Oil in Diesel Engines

2019 ◽  
Vol 9 (17) ◽  
pp. 3445 ◽  
Author(s):  
Anna Zdziennicka ◽  
Katarzyna Szymczyk ◽  
Bronisław Jańczuk ◽  
Rafał Longwic ◽  
Przemysław Sander
Keyword(s):  
Surface Tension ◽  
Contact Angle ◽  
Diesel Engines ◽  
Canola Oil ◽  
Contact Angles ◽  
Physiochemical Properties ◽  
Engine Valve ◽  
Wetting Properties ◽  
Main Components ◽  
Adhesion Work

Oleic, linoleic, and linolenic acids are the main components of canola oil and their physiochemical properties decide on the use of canola oil as fuel for diesel engines. Therefore, the measurements of the surface tension of oleic, linoleic, and linolenic acids being the components of the canola oil, as well as their contact angles on the polytetrafluoroethylene (PTFE), poly(methyl methacrylate) (PMMA), and engine valve, were made. Additionally, the surface tension and contact angle on PTFE, PMMA, and the engine valve of the oleic acid and n-hexane mixtures were measured. On the basis of the obtained results, the components and parameters of oleic, linoleic, and linolenic acids’ surface tension were determined and compared to those of the canola oil. Next, applying the components and parameters of these acids, their adhesion work to PTFE, PMMA, and the engine valve was calculated by means of various methods.

scholarly journals Comments on “An Essay on Contact Angle Measurements”: Determination of Surface Roughness and Modeling of the Wetting Behavior

2011 ◽  
Vol 8 (11) ◽  
pp. 998-1002 ◽  
Author(s):  
Antonia Terriza ◽  
Rafael Alvarez ◽  
Francisco Yubero ◽  
Ana Borras ◽  
Agustin R. González-Elipe
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Wetting Behavior ◽  
Angle Measurements ◽  
Contact Angle Measurements

Surface characterization by optical contact angle measuring system

2019 ◽  
Vol 5 (2) ◽  
Author(s):  
Adrianna Nogalska ◽  
Anna Trojanowska ◽  
Bartosz Tylkowski ◽  
Ricard Garcia-Valls
Keyword(s):  
Contact Angle ◽  
Surface Characterization ◽  
Pressure Control ◽  
Measuring System ◽  
Optical Contact ◽  
Wetting Properties ◽  
Current State ◽  
Angle Measuring ◽  
Versatile Tool

Abstract Constant development of novel materials and their characterization is a highly important matter nowadays. Optical contact angle measuring system is a very versatile tool among the surface characterization techniques. The main application of the technique is determination of hydrophobicity/hydrophilicity and wetting properties of materials. Current generation machines are fully automatized with a number of complements for temperature and pressure control, nanoliter drop generation, etc. Besides commenting on the current state of the art of the equipment, their capabilities and costs, this review includes some practical tips on the execution of the technique and data analysis.

WETTING OF ROUGH SURFACES

2004 ◽  
Vol 11 (01) ◽  
pp. 7-13 ◽  
Author(s):  
XINPING ZHANG ◽  
SIRONG YU ◽  
ZHENMING HE ◽  
YAOXIN MIAO
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Sessile Drop ◽  
Test Sample ◽  
Contact Angles ◽  
Sessile Drop Method ◽  
Equilibrium Contact Angle ◽  
Roughness Surface ◽  
Solid Substrates ◽  
Effect Of Surface

This paper focuses on effects of roughness on wettability. According to Wenzel's equation, the transition of theoretical wetting contact angles is 90°, whereas many experimental results have indicated that such a transition takes place at contact angles smaller than 90°. A new model of wetting on roughness surface is established in this paper. The model indicates that the influencing factors of wetting on roughness surface include not only equilibrium contact angle θ0 and surface roughness, but also the system of liquids and solid substrates. There is a corresponding transition angle for every surface roughness, and the transition angle is lower than 90°. Surface roughness is propitious to improve the contact angle only when θ0 is lower than the transition angle. The effect of surface roughness on the contact angle increases with the increase of rE. To engineer the surface with different roughnesses, a Ti test sample is polished with sandpaper with abrasive number 350, 500, 1000 and 2000; the contact angles of water on Ti are measured by the sessile drop method. The results of the theoretical analysis agree with experimental ones.

scholarly journals Thermo-Responsive Wettability via Surface Roughness Change on Polymer-Coated Titanate Nanorod Brushes Toward Fast and Multi-Directional Droplet Transport

2020 ◽  
Author(s):  
Kenji Okada ◽  
Yoko Miura ◽  
Tomoya Chiya ◽  
Yasuaki Tokudome ◽  
Masahide Takahashi
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Contact Angles ◽  
Roughness Change ◽  
Scientific Advancement ◽  
Novel Approach ◽  
Droplet Transport ◽  
Titanate Nanostructures ◽  
Selection Of ◽  
Smart Surface

A novel approach for thermo-responsive wettability has been accomplished by surface roughness change induced by thermal expansion of paraffin coated on titanate nanostructures. The surface exhibits thermo-responsive and reversible wettability change in a hydrophobic regime; the surface shows superhydrophobicity with contact angles of ~157° below 50 °C and ~118° above 50 °C due to a decrease of surface roughness caused by thermally-expanded paraffin at higher temperatures. Reversible wettability change of ~40° of a contact angle allows for a fast and multi-directional droplet transport. The present approach affords versatile selection of materials and wide variety of the contact angle, promoting both scientific advancement and technology innovation in the field of smart surface.

Contact angles and hysteresis, with some reference to flotation research

1977 ◽  
Vol 30 (1) ◽  
pp. 205 ◽  
Author(s):  
IW Wark
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Gas Phase ◽  
Water Vapour ◽  
Relative Motion ◽  
Solid Surface ◽  
Contact Angles ◽  
Russian School ◽  
Angle Measurements ◽  
Contact Angle Measurements

A technique used in flotation research for contact angle measurements is recommended for wider use. The effect of one aspect of surface roughness on the relative motion of fluid/solid systems is discussed. The function of the water vapour present in the gas phase adjacent to the line of triple contact is examined. A claim of the Russian school of surface chemists is questioned, namely, that a discrete film of water on the solid surface invariably dominates both hysteresis and contact angle.

Lattice Boltzmann simulation of immiscible displacement in the cavity with different channel configurations

2017 ◽  
Vol 28 (11) ◽  
pp. 1750136 ◽  
Author(s):  
Qin Lou ◽  
Chenqiang Zang ◽  
Mo Yang ◽  
Hongtao Xu
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Lattice Boltzmann ◽  
Contact Angles ◽  
Surface Wettability ◽  
Immiscible Displacement ◽  
Displacement Efficiency ◽  
Small Contact Angle ◽  
Gas Cavity ◽  
Pseudo Potential

In this work, the immiscible displacement in a cavity with different channel configurations is studied using an improved pseudo-potential lattice Boltzmann equation (LBE) model. This model overcomes the drawback of the dependence of the fluid properties on the grid size, which exists in the original pseudo-potential LBE model. The approach is first validated by the Laplace law. Then, it is employed to study the immiscible displacement process. The influences of different factors, such as the surface wettability, the distance between the gas cavity and liquid cavity and the surface roughness of the channel are investigated. Numerical results show that the displacement efficiency increases and the displacement time decreases with the increase of the surface contact angle. On the other hand, the displacement efficiency increases with increasing distance between the gas cavity and the liquid cavity at first and finally reaches a constant value. As for the surface roughness, two structures (a semicircular cavity and a semicircular bulge) are studied. The comprehensive results show that although the displacement processes for both the structures depend on the surface wettability, they present quite different behaviors. Specially, for the roughness structure constituted by the semicircular cavity, the displacement efficiency decreases and displacement time increases evidently with the size of the semicircular cavity for the small contact angle. The trend slows down as the increase of the contact angle. Once the contact angle exceeds a certain value, the size of the semicircular cavity almost has no influence on the displacement process. While for the roughness structure of a semicircular bulge, the displacement efficiency increases with the size of bulge first and then it decreases for the small contact angle. The displacement efficiency increases first and finally reaches a constant for the large contact angle. The results also show that the displacement time has an extreme value in these cases for the small contact angles.

Sign in / Sign up

Export Citation Format

Share Document