scholarly journals Clinoptilolite in Drinking Water Treatment for Ammonia Removal

10.14311/192 ◽  
2001 ◽  
Vol 41 (1) ◽  
Author(s):  
H. M. Abd El-Hady ◽  
A. Grünwald ◽  
K. Vlčková ◽  
J. Zeithammerová
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Tap Water ◽  
Drinking Water Treatment ◽  
Fish Farming ◽  
Ammonia Removal ◽  
Ammonium Ion ◽  
Ammonium Removal ◽  
Exchange Processes ◽  
Heat Treated

In most countries today the removal of ammonium ions from drinking water has become almost a necessity. The natural zeolite clinoptiloliteis mined commercially in many parts of the world. It is a selective exchanger for the ammonium cation, and this has prompted its use in water treatment, wastewater treatment, swimming pools and fish farming. The work described in this paper provides dynamic data on cation exchange processes in clinoptilolite involving the NH4 +, Ca+2 and Mg+2 cations. We used material of natural origin – clinoptilolite from Nižný Hrabovec in Slovakia (particle-size 3–5 mm). The breakthrough capacity was determined by dynamic laboratory investigations, and we investigated the influence of thermal pretreatment of clinoptilolite and the concentration of regenerant solution (2, 5, and 10% NaCl). The concentrations of ammonium ion inputs in the tap water that we used were 10, 5, and 2 mg NH4 + l_1 and down to levels below 0.5 mg NH4 + l_1. The experimental results show that repeated pretreatment sufficiently improves the zeolite’s properties, and the structure of clinoptilolite remains unchanged during the loading and regeneration cycles. Ammonium removal capacities were increased by approximately 40 % and 20 % for heat-treated zeolite samples. There was no difference between the regenerates for 10% and 5% NaCl. We conclude that the use of zeolite is an attractive and promising method for ammonium removal.

scholarly journals Lewatit S100 in Drinking Water Treatment for Ammonia Removal

10.14311/186 ◽  
2001 ◽  
Vol 41 (1) ◽  
Author(s):  
H. M. Abd El-Hady ◽  
A. Grünwald ◽  
K. Vlčková ◽  
J. Zeithammerová
Keyword(s):  
Drinking Water ◽  
Tap Water ◽  
Exchange Process ◽  
Algal Growth ◽  
Drinking Water Treatment ◽  
Ammonia Removal ◽  
Ammonium Ion ◽  
Ammonium Concentration ◽  
Material Particle ◽  
Breakthrough Capacity

Ammonium nitrogen is the most important form of nitrogen that can cause excessive algal growth and stimulate eutrophication in surface water. The purpose of this study is to investigate the possibility of removing ammonium from drinking water by means of an ion Exchange process. Polymeric Lewatit S100 material (particle-size 0.3–1.2 mm) was used. The breakthrough capacity was determined by dynamic laboratory investigations and the concentration of regenerant solution (5 and 10 % NaCl) was investigated. The concentration of ammonium ion inputs in the tap water that we used were 10, 5 and 2 mg NH4+ l_1 and down to levels below 0.5 mg NH4 + l_1. The experimental results show that the breakthrough capacity was very small at ammonium concentration 2 mg NH4 + l_1 compared to its breakthrough capacity at ammonium concentration 10 mg NH4 + l_1. There was no difference between regeneration by 10 and 5 % NaCl. We conclude that the use of Lewatit S100 is an attractive and promising method for ammonium concentration greater than 5 mg NH4 + l_1 and till 10 mg NH4 + l_1 .

Use of a stable carbon isotope to assess the efficiency of a drinking water treatment method with CO2

2012 ◽  
Vol 65 (6) ◽  
pp. 983-988 ◽  
Author(s):  
M. Poberžnik ◽  
A. Leis ◽  
A. Lobnik
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Dissolved Inorganic Carbon ◽  
Tap Water ◽  
Stable Carbon Isotope ◽  
Research Work ◽  
Drinking Water Treatment ◽  
Treatment Method ◽  
Water Supply Systems ◽  
Co2 Gas

CO2 gas with a special isotopic signature (δ13C = −35.2‰ vs. VPDB) was used as a marker to evaluate the efficiency of a drinking water treatment method and the effect of an ultrasonic (US) stirrer. This treatment was developed to prevent precipitation and corrosion effects in water–supply systems. The research work was performed using a laboratory-scale pilot plant that was filled with tap water. The stable isotope analyses of δ13C-DIC (Dissolved Inorganic Carbon) in the water samples indicated that the maximum content of added CO2 gas in DIC was in the range of 35 to 45%. The use of the US stirrer during the entire experiment decreased the method's overall efficiency by 10%, due to degassing at a late stage of the experiment but accelerated the dissolution process in the early experimental stage.

scholarly journals Methane emission and methanotrophic activity in groundwater-fed drinking water treatment plants

2020 ◽  
Vol 20 (3) ◽  
pp. 819-827 ◽  
Author(s):  
Edmundas Maksimavičius ◽  
Peter Roslev
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Methane Emission ◽  
Drinking Water Treatment ◽  
Ammonia Removal ◽  
Limited Information ◽  
Gas Stripping ◽  
Sand Filters ◽  
Water Treatment Plants ◽  
Methane Oxidizing Bacteria

Abstract Groundwater for drinking water production may contain dissolved methane (CH4) at variable concentrations. Most of this important greenhouse gas is often vented to the atmosphere during primary aeration and gas stripping processes at drinking water treatment plants (DWTPs). However, limited information exists regarding emission and fate of methane at many groundwater-fed DWTPs. This study estimates emission of methane from 1,004 DWTPs in Denmark and includes data from 3,068 groundwater wells. The fate of methane and occurrence of methane oxidizing bacteria in DWTPs was examined, including the potential role in ammonia removal. Methane emission from Danish DWTPs was estimated to be 1.38–2.95 × 10−4 Tg CH4/y which corresponds to 0.05–0.11% of the national anthropogenic methane emission. Trace levels of methane remained in the drinking water after primary aeration and entered the sand filters as a potential microbial substrate. Methanotrophic bacteria and active methane oxidation was always detected in the sand filters at groundwater-fed DWTPs. Methanotrophic consortia isolated from DWTP sandfilters were inoculated into laboratory-scale sand filters and the activity confirmed that methanotrophic consortia can play a role in the removal of ammonia via assimilation and co-oxidation. This suggests a potential for facilitating the removal of inorganic constituents from drinking water using methane as a co-substrate.

scholarly journals Investigation on the fate of quinolone antibiotics in three drinking water treatment plants of China

2021 ◽  
Author(s):  
Zhiquan Liu ◽  
Yongpeng Xu ◽  
Yuan Wang ◽  
Fuyi Cui
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Tap Water ◽  
Drinking Water Treatment ◽  
Chemical Oxidation ◽  
Source Water ◽  
Water Treatment Plants ◽  
Detection Frequency ◽  
Quinolone Antibiotics ◽  
Carbon Filtration

Abstract Quinolone (QN) antibiotics are widely used all over the world and have been frequently detected in source water, but the occurrence in tap water and the treatment efficiencies of QNs by drinking-water treatment plants (DWTPs) were rarely reported. In the present study, the occurrence and distribution of six representative QNs in three urban DWTPs of China were investigated. The results showed that the concentrations of total QNs in the three source waters ranged from 26.4 ng/L to 313.8 ng/L and all of the six QNs were detectable with a detection frequency of 100% (4.6 to 121.7 ng/L). Enrofloxacin (ENR) and ofloxacin (OFL) were the dominant species of QNs and accounted for 40.1% to 79.5% of the total QNs. After the treatments, there were still considerable QNs in the finished water (total amounts of 74.9 ng/L to 148.4 ng/L). The adsorbed QNs could be readily treated with the removal of turbidity by DWTPs, but only a part of the dissolved QNs (13.6% to 68.5%) can be removed. This implies that the dissolved QNs were more hazardous in the source water. Pre-oxidation and disinfection could remove 15.8 ± 8.3% and 16.9 ± 10.8% of dissolved QNs, respectively, depending on the chemical structure of QNs and the types of oxidant. Chemical oxidation was more efficient than coagulation-sedimentation and filtration for the treatment of dissolved QNs. Ozone-granular activated carbon filtration may fail to remove dissolved QNs in the actual DWTPs, because of the insufficient dosage of oxidant and the competition effect of natural organic matter.

scholarly journals The Performance of Coconut Shell-based Activated Carbon (CSAC) in Treating Drinking Water

2013 ◽  
Vol 4 (3) ◽  
pp. 11-16 ◽  
Author(s):  
W. Chali ◽  
I. Yakub
Keyword(s):  
Drinking Water ◽  
Activated Carbon ◽  
Water Treatment ◽  
Lower Cost ◽  
Metal Removal ◽  
Tap Water ◽  
Drinking Water Treatment ◽  
Aesthetic Value ◽  
Market Growth ◽  
Inorganic Adsorbents

The demand and market growth of activated carbon (AC) in drinking water treatment have been increasing over the recent years. This is because of the better properties and relatively lower cost of AC compared to inorganic adsorbents like ceramics. However, there have been limited studies on the effects of AC preparation including type of cleansing agent on the adsorption of metal and the turbidity of treated tap water. Therefore, this research investigated the effect of types of cleansing agent and sorbent dosage on turbidity reduction and metal removal in drinking water treatment. The analysis showed that 200 g dosage of AC that has been cleansed with FeCl3 has the turbidity and metal removal improved the most. For aesthetic value of drinking water though, filtration by using AC cleansed with KOH gave better taste and increasing the sorbent dosage up to 300 g increased this performance.

Sign in / Sign up

Export Citation Format

Share Document