scholarly journals Intermediate Layers in Tandem Organic Solar Cells

Green ◽  
2011 ◽  
Vol 1 (1) ◽  
Author(s):  
Yongbo Yuan ◽  
Jinsong Huang ◽  
Gang Li
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Organic Solar Cells ◽  
Organic Solar Cell ◽  
Bulk Heterojunction ◽  
Single Layer ◽  
Device Performance ◽  
Tandem Solar Cell ◽  
Solution Processed ◽  
Intermediate Layers

AbstractTandem structures can boost the efficiency of organic solar cell to more than 15%, compared to the 10% limit of single layer bulk heterojunction devices. Design and fabricating of intermediate layers plays a very important role to achieve high device performance. This article will review the main experimental progresses of tandem organic solar cells, and focus on the intermediate layers (charge recombination layers) in both thermal evaporated and solution processed organic tandem solar cell devices.

Stability of inverted organic solar cells with ZnO contact layers deposited from precursor solutions

2015 ◽  
Vol 8 (2) ◽  
pp. 592-601 ◽  
Author(s):  
Bradley A. MacLeod ◽  
Bertrand J. Tremolet de Villers ◽  
Philip Schulz ◽  
Paul F. Ndione ◽  
Hyungchul Kim ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Phosphonic Acid ◽  
Organic Solar Cells ◽  
Zinc Acetate ◽  
Organic Solar Cell ◽  
Solution Processed ◽  
Interstitial Zinc ◽  
Cell Stability

Interstitial zinc defects in solution-processed ZnO can be mitigated by using a diethylzinc precursor instead of zinc acetate, or by modifying the ZnO surface with a phosphonic acid, resulting in improved organic solar cell stability.

scholarly journals Conducting Polymers for Optoelectronic Devices and Organic Solar Cells: A Review

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2627 ◽  
Author(s):  
Ary R. Murad ◽  
Ahmed Iraqi ◽  
Shujahadeen B. Aziz ◽  
Sozan N. Abdullah ◽  
Mohamad A. Brza
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Conjugated Polymers ◽  
Molecular Orbital ◽  
Organic Solar Cells ◽  
Field Effect Transistors ◽  
Bulk Heterojunction ◽  
Polymer Solar Cells ◽  
Single Layer ◽  
Organic Polymer

In this review paper, we present a comprehensive summary of the different organic solar cell (OSC) families. Pure and doped conjugated polymers are described. The band structure, electronic properties, and charge separation process in conjugated polymers are briefly described. Various techniques for the preparation of conjugated polymers are presented in detail. The applications of conductive polymers for organic light emitting diodes (OLEDs), organic field effect transistors (OFETs), and organic photovoltaics (OPVs) are explained thoroughly. The architecture of organic polymer solar cells including single layer, bilayer planar heterojunction, and bulk heterojunction (BHJ) are described. Moreover, designing conjugated polymers for photovoltaic applications and optimizations of highest occupied molecular orbital (HOMO)–lowest unoccupied molecular orbital (LUMO) energy levels are discussed. Principles of bulk heterojunction polymer solar cells are addressed. Finally, strategies for band gap tuning and characteristics of solar cell are presented. In this article, several processing parameters such as the choice of solvent(s) for spin casting film, thermal and solvent annealing, solvent additive, and blend composition that affect the nano-morphology of the photoactive layer are reviewed.

Branched Thiophene Oligomer/Polymer Bulk Heterojunction Organic Solar Cell

2015 ◽  
Vol 1737 ◽  
Author(s):  
Francisco Martinez ◽  
Gloria Neculqueo ◽  
Sergio O. Vasquez ◽  
Helge Lemmetyinen ◽  
Alexander Efimov ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Organic Solar Cells ◽  
Organic Solar Cell ◽  
Bulk Heterojunction ◽  
Photovoltaic Cell ◽  
Organic Photovoltaic ◽  
Organic Photovoltaic Cell ◽  
Polymer Bulk ◽  
Branched Structures

ABSTRACTThiophene small novel branched structures have been proposed as candidates for dopant agents transporting holes-electron in organic solar cell (OSC). Low-band gap of these branched oligotiophene have been obtained to be used in organic solar cells. Two branched thiophene oligomers, a sexithienylene vinylene (E)-Bis-1,2-(5,5´´-Dimethyl-(2,2´:3´,2´´-terthiophene) vinylene, (BSTV) and octathienylene vinylene (BOTV) (E)-Bis-1,2-(5,5´´´-Dimethyl-(2,2´:5´,2´´:3´,2´´´-tetrathiophene) vinylene oligomers, have been synthesized and used as electron donor or dopant in a bulk heterojunction poly(3-hexylthiophene) (P3HT), /[6,6]-phenyl C61-butyric acid methylester (PCBM), Organic Photovoltaic cell.

Asymmetric triphenylamine–phenothiazine based small molecules with varying terminal acceptors for solution processed bulk-heterojunction organic solar cells

2018 ◽  
Vol 20 (9) ◽  
pp. 6390-6400 ◽  
Author(s):  
Srikanth Revoju ◽  
Subhayan Biswas ◽  
Bertil Eliasson ◽  
Ganesh D. Sharma
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Small Molecules ◽  
Organic Solar Cells ◽  
Bulk Heterojunction ◽  
Solution Processed ◽  
End Group

A change of electron-withdrawing end group in organic donor compounds in blends with PC71BM results in enhancement of solar cell PCE from 4.79 to 7.25%.

First solar cells based on CdTe nanoparticle/MEH-PPV composites

2004 ◽  
Vol 19 (7) ◽  
pp. 1990-1994 ◽  
Author(s):  
Sandeep Kumar ◽  
Thomas Nann
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Organic Solar Cells ◽  
Organic Solar Cell ◽  
Bulk Heterojunction ◽  
Low Cost ◽  
Phenylene Vinylene ◽  
Current Voltage Characteristic ◽  
Current Voltage ◽  
Cdte Nanocrystal

Hybrid bulk heterojunction composites are promising material for low-cost organic solar cells. Fundamental measurements with CdTe nanocrystal/MEH-PPV poly [2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene vinylene] composites and the first realization of a solar cell based on this material are presented. Optical and electrochemical properties are discussed as well as the current voltage characteristic of the resulting cell. It was found, that CdTe nanocrystal/MEH-PPV composites are well suited for an organic solar cell, even though the technological realization needs to be improved.

Boron-Nitrogen Doped Dihydroindeno[1,2-b]fluorene Derivatives as Acceptors in Organic Solar Cells

2019 ◽  
Author(s):  
Matthew Morgan ◽  
Maryam Nazari ◽  
Thomas Pickl ◽  
J. Mikko Rautiainen ◽  
Heikki M. Tuononen ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Organic Solar Cells ◽  
Organic Solar Cell ◽  
Broad Absorption ◽  
Nitrogen Doped ◽  
Large Depth ◽  
End Products ◽  
Boron Nitrogen ◽  
The Way

The electrophilic borylation of 2,5-diarylpyrazines results in the formation of boron-nitrogen doped dihydroindeno[1,2-<i>b</i>]fluorene which can be synthesized via mildly air-sensitive techniques and the end products handled readily under atmosphereic conditions. Through transmetallation via diarylzinc reagents a series of derivatives were sythesized which show broad absorption profiles that highlight the versatility of this backbone to be used in organic solar cell devices. These compounds can be synthesized in large yields, in alow number of steps and functionalized at many stages along the way providing a large depth of possibilities. Exploratory device paramaters were studied and show PCE of 2%.

Additive-induced Miscibility Regulation and Hierarchical Morphology Enables 17.5% Binary Organic Solar Cells

2021 ◽  
Author(s):  
Jie Lv ◽  
Hua Tang ◽  
Jiaming Huang ◽  
Cenqi Yan ◽  
Kuan Liu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Organic Solar Cells ◽  
Organic Solar Cell ◽  
Power Conversion ◽  
Charge Trapping ◽  
Free Charge ◽  
Charge Generation ◽  
Low Charge ◽  
Hierarchical Morphology

Due to the barrierless free charge generation, low charge trapping, and high charge mobilities, the PM6:Y6 organic solar cell (OSC) achieves excellent power conversion efficiency (PCE) of 15.7%. However, the...

scholarly journals Digital printing of a novel electrode for stable flexible organic solar cells with a power conversion efficiency of 8.5%

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
S. Wageh ◽  
Mahfoudh Raïssi ◽  
Thomas Berthelot ◽  
Matthieu Laurent ◽  
Didier Rousseau ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Organic Solar Cells ◽  
Power Conversion ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Solution Processed ◽  
Transparent Conducting

AbstractPoly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) mixed with single-wall nanotubes (SWNTs) (10:1) and doped with (0.1 M) perchloric acid (HClO4) in a solution-processed film, working as an excellent thin transparent conducting film (TCF) in organic solar cells, was investigated. This new electrode structure can be an outstanding substitute for conventional indium tin oxide (ITO) for applications in flexible solar cells due to the potential of attaining high transparency with enhanced conductivity, good flexibility, and good durability via a low-cost process over a large area. In addition, solution-processed vanadium oxide (VOx) doped with a small amount of PEDOT-PSS(PH1000) can be applied as a hole transport layer (HTL) for achieving high efficiency and stability. From these viewpoints, we investigate the benefit of using printed SWNTs-PEDOT-PSS doped with HClO4 as a transparent conducting electrode in a flexible organic solar cell. Additionally, we applied a VOx-PEDOT-PSS thin film as a hole transporting layer and a blend of PTB7 (polythieno[3,4-b] thiophene/benzodithiophene): PC71BM (phenyl-C71-butyric acid methyl ester) as an active layer in devices. Zinc oxide (ZnO) nanoparticles were applied as an electron transport layer and Ag was used as the top electrode. The proposed solar cell structure showed an enhancement in short-circuit current, power conversion efficiency, and stability relative to a conventional cell based on ITO. This result suggests a great carrier injection throughout the interfacial layer, high conductivity and transparency, as well as firm adherence for the new electrode.

Fabrication and characterization of CuPc and PCBM based organic solar cell with metal interlayer

2015 ◽  
Vol 12 (5) ◽  
pp. 413-420
Author(s):  
Muhammad Ahsan Naveed ◽  
A. Hussain ◽  
K. Islam ◽  
P. Akhter
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Impedance Spectroscopy ◽  
Organic Solar Cells ◽  
Organic Solar Cell ◽  
Silver Layer ◽  
Absorbance Spectrum ◽  
Heterojunction Solar Cells ◽  
Processing Cost ◽  
Donor Acceptor

Organic solar cells have potential as an alternative to conventional inorganic solar cell due to low processing cost, flexibility and easy fabrication technique. The goal of this paper is to study the characteristics of the CuPc and PCBM based organic solar cell by introducing a thin layer of Ag at the interface of donor (CuPc) and Acceptor (PCBM), their photovoltaic and optical properties were investigated. The heterojunction solar cells with and without silver inter layer were fabricated through thermal deposition in HR vacuum. The OPV solar cells were characterized using current-voltage graphs, absorbance spectrum and Impedance spectroscopy. Impedance spectroscopy was taken to identify the traps using series resistance, parallel resistance, and Impedance spectrums under different frequencies. Optical behaviors of these devices have been investigated with absorbance spectrum. Introducing Ag to interfacing point produced traps and these traps causes to decreased Voc, Isc, FF, and efficiency. The effect of silver layer at donor acceptor interface was studied.

Sign in / Sign up

Export Citation Format

Share Document