scholarly journals INFLUENCE OF RADIATION DAMAGE OF REACTOR INNER COMPONENTS ON THE RESULTS OF INDENTATION TESTS

2018 ◽  
Vol 17 ◽  
pp. 10
Author(s):  
Jan Ondracek ◽  
Ales Materna
Keyword(s):  
Numerical Simulations ◽  
Austenitic Steel ◽  
Radiation Damage ◽  
Material Properties ◽  
Indentation Test ◽  
Indentation Tests ◽  
Reactor Type

Irradiation of inner components of the WWER reactor type made from austenitic steel 08Ch18N10T alters their material properties and may cause component degradation. Numerical simulations of the indentation test on the non- and neutron-irradiated reactor's inner components were carried out. The aim of this study is to find out whether the indentation test is suitable for assessing the material radiation damage of studied components.

MATERIAL CHARACTERIZATION BASED ON INSTRUMENTED AND SIMULATED INDENTATION TESTS

2009 ◽  
Vol 01 (01) ◽  
pp. 61-84 ◽  
Author(s):  
ZISHUN LIU ◽  
EDY HARSONO ◽  
SOMSAK SWADDIWUDHIPONG
Keyword(s):  
Neural Network ◽  
Material Properties ◽  
Indentation Test ◽  
Network Models ◽  
Spherical Indentation ◽  
Instrumented Indentation ◽  
Neural Network Models ◽  
Advantages And Disadvantages ◽  
Indentation Tests ◽  
Load Displacement

This paper reviews various techniques to characterize material by interpreting load-displacement data from instrumented indentation tests. Scaling and dimensionless analysis was used to generalize the universal relationships between the characteristics of indentation curves and their material properties. The dimensionless functions were numerically calibrated via extensive finite element analysis. The interpretation of load-displacement curves from the established relationships was thus carried out by either solving higher order functions iteratively or employing neural networks. In this study, the advantages and disadvantages of these techniques are highlighted. Several issues in an instrumented indentation test such as friction, size effect and uniqueness of reverse analysis algorithms are discussed. In this study, a new reverse algorithm via neural network models to extract the mechanical properties by dual Berkovich and spherical indentation tests is introduced. The predicted material properties based on the proposed neural network models agree well with the numerical input data.

scholarly journals In Situ Microindentation for Determining Local Subchondral Bone Compressive Modulus

2010 ◽  
Vol 132 (9) ◽  
Author(s):  
Mack G. Gardner-Morse ◽  
Nelson J. Tacy ◽  
Bruce D. Beynnon ◽  
Maria L. Roemhildt
Keyword(s):  
Articular Cartilage ◽  
Subchondral Bone ◽  
Reference Values ◽  
Material Properties ◽  
Indentation Test ◽  
Lateral Compartment ◽  
Polyurethane Foams ◽  
Compressive Modulus ◽  
Sprague Dawley ◽  
Indentation Tests

Alterations to joint tissues, including subchondral bone, occur with osteoarthritis. A microindentation technique was developed to determine the local compressive modulus of subchondral bone. This test, in conjunction with a cartilage indentation test at the same location, could evaluate changes of these material properties in both tissues. The accuracy of the technique was determined by applying it to materials of known moduli. The technique was then applied to rat tibial plateaus to characterize the local moduli of the subchondral bone. An established nanoindentation method was adopted to determine the modulus of subchondral bone following penetration of the overlying articular cartilage. Three cycles of repeated loadings were applied (2.452 N, 30 s hold). The slope of the load-displacement response during the unloading portion of the third cycle was used to measure the stiffness. Indentation tests were performed on two polyurethane foams and polymethyl-methacrylate for validation (n=15). Regression analysis was used to compare the moduli with reference values. Subchondral bone moduli of tibial plateaus from Sprague-Dawley rats (n=5) were measured for central and posterior locations of medial and lateral compartments. An analysis of variance was used to analyze the effects of compartment and test location. The measured moduli of the validation materials correlated with the reference values (R2=0.993, p=0.05). In rat tibial plateaus, the modulus of the posterior location was significantly greater than the center location (4.03±1.00 GPa and 3.35±1.16 GPa respectively, p=0.03). The medial compartment was not different from the lateral compartment. This method for measuring the subchondral bone in the same location as articular cartilage allows studies of the changes in these material properties with the onset and progression of osteoarthritis.

scholarly journals Conventional Vickers and true instrumented indentation hardness determined by instrumented indentation tests

2010 ◽  
Vol 25 (2) ◽  
pp. 337-343 ◽  
Author(s):  
Seung-Kyun Kang ◽  
Ju-Young Kim ◽  
Chan-Pyoung Park ◽  
Hyun-Uk Kim ◽  
Dongil Kwon
Keyword(s):  
Mechanical Properties ◽  
Vickers Hardness ◽  
Material Properties ◽  
Indentation Test ◽  
Indentation Hardness ◽  
Instrumented Indentation ◽  
Real Contact ◽  
Wide Range ◽  
Indentation Tests ◽  
Instrumented Indentation Test

We evaluate Vickers hardness and true instrumented indentation test (IIT) hardness of 24 metals over a wide range of mechanical properties using just IIT parameters by taking into account the real contact morphology beneath the Vickers indenter. Correlating the conventional Vickers hardness, indentation contact morphology, and IIT parameters for the 24 metals reveals relationships between contact depths and apparent material properties. We report the conventional Vickers and true IIT hardnesses measured only from IIT contact depths; these agree well with directly measured hardnesses within ±6% for Vickers hardness and ±10% for true IIT hardness.

scholarly journals A computational modeling approach based on random fields for short fiber-reinforced composites with experimental verification by nanoindentation and tensile tests

2021 ◽  
Author(s):  
Natalie Rauter
Keyword(s):  
Numerical Simulations ◽  
Correlation Functions ◽  
Material Properties ◽  
Random Fields ◽  
Tensile Tests ◽  
Short Fiber ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Component Level

AbstractIn this study a modeling approach for short fiber-reinforced composites is presented which allows one to consider information from the microstructure of the compound while modeling on the component level. The proposed technique is based on the determination of correlation functions by the moving window method. Using these correlation functions random fields are generated by the Karhunen–Loève expansion. Linear elastic numerical simulations are conducted on the mesoscale and component level based on the probabilistic characteristics of the microstructure derived from a two-dimensional micrograph. The experimental validation by nanoindentation on the mesoscale shows good conformity with the numerical simulations. For the numerical modeling on the component level the comparison of experimentally obtained Young’s modulus by tensile tests with numerical simulations indicate that the presented approach requires three-dimensional information of the probabilistic characteristics of the microstructure. Using this information not only the overall material properties are approximated sufficiently, but also the local distribution of the material properties shows the same trend as the results of conducted tensile tests.

Identification of Hardening Parameters of Metals From Spherical Indentation Tests

2001 ◽  
Vol 123 (3) ◽  
pp. 245-250 ◽  
Author(s):  
S. Kucharski ◽  
Z. Mro´z
Keyword(s):  
Indentation Test ◽  
Strain Curve ◽  
Load Level ◽  
Spherical Indentation ◽  
Indentation Tests ◽  
Geometric Sequence ◽  
Loading And Unloading ◽  
Plastic Hardening ◽  
Hardening Curve ◽  
Two Parameters

The identification method of hardening parameters specifying stress-strain curve is proposed by applying spherical indentation test and measuring the penetration depth during loading and unloading. The loading program is composed of a geometric sequence of loading and partial unloading steps from which the variation of permanent penetration with load level is determined. This data is used for specification of two parameters k and m occurring in the plastic hardening curve εp=σ/k1/m, where εp denotes the plastic strain.

scholarly journals Analysis of depth-sensing indentation tests with a Knoop indenter

2001 ◽  
Vol 16 (6) ◽  
pp. 1660-1667 ◽  
Author(s):  
L. Riester ◽  
T. J. Bell ◽  
A. C. Fischer-Cripps
Keyword(s):  
Elastic Modulus ◽  
Elastic Recovery ◽  
Indentation Test ◽  
New Method ◽  
Short Axis ◽  
Depth Sensing ◽  
Specimen Material ◽  
Indentation Tests ◽  
Conventional Methods ◽  
Knoop Indenter

The present work shows how data obtained in a depth-sensing indentation test using a Knoop indenter may be analyzed to provide elastic modulus and hardness of the specimen material. The method takes into account the elastic recovery along the direction of the short axis of the residual impression as the indenter is removed. If elastic recovery is not accounted for, the elastic modulus and hardness are overestimated by an amount that depends on the ratio of E/H of the specimen material. The new method of analysis expresses the elastic recovery of the short diagonal of the residual impression into an equivalent face angle for one side of the Knoop indenter. Conventional methods of analysis using this corrected angle provide results for modulus and hardness that are consistent with those obtained with other types of indenters.

Effect of Ramp Angle on the Anti-Loosening Ability of Wedge Self-Locking Nuts Under Vibration

2018 ◽  
Vol 140 (7) ◽  
Author(s):  
Jianhua Liu ◽  
Hao Gong ◽  
Xiaoyu Ding
Keyword(s):  
Finite Element ◽  
Numerical Simulations ◽  
Production Technology ◽  
Material Properties ◽  
Threshold Value ◽  
Commercial Production ◽  
Experimental Results ◽  
Fe Method ◽  
Transversal Vibration

Recently, the wedge self-locking nut, a special anti-loosening product, is receiving more attention because of its excellent reliability in preventing loosening failure under vibration conditions. The key characteristic of a wedge self-locking nut is the special wedge ramp at the root of the thread. In this work, the effect of ramp angle on the anti-loosening ability of wedge self-locking nuts was studied systematically based on numerical simulations and experiments. Wedge self-locking nuts with nine ramp angles (10 deg, 15 deg, 20 deg, 25 deg, 30 deg, 35 deg, 40 deg, 45 deg, and 50 deg) were modeled using a finite element (FE) method, and manufactured using commercial production technology. Their anti-loosening abilities under transversal vibration conditions were analyzed based on numerical and experimental results. It was found that there is a threshold value of the initial preload below which the wedge self-locking nuts would lose their anti-loosening ability. This threshold value of initial preload was then proposed for use as a criterion to evaluate the anti-loosening ability of wedge self-locking nuts quantitatively and to determine the optimal ramp angle. Based on this criterion, it was demonstrated, numerically and experimentally, that a 30 deg wedge ramp resulted in the best anti-loosening ability among nine ramp angles studied. The significance of this study is that it provides an effective method to evaluate the anti-loosening ability of wedge self-locking nuts quantitatively, and determined the optimal ramp angle in terms of anti-loosening ability. The proposed method can also be used to optimize other parameters, such as the material properties and other dimensions, to guarantee the best anti-loosening ability of wedge self-locking nuts.

ELASTO-PLASTIC PROPERTIES OF Mo-MODIFIED Ti DEDUCED FROM INDENTATION TESTS AND FINITE ELEMENT ANALYSIS

2019 ◽  
Vol 26 (07) ◽  
pp. 1850225
Author(s):  
YONG MA ◽  
ZHAO YANG ◽  
SHENGWANG YU ◽  
BING ZHOU ◽  
HONGJUN HEI ◽  
...  
Keyword(s):  
Finite Element ◽  
Surface Treatment ◽  
Load Capacity ◽  
Indentation Test ◽  
Element Analysis ◽  
Plastic Properties ◽  
Polynomial Expression ◽  
Indentation Tests ◽  
Graded Material ◽  
Micro Indentation

The aim of this paper is to establish an approach to quantitatively determine the elasto-plastic parameters of the Mo-modified Ti obtained by the plasma surface alloying technique. A micro-indentation test is conducted on the surface under 10[Formula: see text]N. Considering size effects, nanoindentation tests are conducted on the cross-section with two loads of 6 and 8[Formula: see text]mN. Assuming nanoindentation testing sublayers are homogeneous, finite element reverse analysis is adopted to determine their plastic parameters. According to the gradient distributions of the elasto-plastic parameters with depth in the Mo-modified Ti, two types of mathematical expressions are proposed. Compared with the polynomial expression, the linear simplified expression does not need the graded material to be sectioned and has practical utility in the surface treatment industry. The validation of the linear simplified expression is verified by the micro-indentation test and corresponding finite element forward analysis. This approach can assist in improving the surface treatment process of the Mo-modified Ti and further enhancing its load capacity and wear resistance.

scholarly journals Buckling of a coated elastic half-space when the coating and substrate have similar material properties

2015 ◽  
Vol 471 (2178) ◽  
pp. 20140979 ◽  
Author(s):  
Y. B. Fu ◽  
P. Ciarletta
Keyword(s):  
Numerical Simulations ◽  
Material Properties ◽  
Deformation Gradient ◽  
Critical Value ◽  
Elastic Half Space ◽  
Similar Material ◽  
Fully Nonlinear ◽  
Shear Moduli ◽  
Subcritical Regime ◽  
Post Buckling

This study investigates the buckling of a uni-axially compressed neo-Hookean thin film bonded to a neo-Hookean substrate. Previous studies have shown that the elastic bifurcation is supercritical if r ≡ μ f / μ s >1.74 and subcritical if r <1.74, where μ f and μ s are the shear moduli of the film and substrate, respectively. Moreover, existing numerical simulations of the fully nonlinear post-buckling behaviour have all been focused on the regime r >1.74. In this paper, we consider instead a subset of the regime r <1.74, namely when r is close to unity. Four near-critical regimes are considered. In particular, it is shown that, when r >1 and the stretch is greater than the critical stretch (the subcritical regime), there exists a localized solution that arises as the limit of modulated periodic solutions with increasingly longer and longer decaying tails. The evolution of each modulated periodic solution is followed as r is decreased, and it is found that there exists a critical value of r at which the deformation gradient develops a discontinuity and the solution becomes a static shock. The semi-analytical results presented could help future numerical simulations of the fully nonlinear post-buckling behaviour.

Comparison of biphasic material properties of equine articular cartilage estimated from stress relaxation and creep indentation tests

2021 ◽  
Vol 7 (2) ◽  
pp. 363-366
Author(s):  
Thomas Reuter ◽  
Christof Hurschler
Keyword(s):  
Articular Cartilage ◽  
Stress Relaxation ◽  
Material Properties ◽  
Soft Tissues ◽  
Sensitivity Analyses ◽  
Creep Model ◽  
Fe Model ◽  
Relaxation Model ◽  
Marquardt Algorithm ◽  
Indentation Tests

Abstract Mechanical parameters of hard and soft tissues are explicit markers for quantitative tissue characterization. In this study, we present a comparison of biphasic material properties of equine articular cartilage estimated from stress relaxation (ε = 6 %, t = 1000 s) and creep indentation tests (F = 0.1 N, t = 1000 s). A biphasic 3D-FE-based method is used to determine the biomechanical properties of equine articular cartilage. The FE-model computation was optimized by exploiting the axial symmetry and mesh resolution. Parameter identification was executed with the Levenberg- Marquardt-algorithm. Additionally, sensitivity analyses of the calculated biomechanical parameters were performed. Results show that the Young’s modulus E has the largest influence and the Poisson’s ratio of ν ≤ 0.1 is rather insensitive. The R² of the fit results varies between 0.882 and 0.974 (creep model) and between 0.695 and 0.930 (relaxation model). The averaged parameters E and k determined from the creep model yield higher values in comparison to the relaxation model. The differences can be traced back to the experimental settings and to the biphasic material model.

Sign in / Sign up

Export Citation Format

Share Document