scholarly journals In Situ Microindentation for Determining Local Subchondral Bone Compressive Modulus

2010 ◽  
Vol 132 (9) ◽  
Author(s):  
Mack G. Gardner-Morse ◽  
Nelson J. Tacy ◽  
Bruce D. Beynnon ◽  
Maria L. Roemhildt
Keyword(s):  
Articular Cartilage ◽  
Subchondral Bone ◽  
Reference Values ◽  
Material Properties ◽  
Indentation Test ◽  
Lateral Compartment ◽  
Polyurethane Foams ◽  
Compressive Modulus ◽  
Sprague Dawley ◽  
Indentation Tests

Alterations to joint tissues, including subchondral bone, occur with osteoarthritis. A microindentation technique was developed to determine the local compressive modulus of subchondral bone. This test, in conjunction with a cartilage indentation test at the same location, could evaluate changes of these material properties in both tissues. The accuracy of the technique was determined by applying it to materials of known moduli. The technique was then applied to rat tibial plateaus to characterize the local moduli of the subchondral bone. An established nanoindentation method was adopted to determine the modulus of subchondral bone following penetration of the overlying articular cartilage. Three cycles of repeated loadings were applied (2.452 N, 30 s hold). The slope of the load-displacement response during the unloading portion of the third cycle was used to measure the stiffness. Indentation tests were performed on two polyurethane foams and polymethyl-methacrylate for validation (n=15). Regression analysis was used to compare the moduli with reference values. Subchondral bone moduli of tibial plateaus from Sprague-Dawley rats (n=5) were measured for central and posterior locations of medial and lateral compartments. An analysis of variance was used to analyze the effects of compartment and test location. The measured moduli of the validation materials correlated with the reference values (R2=0.993, p=0.05). In rat tibial plateaus, the modulus of the posterior location was significantly greater than the center location (4.03±1.00 GPa and 3.35±1.16 GPa respectively, p=0.03). The medial compartment was not different from the lateral compartment. This method for measuring the subchondral bone in the same location as articular cartilage allows studies of the changes in these material properties with the onset and progression of osteoarthritis.

scholarly journals Tissue Modification of the Lateral Compartment of the Tibio-Femoral Joint Following In Vivo Varus Loading in the Rat

2012 ◽  
Vol 134 (10) ◽  
Author(s):  
M. L. Roemhildt ◽  
B. D. Beynnon ◽  
M. Gardner-Morse ◽  
K. Anderson ◽  
G. J. Badger
Keyword(s):  
Articular Cartilage ◽  
Subchondral Bone ◽  
Compressive Loading ◽  
Compressive Load ◽  
Lateral Compartment ◽  
Peripheral Region ◽  
Degenerative Changes ◽  
Medial Compartment ◽  
Compressive Loads

This study describes the first application of a varus loading device (VLD) to the rat hind limb to study the role of sustained altered compressive loading and its relationship to the initiation of degenerative changes to the tibio-femoral joint. The VLD applies decreased compressive load to the lateral compartment and increased compressive load to the medial compartment of the tibio-femoral joint in a controlled manner. Mature rats were randomized into one of three groups: unoperated control, 0% (sham), or 80% body weight (BW). Devices were attached to an animal’s leg to deliver altered loads of 0% and 80% BW to the experimental knee for 12 weeks. Compartment-specific material properties of the tibial cartilage and subchondral bone were determined using indentation tests. Articular cartilage, calcified cartilage, and subchondral bone thicknesses, articular cartilage cellularity, and degeneration score were determined histologically. Joint tissues were sensitive to 12 weeks of decreased compressive loading in the lateral compartment with articular cartilage thickness decreased in the peripheral region, subchondral bone thickness increased, and cellularity of the midline region decreased in the 80% BW group as compared to the 0% BW group. The medial compartment revealed trends for diminished cellularity and aggregate modulus with increased loading. The rat-VLD model provides a new system to evaluate altered quantified levels of chronic in vivo loading without disruption of the joint capsule while maintaining full use of the knee. These results reveal a greater sensitivity of tissue parameters to decreased loading versus increased loading of 80% BW for 12 weeks in the rat. This model will allow future mechanistic studies that focus on the initiation and progression of degenerative changes with increased exposure in both magnitude and time to altered compressive loads.

Comparison of biphasic material properties of equine articular cartilage estimated from stress relaxation and creep indentation tests

2021 ◽  
Vol 7 (2) ◽  
pp. 363-366
Author(s):  
Thomas Reuter ◽  
Christof Hurschler
Keyword(s):  
Articular Cartilage ◽  
Stress Relaxation ◽  
Material Properties ◽  
Soft Tissues ◽  
Sensitivity Analyses ◽  
Creep Model ◽  
Fe Model ◽  
Relaxation Model ◽  
Marquardt Algorithm ◽  
Indentation Tests

Abstract Mechanical parameters of hard and soft tissues are explicit markers for quantitative tissue characterization. In this study, we present a comparison of biphasic material properties of equine articular cartilage estimated from stress relaxation (ε = 6 %, t = 1000 s) and creep indentation tests (F = 0.1 N, t = 1000 s). A biphasic 3D-FE-based method is used to determine the biomechanical properties of equine articular cartilage. The FE-model computation was optimized by exploiting the axial symmetry and mesh resolution. Parameter identification was executed with the Levenberg- Marquardt-algorithm. Additionally, sensitivity analyses of the calculated biomechanical parameters were performed. Results show that the Young’s modulus E has the largest influence and the Poisson’s ratio of ν ≤ 0.1 is rather insensitive. The R² of the fit results varies between 0.882 and 0.974 (creep model) and between 0.695 and 0.930 (relaxation model). The averaged parameters E and k determined from the creep model yield higher values in comparison to the relaxation model. The differences can be traced back to the experimental settings and to the biphasic material model.

Improved Techniques for Measuring the Indentation and Thickness of Articular Cartilage

1989 ◽  
Vol 203 (3) ◽  
pp. 143-150 ◽  
Author(s):  
A C Swann ◽  
B B Seedhom
Keyword(s):  
Articular Cartilage ◽  
High Speed ◽  
Articular Surface ◽  
Indentation Test ◽  
Displacement Transducer ◽  
Data Logging ◽  
Large Numbers ◽  
Indentation Tests ◽  
The Moment ◽  
Measurement Repeatability

A review of the techniques previously employed in the indentation and measurement of the thickness of articular cartilage has led to new and improved techniques for performing both measurements. By utilizing high-speed, microcomputer-controlled data logging techniques, simultaneous monitoring of signals from a dynamic load cell and a displacement transducer could be made throughout an indentation test. The position of the indenter as it touched the articular surface could thus be determined automatically by identifying the moment at which a positive change in the load signal occurred. Less accurate and more time consuming techniques previously required for determining the position of the cartilage surface were hence avoided. The apparatus also included a critically damped dashpot which prevented any transient loads being applied to the cartilage. Depths of indentation could be measured to an accuracy of 0.005 mm with a measurement repeatability of 2.14 per cent. By replacing the indenter with a sharp needle, the apparatus was also capable of measuring the undeformed thickness of cartilage. An accuracy of ±0.012 mm could be achieved with a measurement repeatability of 1.2 per cent. The apparatus is particularly suited to survey work where large numbers of indentation tests are to be performed.

MATERIAL CHARACTERIZATION BASED ON INSTRUMENTED AND SIMULATED INDENTATION TESTS

2009 ◽  
Vol 01 (01) ◽  
pp. 61-84 ◽  
Author(s):  
ZISHUN LIU ◽  
EDY HARSONO ◽  
SOMSAK SWADDIWUDHIPONG
Keyword(s):  
Neural Network ◽  
Material Properties ◽  
Indentation Test ◽  
Network Models ◽  
Spherical Indentation ◽  
Instrumented Indentation ◽  
Neural Network Models ◽  
Advantages And Disadvantages ◽  
Indentation Tests ◽  
Load Displacement

This paper reviews various techniques to characterize material by interpreting load-displacement data from instrumented indentation tests. Scaling and dimensionless analysis was used to generalize the universal relationships between the characteristics of indentation curves and their material properties. The dimensionless functions were numerically calibrated via extensive finite element analysis. The interpretation of load-displacement curves from the established relationships was thus carried out by either solving higher order functions iteratively or employing neural networks. In this study, the advantages and disadvantages of these techniques are highlighted. Several issues in an instrumented indentation test such as friction, size effect and uniqueness of reverse analysis algorithms are discussed. In this study, a new reverse algorithm via neural network models to extract the mechanical properties by dual Berkovich and spherical indentation tests is introduced. The predicted material properties based on the proposed neural network models agree well with the numerical input data.

scholarly journals The Effects of Annatto Tocotrienol Supplementation on Cartilage and Subchondral Bone in an Animal Model of Osteoarthritis Induced by Monosodium Iodoacetate

2019 ◽  
Vol 16 (16) ◽  
pp. 2897 ◽  
Author(s):  
Kok-Yong Chin ◽  
Sok Kuan Wong ◽  
Fadhlullah Zuhair Japar Sidik ◽  
Juliana Abdul Hamid ◽  
Nurul Hafizah Abas ◽  
...  
Keyword(s):  
Articular Cartilage ◽  
Subchondral Bone ◽  
Sham Group ◽  
Degenerative Joint Disease ◽  
Joint Disease ◽  
Sprague Dawley ◽  
Joint Protection ◽  
Sprague Dawley Rats ◽  
Monosodium Iodoacetate ◽  
Inflammatory Component

Osteoarthritis is a degenerative joint disease which primarily affects the articular cartilage and subchondral bones. Since there is an underlying localized inflammatory component in the pathogenesis of osteoarthritis, compounds like tocotrienol with anti-inflammatory properties may be able to retard its progression. This study aimed to determine the effects of oral tocotrienol supplementation on the articular cartilage and subchondral bone in a rat model of osteoarthritis induced by monosodium iodoacetate (MIA). Thirty male Sprague-Dawley rats (three-month-old) were randomized into five groups. Four groups were induced with osteoarthritis (single injection of MIA at week 0) and another served as the sham group. Three of the four groups with osteoarthritis were supplemented with annatto tocotrienol at 50, 100 and 150 mg/kg/day orally for five weeks. At week 5, all rats were sacrificed, and their tibial-femoral joints were harvested for analysis. The results indicated that the groups which received annatto tocotrienol at 100 and 150 mg/kg/day had lower histological scores and cartilage remodeling markers. Annatto tocotrienol at 150 mg/kg/day significantly lowered the osteocalcin levels and osteoclast surface of subchondral bone. In conclusion, annatto tocotrienol may potentially retard the progression of osteoarthritis. Future studies to confirm its mechanism of joint protection should be performed.

scholarly journals Comparison of biphasic material properties of equine articular cartilage from stress relaxation indentation tests with and without tension-compression nonlinearity

2018 ◽  
Vol 4 (1) ◽  
pp. 485-488
Author(s):  
Thomas Reuter ◽  
Christof Hurschler
Keyword(s):  
Articular Cartilage ◽  
Stress Relaxation ◽  
Material Properties ◽  
Collagen Matrix ◽  
Biomechanical Properties ◽  
Resolution Parameter ◽  
Marquardt Algorithm ◽  
Mesh Resolution ◽  
Indentation Tests ◽  
Order Of Magnitude

AbstractThe mechanical parameters of articular cartilage estimated from indentation tests depend on the constitutive model adopted to analyze the data. In this study, we present a 3D-FE-based method to determine the biomechanical properties of equine articular cartilage from stress relaxation indentation tests (ε = 6 %, t = 1000 s) whereby articular cartilage is modeled as a biphasic material without (BM) and with tension-compression nonlinearity (BMTCN). The FEmodel computation was optimized by exploiting the axial symmetry and mesh resolution. Parameter identification was executed with the Levenberg-Marquardt-algorithm. The R² of the fit results varies between 0.695 and 0.930 for the BMmodel and between 0.877 and 0.958 for the BMTCN-model. The differences of the R² occur from the more exact description of the initial stress relaxation behaviour by the fiber modulus from the BMTCN-model. The fiber modulus defines the collagen matrix of cartilage. Furthermore, for both models the determined values of Young’s modulus and permeability were in the same order of magnitude.

scholarly journals Conventional Vickers and true instrumented indentation hardness determined by instrumented indentation tests

2010 ◽  
Vol 25 (2) ◽  
pp. 337-343 ◽  
Author(s):  
Seung-Kyun Kang ◽  
Ju-Young Kim ◽  
Chan-Pyoung Park ◽  
Hyun-Uk Kim ◽  
Dongil Kwon
Keyword(s):  
Mechanical Properties ◽  
Vickers Hardness ◽  
Material Properties ◽  
Indentation Test ◽  
Indentation Hardness ◽  
Instrumented Indentation ◽  
Real Contact ◽  
Wide Range ◽  
Indentation Tests ◽  
Instrumented Indentation Test

We evaluate Vickers hardness and true instrumented indentation test (IIT) hardness of 24 metals over a wide range of mechanical properties using just IIT parameters by taking into account the real contact morphology beneath the Vickers indenter. Correlating the conventional Vickers hardness, indentation contact morphology, and IIT parameters for the 24 metals reveals relationships between contact depths and apparent material properties. We report the conventional Vickers and true IIT hardnesses measured only from IIT contact depths; these agree well with directly measured hardnesses within ±6% for Vickers hardness and ±10% for true IIT hardness.

scholarly journals INFLUENCE OF RADIATION DAMAGE OF REACTOR INNER COMPONENTS ON THE RESULTS OF INDENTATION TESTS

2018 ◽  
Vol 17 ◽  
pp. 10
Author(s):  
Jan Ondracek ◽  
Ales Materna
Keyword(s):  
Numerical Simulations ◽  
Austenitic Steel ◽  
Radiation Damage ◽  
Material Properties ◽  
Indentation Test ◽  
Indentation Tests ◽  
Reactor Type

Irradiation of inner components of the WWER reactor type made from austenitic steel 08Ch18N10T alters their material properties and may cause component degradation. Numerical simulations of the indentation test on the non- and neutron-irradiated reactor's inner components were carried out. The aim of this study is to find out whether the indentation test is suitable for assessing the material radiation damage of studied components.

scholarly journals Genetic Deletion of Interleukin-15 Is Not Associated with Major Structural Changes Following Experimental Post-Traumatic Knee Osteoarthritis in Rats

2021 ◽  
Vol 11 (15) ◽  
pp. 7118
Author(s):  
Ermina Hadzic ◽  
Garth Blackler ◽  
Holly Dupuis ◽  
Stephen James Renaud ◽  
Christopher Thomas Appleton ◽  
...  
Keyword(s):  
Articular Cartilage ◽  
Subchondral Bone ◽  
Structural Changes ◽  
Cartilage Damage ◽  
Wild Type ◽  
Significant Difference ◽  
Post Traumatic ◽  
Interleukin 15 ◽  
Joint Trauma ◽  
Surgically Induced

Post-traumatic osteoarthritis (PTOA) is a degenerative joint disease, leading to articular cartilage breakdown, osteophyte formation, and synovitis, caused by an initial joint trauma. Pro-inflammatory cytokines increase catabolic activity and may perpetuate inflammation following joint trauma. Interleukin-15 (IL-15), a pro-inflammatory cytokine, is increased in OA patients, although its roles in PTOA pathophysiology are not well characterized. Here, we utilized Il15 deficient rats to examine the role of IL-15 in PTOA pathogenesis in an injury-induced model. OA was surgically induced in Il15 deficient Holtzman Sprague-Dawley rats and control wild-type rats to compare PTOA progression. Semi-quantitative scoring of the articular cartilage, subchondral bone, osteophyte size, and synovium was performed by two blinded observers. There was no significant difference between Il15 deficient rats and wild-type rats following PTOA-induction across articular cartilage damage, subchondral bone damage, and osteophyte scoring. Similarly, synovitis scoring across six parameters found no significant difference between genetic variants. Overall, IL-15 does not appear to play a key role in the development of structural changes in this surgically-induced rat model of PTOA.

Sign in / Sign up

Export Citation Format

Share Document