Design of Concrete Mixtures with Recycled Concrete Aggregates

2013 ◽  
Vol 110 (5) ◽  
Keyword(s):  
Recycled Concrete ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates ◽  
Concrete Mixtures

scholarly journals Investigation of the Use of Recycled Concrete Aggregates Originating from a Single Ready-Mix Concrete Plant

2018 ◽  
Vol 8 (11) ◽  
pp. 2149 ◽  
Author(s):  
Eleftherios Anastasiou ◽  
Michail Papachristoforou ◽  
Dimitrios Anesiadis ◽  
Konstantinos Zafeiridis ◽  
Eirini-Chrysanthi Tsardaka
Keyword(s):  
Soil Stabilization ◽  
Coarse Fraction ◽  
Recycled Concrete ◽  
Recycled Aggregates ◽  
Hardened Concrete ◽  
Fine Aggregate ◽  
Waste Products ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates ◽  
Concrete Mixtures

The waste produced from ready-mixed concrete (RMC) industries poses an environmental challenge regarding recycling. Three different waste products form RMC plants were investigated for use as recycled aggregates in construction applications. Crushed hardened concrete from test specimens of at least 40 MPa compressive strength (HR) and crushed hardened concrete from returned concrete (CR) were tested for their suitability as concrete aggregates and then used as fine and coarse aggregate in new concrete mixtures. In addition, cement sludge fines (CSF) originating from the washing of concrete trucks were tested for their properties as filler for construction applications. Then, CSF was used at 10% and 20% replacement rates as a cement replacement for mortar production and as an additive for soil stabilization. The results show that, although there is some reduction in the properties of the resulting concrete, both HR and CR can be considered good-quality recycled aggregates, especially when the coarse fraction is used. Furthermore, HR performs considerably better than CR both as coarse and as fine aggregate. CSF seems to be a fine material with good properties as a filler, provided that it is properly crushed and sieved through a 75 μm sieve.

Durability of Pavement Concretes Made with Recycled Concrete Aggregates

2012 ◽  
Vol 2290 (1) ◽  
pp. 44-51 ◽  
Author(s):  
Jitendra Jain ◽  
Kho Pin Verian ◽  
Jan Olek ◽  
Nancy Whiting
Keyword(s):  
Base Material ◽  
Concrete Pavement ◽  
Recycled Concrete ◽  
Electrical Impedance Spectroscopy ◽  
Concrete Pavements ◽  
Chloride Permeability ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates ◽  
Air Content ◽  
Concrete Mixtures

There is a growing trend to replace the traditional ingredients of concrete pavement mixtures with more sustainable materials from a perspective of both the cost of raw materials and the carbon dioxide footprint. The availability of quality natural aggregates, which make up about 70% to 80% of concrete (by volume), is becoming more limited because of environmental restrictions on quarrying operations and longer hauling distances. The other major concern is disposal of old concrete pavements, which unless used as fill or base material for construction of new roadways, will have to be placed in the landfills. In this study, recycled concrete aggregates (RCA) obtained from crushing old concrete pavement were used as coarse aggregates at 0%, 30%, 50%, and 100% replacement levels (by mass) for natural virgin aggregates (NVA). Concrete mixtures were designed and produced to meet the concrete pavement requirements for air content, slump, and flexural strength stipulated by the Indiana Department of Transportation. All concrete mixtures were produced with 18.5% to 20.0% of the cement replaced (by mass) with ASTM C618 Class C fly ash. The physical and mechanical testing involved evaluation of slump, air content, and development of both flexural and compressive strengths. In addition, durability was assessed with the freeze–thaw test, scaling test, rapid chloride permeability (RCP) test, and non–steady state migration test. The most advantageous dosages for replacing NVA with RCA for concrete pavements were found to be 50%, on the basis of fresh concrete properties and the results of strength and durability tests. The applicability of electrical impedance spectroscopy for quick performance appraisal is presented on the basis of the experimental relationship between the RCP charge and bulk resistance of concrete.

Durable Performance of Recycled Concrete Using Coarse and Fine Recycled Concrete Aggregates in Air Environment

2011 ◽  
Vol 261-263 ◽  
pp. 446-449 ◽  
Author(s):  
Ping Hua Zhu ◽  
Xin Jie Wang ◽  
Jin Cai Feng
Keyword(s):  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Structural Concrete ◽  
Aggregate Concrete ◽  
Cube Strength ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates ◽  
Natural Aggregate ◽  
Concrete Mixtures

The influence of synchronous use of coarse and fine recycled concrete aggregates on durable performance of recycled aggregate concrete (RAC) in air environment were determined. In this study, three series of concrete mixtures were prepared, in which the coarse recycled aggregate was used as 0%, 30%, 60% and 90% replacements of coarse natural aggregate and fine recycled aggregate as 0%, 10%, 20%, and 30% replacements of fine natural aggregate. Meanwhile, fly ash and slag were used as 15%, 25%, 35% and 45% replacements of cement, respectively. The carbonation depths, compressive cube strength, workability of RACs were tested. The experimental results showed that RAC with synchronous use of coarse and fine recycled concrete aggregates had satisfactory durable performance. When RAC was used as structural concrete in air environment, the optimum synchronous replacements are 60% for coarse recycled aggregate and 20% for fine recycled aggregate.

Quality Evaluation System for Description of Recycled Concrete Aggregates and Verification of its Functionality

2017 ◽  
Vol 902 ◽  
pp. 14-19 ◽  
Author(s):  
Iveta Nováková ◽  
Iveta Hájková
Keyword(s):  
Evaluation System ◽  
Quality Evaluation ◽  
Recycled Concrete ◽  
Demolition Waste ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates ◽  
Concrete Mixtures ◽  
Natural Aggregates ◽  
Set Up ◽  
Quality Evaluation System

Article presents quality evaluation system for description of recycled concrete aggregates (RCA), verification of RCA properties and subsequent application in to concrete mixtures as a partial or total replacement of natural aggregates (NA). Modernization and rehabilitation of constructions is accompanied by creation of demolition waste from old buildings and structures. The necessity of recycling is unavoidable, because volume of construction and demolition waste (C&DW) is increasing and the landfills are reaching their maximum capacity. Nowadays, there are numerous research teams focused on analysis of characteristics and application of RCA into new concrete as a replacement of NA. Test samples of RCA have always different source, grain composition and other physical and mechanical properties, which are variously described in each different paper. Up to now, there is no any uniform quality evaluation system for description of recycled concrete aggregates, which can easily describe their source and assumed properties. Our aim is to set up rules for description of RCA and simplify the evaluation of properties of various RCA. Qualification system will be applied on three different samples of RCA and verified by the selected properties tests. Tested samples of RCA will be than used as a replacement of natural aggregates in concrete mixtures. The replacement amount was set up on 20%, 40% and 100% according to the reviewed literature, to have a comparable replacement amount and valuable results for discussion. The results of RCA testing and testing of concrete with partial and total replacement of NA showed that the evaluation system is working properly. It can be concluded, that accuracy of the quality evaluation system for description of recycled concrete aggregates is sufficient, but more tests on RCA should be done to prove all connections in between description of RCA and their properties.

Recycled Aggregate Concretes for Structural Applications: From Investigation to Design

2012 ◽  
Vol 548 ◽  
pp. 209-214
Author(s):  
Valeria Corinaldesi ◽  
Giacomo Moriconi
Keyword(s):  
Elastic Modulus ◽  
Drying Shrinkage ◽  
Structure Design ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates ◽  
Concrete Mixtures ◽  
Structural Applications

In this paper an investigation of mechanical behaviour and, in particular, elastic properties of recycled aggregate concrete (RAC) is presented. RACs were prepared by using a coarse aggregate made of old concrete particles coming from a recycling plant in which rubble from demolition of reinforced concrete structures is collected and suitably treated. Several concrete mixtures were prepared by using either the only virgin aggregates (as reference) or 30% recycled concrete aggregates replacing gravel, and by using two different kinds of cement. Different water to cement ratios were adopted ranging from 0.40 to 0.60, while concrete workability was always maintained at the same rate by adding different amounts of water-reducing admixture. Concrete compressive strength, elastic modulus and drying shrinkage were evaluated. Results obtained showed that structural concrete up to C32/40 strength class can be manufactured with RAC. Moreover, results obtained were discussed in order to obtain useful information for RAC structure design, particularly in terms of elastic modulus and drying shrinkage prediction.

Green Concrete made with Recycled Concrete Aggregates: Fresh and Hardened Properties

2018 ◽  
Author(s):  
Driton R. Kryeziu ◽  
Armend Muja ◽  
Fisnik Kadiu ◽  
Visar Krelani ◽  
Besian Sinani ◽  
...  
Keyword(s):  
Recycled Concrete ◽  
Green Concrete ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates ◽  
Hardened Properties
Sign in / Sign up

Export Citation Format

Share Document