Structure and Reactivity of Lignins and Associated Phenolic Acids in Wheat Straw TMP and CTMP Pulps

Holzforschung ◽  
2000 ◽  
Vol 54 (6) ◽  
pp. 637-640 ◽  
Author(s):  
E. Billa ◽  
C. de Choudens ◽  
B. Monties

Summary The effect of hydrogen peroxide bleaching on the structure of thermomechanical (TMP) and chemothermomechanical (CTMP) wheat straw paper pulps was investigated. The results obtained by thioacidolysis indicated that the TMP treatment did not significantly affect the ß-0-4 structures of lignins whereas, the alkali conditions of sulfonation (CTMP) and bleaching induced the cleavage of the ß-0-4 bonds and an increase in the S/G ratio. Moreover, it was concluded that bleaching and sulfonation are responsible for the partial solubilisation of the p-coumaric and ferulic acid esters. The ethers of p-coumaric acid are not significantly affected by these treatments whereas, the ethers of ferulic acid are degraded, as shown by acidolysis data. These results underline the structural differences of wheat straw pulps compared to wood pulps.

2011 ◽  
Vol 236-238 ◽  
pp. 1307-1312
Author(s):  
Chao Jun Wu ◽  
Chuan Shan Zhao ◽  
Jun Li ◽  
Ke FU Chen

In this paper, the effect of microwave treatment on the hydrogen peroxide bleaching of Soda-AQ wheat-straw pulp was investigated. The results showed that microwave treatment could increase the brightness of the hydrogen peroxide bleached pulp. The fiber coarseness of microwave enhancing peroxide bleached pulp was higher than that of the peroxide bleached pulp. However, the arithmetic average fiber length, the length weighted average fiber length and weight weighted average fiber length of the former was lower than that of the latter. Fourier transform infra-red spectroscopy (FTIR) and X-ray diffraction (XRD) spectra showed that CrI(%) crystallinity of microwave enhancing peroxide bleached pulp was similar as that of the peroxide bleached pulp but all higher than that of the Soda-AQ wheat-straw pulp. N·O′KI infra-red crystalline index of microwave enhancing peroxide bleached pulp were lower than that of the peroxide bleached pulp. The FTIR spectra of lignin showed that the microwave treatment had some influences on the methoxyl and phenolic group in lignin.


Holzforschung ◽  
2003 ◽  
Vol 57 (3) ◽  
pp. 282-288 ◽  
Author(s):  
G. X. Pan ◽  
C. I. Thomson ◽  
G. J. Leary

Summary The present paper reports our investigation into the use of two peroxygen reagents, peroxymonosulfate (PMS) and dimethyldioxirane (DMD), in bleaching sequences with peroxide to bleach wheat straw mechanical pulp, their reactivity with ferulic acid model compounds, and the likely relation between the two aspects. It was observed that combinations of PMS or DMD with peroxide offered a synergy leading to substantially improved brightness development in bleaching of wheat straw pulp. At the same time, these oxidizing reagents, especially DMD, were shown to be highly reactive with ferulic acid derivatives and increased the removal of ferulic acid from wheat straw pulp in bleaching. The results would suggest that the presence of non-lignin, peroxide-resistant chromophoric components, such as ferulic acid derivatives, might be an important factor limiting the brightness development of wheat straw mechanical pulp by conventional peroxide bleaching.


2016 ◽  
Vol 51 (4) ◽  
pp. 291-296
Author(s):  
N Das ◽  
SK Bose ◽  
D Biswas

Transition metal ions present in pulp, cause wasteful decomposition of hydrogen peroxide, a pulp brightener, and thus significantly affect the delignification selectivity of hydrogen peroxide bleaching. The metal ions also affect the brightness and optical properties of pulp. The free radicals generated during the decomposition degrade carbohydrates resulting in lower viscosity and yield. It is reported in the literature that magnesium sulfate successfully adsorbs transition metal ions and thus decrease their activity. This study dealt with the effect of Mg salts in hydrogen peroxide bleaching of jute caddies pulp. It was observed that prior bleaching treatments like chelation and acid washing of pulp were efficient in removing transition metal ions as indicated by lower consumption of hydrogen peroxide. However EDTA chelation seemed better compared to acid washing. The inclusion of Mg salts improved pulp brightness. The pulp viscosity was the highest with 0.3% Mg addition for both treated kraft and soda-AQ pulps. Considering both pulp viscosity and pulp brightness, it appeared that a 0.3% Mg dose on EDTA chelated pulp, was enough in hydrogen peroxide bleaching of pulps obtained from jute caddies. Bangladesh J. Sci. Ind. Res. 51(4), 291-296, 2016


1990 ◽  
Vol 70 (2) ◽  
pp. 495-499 ◽  
Author(s):  
TSUNEO KONDO ◽  
KAZUHIKO MIZUNO ◽  
TADASHI KATO

Cell wall-bound p-coumaric and ferulic acids were determined for stems of Italian ryegrass (Lolium multiflorum Lam.) sampled at different stages of growth. The greater part of the detected p-coumaric acid was linked to cell wall polymers through ester linkages. No definite relationship was found between the accumulation of p-coumaric acid esters and plant maturation. Some part of the detected ferulic acid was simultaneously esterified and etherified to cell wall polymers. Such ester- and ether-linked ferulic acid augmented with increasing maturity, suggesting that the number of ferulic acid cross-links in the cell wall matrices of ryegrass increases with plant maturation.Key words: p-coumaric acid, ferulic acid, Italian ryegrass, cell wall, phenolic acids


2013 ◽  
Vol 726-731 ◽  
pp. 548-551
Author(s):  
Li Jun Zhao ◽  
Mei Hong Niu ◽  
Jian Zhang ◽  
Yan Ning Sun ◽  
Na Li

Before oxygen bleaching and hydrogen peroxide bleaching, wheat straw pulp was bleached using xylanase. The effect of enzymatic stage on pulp properties and bleachability has been studied and compared with reference (control) pulps, processed without enzyme addition. Experimental results showed that, the optimal concentration of wheat straw pulp was 10%, the optimal treatment time and dose of enzyme was 60 min and 1.25AXU/g respectively. Oxygen pressure decreased from 0.6MPa to 0.5MPa when conditions of hydrogen peroxide bleachingremained unchanged and wheat straw pulp achieved the same whiteness. Hydrogen peroxide consumption decreased from 2% to 1.8% when oxygen bleaching has the same conditions and achieved the same white degree.


TAPPI Journal ◽  
2012 ◽  
Vol 11 (7) ◽  
pp. 37-46 ◽  
Author(s):  
PEDRO E.G. LOUREIRO ◽  
SANDRINE DUARTE ◽  
DMITRY V. EVTUGUIN ◽  
M. GRAÇA V.S. CARVALHO

This study puts particular emphasis on the role of copper ions in the performance of hydrogen peroxide bleaching (P-stage). Owing to their variable levels across the bleaching line due to washing filtrates, bleaching reagents, and equipment corrosion, these ions can play a major role in hydrogen peroxide decomposition and be detrimental to polysaccharide integrity. In this study, a Cu-contaminated D0(EOP)D1 prebleached pulp was subjected to an acidic washing (A-stage) or chelation (Q-stage) before the alkaline P-stage. The objective was to understand the isolated and combined role of copper ions in peroxide bleaching performance. By applying an experimental design, it was possible to identify the main effects of the pretreatment variables on the extent of metals removal and performance of the P-stage. The acid treatment was unsuccessful in terms of complete copper removal, magnesium preservation, and control of hydrogen peroxide consumption in the following P-stage. Increasing reaction temperature and time of the acidic A-stage improved the brightness stability of the D0(EOP)D1AP bleached pulp. The optimum conditions for chelation pretreatment to maximize the brightness gains obtained in the subsequent P-stage with the lowest peroxide consumption were 0.4% diethylenetriaminepentaacetic acid (DTPA), 80ºC, and 4.5 pH.


2019 ◽  
Vol 23 (17) ◽  
pp. 1857-1866
Author(s):  
Munawar Hussain ◽  
Zaheer Ahmed ◽  
Shamsun N. Khan ◽  
Syed A. A. Shah ◽  
Rizwana Razi ◽  
...  

Three new 5-deoxyflavonoid and dihydroflavonoids 2, 3 and 4 have been isolated from the methanolic extract of Abutioln pakistanicum aerial parts, for which structures were elucidated explicitly by extensive MS- and NMR-experiments. In addition to these, 3,7,4′-trihydroxy-3′-methoxy flavonol (1) is reported for the first time from Abutioln pakistanicum. Compound 2 and 4 are p-coumaric acid esters while compounds 2–4 exhibited α-glucosidase inhibitory activity. Docking studies indicated that the ability of flavonoids 2, 3 and 4 to form multiple hydrogen bonds with catalytically important residues is decisive hence is responsible for the inhibition activity. The docking results signified the observed in-vitro activity quite well which is in accordance with previously obtained conclusion that phenol moiety and hydroxyl group are critical for the inhibition of α-glucosidase enzyme.


2018 ◽  
Vol 15 (1) ◽  
pp. 11-20 ◽  
Author(s):  
Maria A. Morosanova ◽  
Anton S. Fedorov ◽  
Elena I. Morosanova

Background: The consumption of antioxidants, including phenolic compounds, is considered important for preventing the oxidative damage diseases and ageing. The total polyphenol content (TPC) is the parameter used to estimate the quality of plant-derived products. Methods: Phenol oxidase activity of green bean (Phaseolus vulgaris) crude extract (in the presence of hydrogen peroxide) and banana (Musa sp.) pulp crude extract has been studied spectrophotometrically using catechol, gallic acid, caffeic acid, ferulic acid, and quercetin as substrates. All studied compounds have been oxidized in the presence of green bean crude extract and hydrogen peroxide; all studied compounds except ferulic acid have been oxidized in the presence of banana pulp crude extract. Michaelis constants (Km) and maximum reaction rates (Vmax) have been determined for oxidation in the presence of green bean crude extract and hydrogen peroxide (Km are 3.8×10-4 M, 1.6×10-3 M, 2.2×10-4 M, 2.3×10-4 M, 1.4×10-4 M and Vmax are 0.046 min-1, 0.102 min-1, 0.185 min-1, 0.053 min-1, 0.041 min-1 for catechol, gallic acid, caffeic acid, ferulic acid, and quercetin, respectively) and for oxidation in the presence of banana pulp crude extract (Km are 1.6×10-3 M, 3.8×10-3 M, 2.2×10-3 M, 4.2×10-4 M and Vmax are 0.058 min-1, 0.025 min-1, 0.027 min-1, 0.015 min-1 for catechol, gallic acid, caffeic acid, and quercetin, respectively). The influence of 3-methyl-2-benzothiazolinone hydrazone (MBTH) on the oxidation reactions kinetics has been studied: Michaelis constants values decrease and maximum reaction rates increase, which contributes to the increase in sensitivity of the determination. Results: Kinetic procedures of Total Polyphenol Content (TPC) determination using crude plants extracts in the presence of MBTH have been proposed (time of analysis is 1 min). For gallic acid (used as a standard for TPC determination) detection limit is 5.3×10-5 M, quantitation limit is 1.8×10-4 M, and linear range is 1.8×10-4 - 1.3×10-3 M for green bean crude extract; detection limit is 2.9×10-5 M, quantitation limit is 9.5×10-5 M, and linear range is 9.5×10-5 - 2.4×10-3 M for banana pulp crude extract. Proposed procedures are characterized by higher interference thresholds for sulfites, ascorbic acid, and citric acid compared to pure enzymes (horseradish peroxidase and mushroom tyrosinase) in the same conditions. Compared with standard Folin-Ciocalteu (FC) method the procedures described in this work are also characterized by less interference and more rapid determination. Conclusion: The procedures have been applied to TPC determination in tea, coffee, and wine samples. The results agree with the FC method for tea and coffee samples and are lower for wine samples, probably, due to sulfites interference.


2012 ◽  
Vol 37 (5) ◽  
pp. 526-531 ◽  
Author(s):  
CRG Torres ◽  
CF Ribeiro ◽  
E Bresciani ◽  
AB Borges

SUMMARY The aim of the present study was to evaluate the effect of 20% and 35% hydrogen peroxide bleaching gels on the color, opacity, and fluorescence of composite resins. Seven composite resin brands were tested and 30 specimens, 3-mm in diameter and 2-mm thick, of each material were fabricated, for a total of 210 specimens. The specimens of each tested material were divided into three subgroups (n=10) according to the bleaching therapy tested: 20% hydrogen peroxide gel, 35% hydroxide peroxide gel, and the control group. The baseline color, opacity, and fluorescence were assessed by spectrophotometry. Four 30-minute bleaching gel applications, two hours in total, were performed. The control group did not receive bleaching treatment and was stored in deionized water. Final assessments were performed, and data were analyzed by two-way analysis of variance and Tukey tests (p<0.05). Color changes were significant for different tested bleaching therapies (p<0.0001), with the greatest color change observed for 35% hydrogen peroxide gel. No difference in opacity was detected for all analyzed parameters. Fluorescence changes were influenced by composite resin brand (p<0.0001) and bleaching therapy (p=0.0016) used. No significant differences in fluorescence between different bleaching gel concentrations were detected by Tukey test. The greatest fluorescence alteration was detected on the brand Z350. It was concluded that 35% hydrogen peroxide bleaching gel generated the greatest color change among all evaluated materials. No statistical opacity changes were detected for all tested variables, and significant fluorescence changes were dependent on the material and bleaching therapy, regardless of the gel concentration.


Sign in / Sign up

Export Citation Format

Share Document