scholarly journals DESIGN OF TUNED MASS DAMPERS FOR LARGE STRUCTURES USING MODAL ANALYSIS

2020 ◽  
Vol 26 ◽  
pp. 100-106
Author(s):  
Jan Štepánek ◽  
Jiří Máca
Keyword(s):  
Numerical Optimization ◽  
Design Method ◽  
Optimization Method ◽  
Tuned Mass Damper ◽  
Superposition Method ◽  
Tuned Mass Dampers ◽  
Design And Optimization ◽  
Large Structures ◽  
Mode Superposition Method ◽  
Mass Damper

Tuned mass damper is a device, which can be highly useful when dealing with excessive vibration and is widely used in many engineering fields. However, its proper design and optimization is a complicated task. This study uses mode superposition method to speed up the evaluation of dynamic response. The speed of response calculation allows for a quick calculation of frequency response function and numerical optimization of tuned mass dampers. This optimization method is demonstrated on a numerical example of a cable stayed footbridge. The example compares a simplified and widely used design method of tuned mass damper with numerical optimization.

Analytical analysis for the design of nonlinear tuned mass damper

2020 ◽  
Vol 26 (9-10) ◽  
pp. 646-658
Author(s):  
Lu-yu Li ◽  
Tianjiao Zhang
Keyword(s):  
Passive Control ◽  
Design Method ◽  
Tuned Mass Damper ◽  
Control Device ◽  
Control Performance ◽  
Tuned Mass Dampers ◽  
Mass Damper ◽  
Practical Engineering ◽  
Optimum Formula ◽  
Nonlinear Tuned Mass Damper

A tuned mass damper is a passive control device that has been widely used in aerospace, mechanical, and civil engineering as well as many other fields. Tuned mass dampers have been studied and improved over the course of many years. In practical engineering applications, a tuned mass damper inevitably produces some nonlinear characteristics due to the large displacement and the use of the limiting devices, but this nonlinearity is often neglected. The simulation results in this study confirm that neglecting the nonlinearity in the design process can produce adverse effects on the control performance. This paper takes into account the nonlinearity of the tuned mass damper produced in the process of vibration and deduces an optimum formula for the frequency of a tuned mass damper by the complexification averaging method and multiscale method. Based on this formula, a modified design method for the frequency of a tuned mass damper is presented. The numerical results show that the nonlinear tuned mass damper after modification is better than a linear tuned mass damper in terms of control performance.

An Optimization Method of Multiple Tuned Mass Damper Systems and Application to Bridge With Moving Car

2016 ◽  
Author(s):  
Thuan Nguyen ◽  
Nanako Miura ◽  
Akira Sone
Keyword(s):  
Control System ◽  
Optimal Design ◽  
Vibration Control ◽  
Design Theory ◽  
Seismic Loading ◽  
Optimization Method ◽  
Tuned Mass Damper ◽  
Tuned Mass Dampers ◽  
High Rise ◽  
Mass Damper

Tuned mass damper (TMD) device has been a popular vibration control system for moderns as high-rise building, bridge to suppress excessive vibration due to environment or human loading. Moreover, multiple tuned mass dampers have received much attention in the researched. An optimal design theory for bridge implemented with multiple TMD devices is proposed in this paper. The proposed method chooses the objective function with the constraints on the peaks which are at the same heights over frequency ranges of interest. This proposed method successfully reduces vibration of bridge traveled by a car. In a future study, we will extend the optimal design theory for the cases with more than one car and the bridge under seismic loading.

A new approach to inertial damper design to control base displacement in isolated buildings

2021 ◽  
pp. 107754632110359
Author(s):  
César A Morales
Keyword(s):  
Vibration Isolation ◽  
Design Procedure ◽  
Optimization Method ◽  
Tuned Mass Damper ◽  
Tuned Mass Dampers ◽  
Seismic Displacement ◽  
Displacement Problem ◽  
Mass Damper ◽  
Damper Design ◽  
Base Displacement

A novel design procedure for tuned mass dampers in isolated structures is presented. The proposed optimization method is specifically developed to control base displacements or to solve the large isolator displacement problem in this type of structures under earthquakes. Therefore, it is based on a displacement transmissibility function, T, a particular case of the general transmissibility concept, which comes from Vibration Isolation. Three contributions are application of new seismic displacement narrowbandness, simpler relative transmissibility function, and compound design of isolation plus tuned mass damper. A standard isolated model is used to show that the base displacement can be controlled at levels in the proximity of the ground motion ( T ≈ 1), which results in a positive comparison with previous isolation and tuned mass damper solutions; this is one of the main conclusions and it is based on novelty three above; in fact, other solutions in the literature compare their attained displacements with respect to the structure without tuned mass damper. Comparison with isolated results is not, therefore, possible herein, but it is not desirable either; actually, what is possible is a positive and more demanding comparison, which is with respect to the very seismic ground displacement itself. The large isolator displacement problem can be solved or attenuated by properly designing a tuned mass damper subsystem jointly with the isolation one.

Effectiveness of Location and Number of Multiple Tuned Mass Damper for Seismic Structures

2020 ◽  
Vol 9 (6) ◽  
pp. 780-783
Keyword(s):  
Seismic Response ◽  
Software Tool ◽  
Tuned Mass Damper ◽  
Structure Study ◽  
Structural Performance ◽  
Mass Ratio ◽  
Tuned Mass Dampers ◽  
Maximum Reduction ◽  
Mass Damper ◽  
Earthquake Data

Tuned mass dampers (TMD) are one of the most reliable devices to control the vibration of the structure. The optimum mass ratio required for a single tuned mass damper (STMD) is evaluated corresponding to the fundamental natural frequency of the structure. The effect of STMD and Multiple tuned mass dampers (MTMD) on a G+20 storey structure are studied to demonstrate the damper’s effectiveness in seismic application. The location and number of tuned mass dampers are studied to give best structural performance in maximum reduction of seismic response for El Centro earthquake data. The analysis results from SAP 2000 software tool shows damper weighing 2.5% of the total weight of the structure effectively reduce the response of the structure. Study shows that introduction of 4-MTMD at top storey can effectively reduce the response by 10% more in comparison to single tuned mass damper. The use of MTMD of same mass ratio that of STMD is more effective in seismic response.

Adaptive multiple tuned mass dampers based on modal parameters for earthquake response reduction in multi-story buildings

2016 ◽  
Vol 20 (9) ◽  
pp. 1375-1389 ◽  
Author(s):  
Mohammad Sabbir Rahman ◽  
Md Kamrul Hassan ◽  
Seongkyu Chang ◽  
Dookie Kim
Keyword(s):  
Tuned Mass Damper ◽  
Primary Objective ◽  
Modal Parameters ◽  
Earthquake Response ◽  
Tuned Mass Dampers ◽  
Mass Damper ◽  
Modal Mass ◽  
Story Building ◽  
Selection Of ◽  
Multiple Tuned Mass Dampers

The primary objective of this research is to find the effectiveness of an adaptive multiple tuned mass damper distributed along with the story height to control the seismic response of the structure. The seismic performance of a 10-story building was investigated, which proved the efficiency of the adaptive multiple tuned mass damper. Structures with single tuned mass damper and multiple tuned mass dampers were also modeled considering the location of the dampers at the top of the structure, whereas adaptive multiple tuned mass damper of the structure was modeled based on the story height. Selection of the location of the adaptive multiple tuned mass damper along with the story height was dominated by the modal parameters. Participation of modal mass directly controlled the number of the modes to be considered. To set the stage, a comparative study on the displacements and modal energies of the structures under the El-Centro, California, and North-Ridge earthquakes was conducted with and without various types of tuned mass dampers. The result shows a significant capability of the proposed adaptive multiple tuned mass damper as an alternative tool to reduce the earthquake responses of multi-story buildings.

Parameter Design of Conformal PML Based on 2D Monostatic RCS Optimization

2021 ◽  
Vol 36 (6) ◽  
pp. 726-733
Author(s):  
Yongjie Zhang ◽  
Xiaofeng Deng
Keyword(s):  
Electromagnetic Scattering ◽  
Simulated Annealing Algorithm ◽  
Design Method ◽  
Optimization Method ◽  
Parameter Design ◽  
Design Parameters ◽  
Absorption Effect ◽  
Absorbing Boundary ◽  
Design And Optimization ◽  
Annealing Algorithm

In this study, 2D finite element (FE) solving process with the conformal perfectly matched layer (PML) is elucidated to perform the electromagnetic scattering computation. With the 2D monostatic RCS as the optimization objective, a sensitivity analysis of the basic design parameters of conformal PML (e.g., layer thickness, loss factor, extension order and layer number) is conducted to identify the major parameters of conformal PML that exerts more significant influence on 2D RCS. Lastly, the major design parameters of conformal PML are optimized by the simulated annealing algorithm (SA). As revealed from the numerical examples, the parameter design and optimization method of conformal PML based on SA is capable of enhancing the absorption effect exerted by the conformal PML and decreasing the error of the RCS calculation. It is anticipated that the parameter design method of conformal PML based on RCS optimization can be applied to the cognate absorbing boundary and 3D electromagnetic computation.

Back-iron design-based electromagnetic regenerative tuned mass damper

2020 ◽  
Vol 234 (3) ◽  
pp. 607-622
Author(s):  
Semen Kopylov ◽  
Zhaobo Chen ◽  
Mohamed AA Abdelkareem
Keyword(s):  
Root Mean Square ◽  
Tuned Mass Damper ◽  
Harmonic Excitation ◽  
Experimental Results ◽  
Mean Square ◽  
Tuned Mass Dampers ◽  
Practical Applications ◽  
Mass Damper ◽  
Compact Dimension ◽  
Regenerative Power

Implementation of tuned mass dampers is the commonly used approach to avoid excessive vibrations in civil engineering. However, due to the absence of the compact dimension, there are still no practical applications of the tuned mass dampers in automotive industry. Meanwhile, recent investigations showed the benefit of utilizing a tuned mass damper in a vehicle suspension in terms of driving comfort and road holding. Thus, the current investigation aimed to explore a novel compact dimension tuned mass damper, which can provide both sufficient vibration mitigation and energy harvesting. This paper presents a prototype of a back-iron-based design of an electromagnetic regenerative tuned mass damper. The mathematical model of the tuned mass damper system was developed and has been validated by the experimental results of the tuned mass damper prototype implemented in a protected mass test-bench. The indicated results concluded that the attenuation performance dramatically deteriorated under random excitations and a reduction in the root-mean-square acceleration of 18% is concluded compared to the case with undamped tuned mass damper. Under harmonic excitations, the designed tuned mass damper prototype is able to reduce the peak acceleration value of the protected structure by 79%. According to the experimental results, the designed tuned mass damper prototype revealed a peak regenerative power of 0.76 W under a harmonic excitation of 8.1 Hz frequency [Formula: see text]m amplitude. Given the simulated random road profiles from C to E, the back-iron electromagnetic tuned mass damper indicated that root-mean-square harvested power from 0.6 to 6.4 W, respectively.

Sign in / Sign up

Export Citation Format

Share Document