Seismic performance of reinforced concrete frame strengthened with an imperfect steel plate shear wall

2020 ◽  
Vol 10 (4) ◽  
pp. 380
Author(s):  
Mustafa Batikha ◽  
Yara Mouna
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
Steel Plate ◽  
Shear Wall ◽  
Reinforced Concrete Frame ◽  
Steel Plate Shear Wall ◽  
Concrete Frame

scholarly journals The effects of Steel Plate Shear Wall on Residual Capacity of Reinforced Concrete Frame under Sequence Earthquakes by Incremental Dynamic Analysis

2021 ◽  
Author(s):  
Hamze Rouhi ◽  
Majid Gholhaki
Keyword(s):  
Reinforced Concrete ◽  
Dynamic Analysis ◽  
Steel Plate ◽  
Shear Wall ◽  
Seismic Sequence ◽  
Reinforced Concrete Frame ◽  
Steel Plate Shear Wall ◽  
Concrete Frame ◽  
Tall Structures ◽  
Residual Capacity

Abstract The residual capacity of a damaged structure after the main earthquake is equal to the smallest spectral acceleration of the first mode, which causes local or general failure during the aftershock. In this research, the effect of steel plate shear wall on residual capacity of the reinforced concrete frame under seismic sequence has been investigated. Based on this, four systems of 4, 8, 12, and 24 stories, which represent short, intermediate, tall, are modeled in finite element software and subject to three sets of single and real seismic sequence, taking into account the damage, the effects of mainshock earthquakes have been analyzed under aftershock earthquakes nonlinear increment dynamic analysis (IDA). The analysis showed that in the real seismic sequence, the residual capacity of a reinforced concrete frame with steel plate shear wall in short and intermediate structures on average 3.6 times and tall structures up to 4.25 times compared to the residual capacity of the reinforced concrete frame without steel plate shear wall. Also, in the real seismic sequence, the residual capacity of the structure decreased with increasing the height of short to intermediate structures and intermediate to tall structures, so that this capacity reduction decreased by an average of 70% in reinforced concrete frame with and without steel plate shear wall.

Investigation of Failure Mechanism of Thin Steel Plate Shear Wall in RC Frame

2019 ◽  
Vol 803 ◽  
pp. 314-321 ◽  
Author(s):  
Maryam Bypour ◽  
Benyamin Kioumarsi ◽  
Mahdi Kioumarsi
Keyword(s):  
Steel Plate ◽  
Shear Wall ◽  
Load Carrying Capacity ◽  
Reinforced Concrete Frame ◽  
Steel Plate Shear Wall ◽  
Concrete Frame ◽  
The Third ◽  
Load Carrying ◽  
Thin Steel ◽  
Thin Steel Plate

In this paper, the behavior of steel plate shear wall (SPSW) in the reinforced concrete frame (RCF) has been studied numerically. Three different connections have been proposed to connect SPSW to RCF. In the first connection, fish plates, while in the second one, combination of fish plates and studs transfer forces between SPSW and RCF. In the third connection, there is no direct connection between the infill plate and RCF, and additional steel frame has been used for connecting of the infill plate. The results demonstrate that, load carrying capacity increases in all the specimens comparing the reference RCF. Investigating the formation sequence of plastic hinges in different specimens demonstrates that there is different sequence in the specimens with different connections.

Seismic Performance Evaluation for Steel Reinforced Concrete Frame Structures

2011 ◽  
Vol 255-260 ◽  
pp. 2421-2425
Author(s):  
Qiu Wei Wang ◽  
Qing Xuan Shi ◽  
Liu Jiu Tang
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
Frame Structure ◽  
Reinforced Concrete Frame ◽  
Seismic Performance Evaluation ◽  
Steel Reinforced Concrete ◽  
Concrete Frame ◽  
Structural Capacity ◽  
Reinforced Concrete Frame Structures ◽  
Dynamic Nonlinear Analysis

The randomness and uncertainty of seismic demand and structural capacity are considered in demand-capacity factor method (DCFM) which could give confidence level of different performance objectives. Evaluation steps of investigating seismic performance of steel reinforced concrete structures with DCFM are put forward, and factors in calculation formula are modified based on stress characteristics of SRC structures. A regular steel reinforced concrete frame structure is analyzed and the reliability level satisfying four seismic fortification targets are calculated. The evaluation results of static and dynamic nonlinear analysis are compared which indicates that the SRC frame has better seismic performance and incremental dynamic analysis could reflect more dynamic characteristics of structures than pushover method.

Seismic performance of ductile medium height reinforced concrete frame buildings designed in accordance with the provisions of the 1995 National Building Code of Canada

1999 ◽  
Vol 26 (5) ◽  
pp. 606-617 ◽  
Author(s):  
A C Heidebrecht ◽  
N Naumoski
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
Frame Structure ◽  
Performance Criteria ◽  
Building Code ◽  
Reinforced Concrete Frame ◽  
Concrete Frame ◽  
Moment Resisting Frame ◽  
Moment Resisting ◽  
Interstorey Drift

This paper describes an investigation into the seismic performance of a six-storey ductile moment-resisting frame structure located in Vancouver and designed and detailed in accordance with the seismic provisions of the National Building Code of Canada (1995). Both pushover and dynamic analyses are conducted using an inelastic model of the structure as designed and detailed. The structural performance of a number of design variations is evaluated using interstorey drift and member curvature ductility response as performance measures. All frames studied are expected to perform at an operational level when subjected to design level seismic excitations and to meet life safe performance criteria at excitations of twice the design level.Key words: seismic, building, frames, ductile, design, performance, reinforced concrete, code.

Sign in / Sign up

Export Citation Format

Share Document