scholarly journals Use of inerter devices for weight reduction of tuned mass-dampers for seismic protection of multi-story building: the Tuned Mass-Damper-Interter (TMDI)

2016 ◽  
Author(s):  
Agathoklis Giaralis ◽  
Laurentiu Marian
Keyword(s):  
Weight Reduction ◽  
Tuned Mass Damper ◽  
Seismic Protection ◽  
Tuned Mass Dampers ◽  
Mass Damper ◽  
Story Building

Adaptive multiple tuned mass dampers based on modal parameters for earthquake response reduction in multi-story buildings

2016 ◽  
Vol 20 (9) ◽  
pp. 1375-1389 ◽  
Author(s):  
Mohammad Sabbir Rahman ◽  
Md Kamrul Hassan ◽  
Seongkyu Chang ◽  
Dookie Kim
Keyword(s):  
Tuned Mass Damper ◽  
Primary Objective ◽  
Modal Parameters ◽  
Earthquake Response ◽  
Tuned Mass Dampers ◽  
Mass Damper ◽  
Modal Mass ◽  
Story Building ◽  
Selection Of ◽  
Multiple Tuned Mass Dampers

The primary objective of this research is to find the effectiveness of an adaptive multiple tuned mass damper distributed along with the story height to control the seismic response of the structure. The seismic performance of a 10-story building was investigated, which proved the efficiency of the adaptive multiple tuned mass damper. Structures with single tuned mass damper and multiple tuned mass dampers were also modeled considering the location of the dampers at the top of the structure, whereas adaptive multiple tuned mass damper of the structure was modeled based on the story height. Selection of the location of the adaptive multiple tuned mass damper along with the story height was dominated by the modal parameters. Participation of modal mass directly controlled the number of the modes to be considered. To set the stage, a comparative study on the displacements and modal energies of the structures under the El-Centro, California, and North-Ridge earthquakes was conducted with and without various types of tuned mass dampers. The result shows a significant capability of the proposed adaptive multiple tuned mass damper as an alternative tool to reduce the earthquake responses of multi-story buildings.

Effectiveness of Location and Number of Multiple Tuned Mass Damper for Seismic Structures

2020 ◽  
Vol 9 (6) ◽  
pp. 780-783
Keyword(s):  
Seismic Response ◽  
Software Tool ◽  
Tuned Mass Damper ◽  
Structure Study ◽  
Structural Performance ◽  
Mass Ratio ◽  
Tuned Mass Dampers ◽  
Maximum Reduction ◽  
Mass Damper ◽  
Earthquake Data

Tuned mass dampers (TMD) are one of the most reliable devices to control the vibration of the structure. The optimum mass ratio required for a single tuned mass damper (STMD) is evaluated corresponding to the fundamental natural frequency of the structure. The effect of STMD and Multiple tuned mass dampers (MTMD) on a G+20 storey structure are studied to demonstrate the damper’s effectiveness in seismic application. The location and number of tuned mass dampers are studied to give best structural performance in maximum reduction of seismic response for El Centro earthquake data. The analysis results from SAP 2000 software tool shows damper weighing 2.5% of the total weight of the structure effectively reduce the response of the structure. Study shows that introduction of 4-MTMD at top storey can effectively reduce the response by 10% more in comparison to single tuned mass damper. The use of MTMD of same mass ratio that of STMD is more effective in seismic response.

Back-iron design-based electromagnetic regenerative tuned mass damper

2020 ◽  
Vol 234 (3) ◽  
pp. 607-622
Author(s):  
Semen Kopylov ◽  
Zhaobo Chen ◽  
Mohamed AA Abdelkareem
Keyword(s):  
Root Mean Square ◽  
Tuned Mass Damper ◽  
Harmonic Excitation ◽  
Experimental Results ◽  
Mean Square ◽  
Tuned Mass Dampers ◽  
Practical Applications ◽  
Mass Damper ◽  
Compact Dimension ◽  
Regenerative Power

Implementation of tuned mass dampers is the commonly used approach to avoid excessive vibrations in civil engineering. However, due to the absence of the compact dimension, there are still no practical applications of the tuned mass dampers in automotive industry. Meanwhile, recent investigations showed the benefit of utilizing a tuned mass damper in a vehicle suspension in terms of driving comfort and road holding. Thus, the current investigation aimed to explore a novel compact dimension tuned mass damper, which can provide both sufficient vibration mitigation and energy harvesting. This paper presents a prototype of a back-iron-based design of an electromagnetic regenerative tuned mass damper. The mathematical model of the tuned mass damper system was developed and has been validated by the experimental results of the tuned mass damper prototype implemented in a protected mass test-bench. The indicated results concluded that the attenuation performance dramatically deteriorated under random excitations and a reduction in the root-mean-square acceleration of 18% is concluded compared to the case with undamped tuned mass damper. Under harmonic excitations, the designed tuned mass damper prototype is able to reduce the peak acceleration value of the protected structure by 79%. According to the experimental results, the designed tuned mass damper prototype revealed a peak regenerative power of 0.76 W under a harmonic excitation of 8.1 Hz frequency [Formula: see text]m amplitude. Given the simulated random road profiles from C to E, the back-iron electromagnetic tuned mass damper indicated that root-mean-square harvested power from 0.6 to 6.4 W, respectively.

Analytical analysis for the design of nonlinear tuned mass damper

2020 ◽  
Vol 26 (9-10) ◽  
pp. 646-658
Author(s):  
Lu-yu Li ◽  
Tianjiao Zhang
Keyword(s):  
Passive Control ◽  
Design Method ◽  
Tuned Mass Damper ◽  
Control Device ◽  
Control Performance ◽  
Tuned Mass Dampers ◽  
Mass Damper ◽  
Practical Engineering ◽  
Optimum Formula ◽  
Nonlinear Tuned Mass Damper

A tuned mass damper is a passive control device that has been widely used in aerospace, mechanical, and civil engineering as well as many other fields. Tuned mass dampers have been studied and improved over the course of many years. In practical engineering applications, a tuned mass damper inevitably produces some nonlinear characteristics due to the large displacement and the use of the limiting devices, but this nonlinearity is often neglected. The simulation results in this study confirm that neglecting the nonlinearity in the design process can produce adverse effects on the control performance. This paper takes into account the nonlinearity of the tuned mass damper produced in the process of vibration and deduces an optimum formula for the frequency of a tuned mass damper by the complexification averaging method and multiscale method. Based on this formula, a modified design method for the frequency of a tuned mass damper is presented. The numerical results show that the nonlinear tuned mass damper after modification is better than a linear tuned mass damper in terms of control performance.

PERFORMANCE OF DUAL-LAYER MULTIPLE TUNED MASS DAMPERS FOR STRUCTURES UNDER GROUND EXCITATIONS

2006 ◽  
Vol 06 (04) ◽  
pp. 541-557 ◽  
Author(s):  
CHUNXIANG LI
Keyword(s):  
Natural Frequencies ◽  
Vibration Mode ◽  
Frequency Tuning ◽  
Tuned Mass Damper ◽  
Tuned Mass Dampers ◽  
Optimum Parameters ◽  
Generalized System ◽  
Magnification Factors ◽  
Mass Damper ◽  
Multiple Tuned Mass Dampers

The dual-layer multiple tuned mass dampers (DL-MTMD) with a uniform distribution of natural frequencies are proposed, which consist of one large tuned mass damper (L-TMD) and an arbitrary number of small tuned mass dampers (S-TMD). The structure is represented by a generalized system corresponding to the specific vibration mode to be controlled. The criterion for assessing the optimum parameters and effectiveness of the DL-MTMD is based on the minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure installed with the DL-MTMD. Also considered is the stroke of the DL-MTMD. The proposed DL-MTMD system is demonstrated to show higher effectiveness and robustness to the change in frequency tuning, in comparison to the multiple tuned mass dampers (MTMD) with equal total mass ratios. It is also demonstrated to be more effective than the dual tuned mass dampers (DTMD) with one large and one small tuned mass damper, but they maintain the same level of robustness to the change in frequency tuning. The DL-MTMD system can be easily manufactured as the optimum value for the linking dashpots between the structure and L-TMD is shown to be zero.

scholarly journals Analysis of Load Reduction of Floating Wind Turbines Using Passive Tuned Mass Dampers

2021 ◽  
Vol 9 (9) ◽  
pp. 1340-1345
Author(s):  
Aabas Ahmad
Keyword(s):  
Standard Deviation ◽  
Wind Turbine ◽  
Tuned Mass Damper ◽  
Mass Ratio ◽  
Longitudinal Displacement ◽  
Wave Load ◽  
Tuned Mass Dampers ◽  
Floating Wind Turbine ◽  
Mass Damper ◽  
Offshore Floating Wind Turbine

Abstract: An efficient method for restraining the large vibration displacements and loads of offshore floating wind turbines under harsh marine environment is proposed by putting tuned mass dampers in the cabin. A dynamics model for a barge-type offshore floating wind turbine with a fore–aft tuned mass damper is established based on Lagrange’s equations; the nonlinear least squares Leven berg–Marquardt algorithm is employed to identify the parameters of the wind turbine; different parameter optimization methods are adopted to optimize tuned mass damper parameters by considering the standard deviation of the tower top longitudinal displacement as the objective function. Aiming at five typical combined wind and wave load cases under normal running state of the wind turbine, the dynamic responses of the wind turbine with/without tuned mass damper are simulated and the suppression effect of the tuned mass damper is investigated over the wide range of load cases. The results show that when the wind turbine vibrates in the state of damped free vibration, the standard deviation of the tower top longitudinal displacement is decreased approximately 60% in 100 s by the optimized tuned mass damper with the optimum tuned mass damper mass ratio 1.8%. The standard deviation suppression rates of the longitudinal displacements and loads in the tower and blades increase with the tuned mass damper mass ratio when the wind turbine vibrates under the combined wind and wave load cases. When the mass ratio changes from 0.5% to 2%, the maximum suppression rates vary from 20% to 50% correspondingly, which effectively reduce vibration responses of the offshore floating wind turbine. The results of this article preliminarily verify the feasibilities of using a tuned mass damper for restraining vibration of the barge-type offshore floating wind turbine

scholarly journals Improvement of Performance Level of Steel Moment-Resisting Frames Using Tuned Mass Damper System

2020 ◽  
Vol 10 (10) ◽  
pp. 3403 ◽  
Author(s):  
Masoud Dadkhah ◽  
Reza Kamgar ◽  
Heisam Heidarzadeh ◽  
Anna Jakubczyk-Gałczyńska ◽  
Robert Jankowski
Keyword(s):  
Steel Structures ◽  
Tuned Mass Damper ◽  
Performance Level ◽  
Base Shear ◽  
Tuned Mass Dampers ◽  
Ground Acceleration ◽  
Steel Moment Resisting Frames ◽  
Drift Ratio ◽  
Mass Damper ◽  
Moment Resisting

In this paper, parameters of the tuned mass dampers are optimized to improve the performance level of steel structures during earthquakes. In this regard, a six-story steel frame is modeled using a concentrated plasticity method. Then, the optimum parameters of the Tuned Mass Damper (TMD) are determined by minimizing the maximum drift ratio of the stories. The performance level of the structure is also forced to be located in a safety zone. The incremental dynamic analysis is used to analyze the structural behavior under the influence of the artificial, near- and far-field earthquakes. The results of the investigation clearly show that the optimization of the TMD parameters, based on minimizing the drift ratio, reduces the structural displacement, and improves the seismic behavior of the structure based on Federal Emergency Management Agency (FEMA-356). Moreover, the values of base shear have been decreased for all studied records with peak ground acceleration smaller or equal to 0.5 g.

Vibration Control Performance of Damping Coupled Tuned Mass Dampers

2004 ◽  
Author(s):  
Nobuo Masaki ◽  
Hisashi Hirata
Keyword(s):  
Vibration Control ◽  
Natural Frequency ◽  
Tuned Mass Damper ◽  
Control Performance ◽  
Tuned Mass Dampers ◽  
Mass Unit ◽  
Optimal Value ◽  
Mass Damper ◽  
Rubber Bearings ◽  
Prefabricated Houses

Recently tuned mass dampers have been installed on three-story prefabricated houses for reducing of traffic-induced vibration and improving living comfort. This tuned mass damper consists of a mass unit, spring units and laminated rubber bearings. The mass is supported by four laminated rubber bearings, and spring units are used for adjusting the natural frequency of the tuned mass damper to the optimal value. Vibration control performance of this type of tuned mass dampers is deteriorated when the natural frequency of the house is changed. To solve this problem, the authors have developed a damping coupled tuned mass damper. In this type of tuned mass damper, two mass units having slightly different natural frequencies are coupled by using a damping unit. In this paper, mechanism and vibration control performance of the damping coupled tuned mass damper are described.

Simultaneous energy harvesting and vibration control of structures with tuned mass dampers

2012 ◽  
Vol 23 (18) ◽  
pp. 2117-2127 ◽  
Author(s):  
Xiudong Tang ◽  
Lei Zuo
Keyword(s):  
Energy Harvesting ◽  
Vibration Control ◽  
Control Strategies ◽  
Tall Buildings ◽  
Tuned Mass Damper ◽  
Vibration Energy ◽  
Damping Force ◽  
Tuned Mass Dampers ◽  
Mass Damper ◽  
Self Powered

The vibrations of the tall buildings are serious concerns to both engineers and architects for the protection of the safety of the structure and occupant comfort. In order to mitigate the vibration, different approaches have been proposed, among which tuned mass dampers are one of the most preferable and have been widely used in practice. Instead of dissipating the vibration energy into heat waste via the viscous damping element, this article presents an approach to harvest the vibration energy from tall buildings with tuned mass dampers, by replacing the energy-dissipating element with an electromagnetic harvester. This article demonstrates that vibration mitigation and energy harvesting can be achieved simultaneously by the utilization of an electricity-generating tuned mass damper and relevant algorithms. Based on the proposed switching energy harvesting circuit, three control strategies are investigated in this article, namely, semi-active, self-powered active, and passive-matching regenerative. The functions of the energy harvesting circuit on damping force control and power regulation, as well the effectiveness of the control strategies, are illustrated by simulation. The simultaneous energy harvesting and vibration control are demonstrated, for the first time, by experiment based on a three-story building prototype with the electricity-generating tuned mass damper, which is composed of a rotational brushed direct current motor and rack–pinion mechanism.

Sign in / Sign up

Export Citation Format

Share Document