scholarly journals 3D Modelling of a Tunnel Re-excavation in Soft Ground

10.14311/1378 ◽  
2011 ◽  
Vol 51 (3) ◽  
Author(s):  
M. Hilar
Keyword(s):  
Ground Improvement ◽  
3D Modelling ◽  
Concrete Lining ◽  
Soft Ground ◽  
Tunnel Face ◽  
Technical Problems ◽  
Support Measures ◽  
Geological Conditions ◽  
Ground Conditions ◽  
Additional Support

The construction of the shallow tunnel at Brezno started using the Pre-Vault Method. The tunnel excavation, in complicated geological conditions, led to many difficulties which finally resulted in a collapse, when a significant part of the temporary tunnel lining collapsed. Various options for re-excavating the tunnel were evaluated prior to further construction. Finally a decision was made to separate the collapsed area into sections 9 m in length using 16 m-wide, transversally oriented pile walls, to improve the stability of the collapsed ground. The walls were constructed from the surface prior to excavation. It was also decided to re-excavate a collapsed area using the Sprayed Concrete Lining (SCL) method. Due to problematic soft ground conditions, which had been made even worse by the collapse, some additional support measures had to be considered prior to re-excavation (ground improvement, micropile umbrellas embedded into the pile walls, etc.)This paper describes numerical modelling of the tunnel re-excavation through the collapsed area. Initial calculations of the tunnel re-excavation were made using a 2D finite element method. Subsequently, further calculations to evaluate the rock mass behaviour in the collapsed area were provided in 3D. The 2D calculations were used to provide sensitivity studies, while 3D modelling was mainly used for evaluating the tunnel face stability (impact of the pile walls, impact of ground improvement) together with other factors (length of advances, moment of the temporary invert closure, etc.) The results of the modelling were compared with the monitoring results.The paper also briefly describes the construction experience (technical problems, performance of various support measures, etc.) The excavation and the primary lining construction were completed in 2006, and the tunnel was opened for traffic in April 2007.

Volume 13 Issue 2 Editorial Note

2019 ◽  
Vol 13 (2) ◽  
Author(s):  
Anne Lemnitzer
Keyword(s):  
Case Studies ◽  
Editorial Note ◽  
Soft Ground ◽  
Research Papers ◽  
Foundation Construction ◽  
Ground Conditions

We are excited to present the work of five excellent author groups who prepared the research papers and case studies featured in this Issue. Three of the five papers deal with piles and the remaining two papers involve foundation construction on soft ground conditions.

scholarly journals Comparison between electrical resistivity tomography and tunnel seismic prediction 303 methods for detecting the water zone ahead of the tunnel face: A case study

2020 ◽  
Vol 12 (1) ◽  
pp. 1094-1104
Author(s):  
Nima Dastanboo ◽  
Xiao-Qing Li ◽  
Hamed Gharibdoost
Keyword(s):  
Electrical Resistivity ◽  
Electrical Resistivity Tomography ◽  
Geological Structure ◽  
Rock Properties ◽  
Electrical Tomography ◽  
Tunnel Face ◽  
Resistivity Tomography ◽  
Geological Conditions ◽  
Seismic Prediction

AbstractIn deep tunnels with hydro-geological conditions, it is paramount to investigate the geological structure of the region before excavating a tunnel; otherwise, unanticipated accidents may cause serious damage and delay the project. The purpose of this study is to investigate the geological properties ahead of a tunnel face using electrical resistivity tomography (ERT) and tunnel seismic prediction (TSP) methods. During construction of the Nosoud Tunnel located in western Iran, ERT and TSP 303 methods were employed to predict geological conditions ahead of the tunnel face. In this article, the results of applying these methods are discussed. In this case, we have compared the results of the ERT method with those of the TSP 303 method. This work utilizes seismic methods and electrical tomography as two geophysical techniques are able to detect rock properties ahead of a tunnel face. This study shows that although the results of these two methods are in good agreement with each other, the results of TSP 303 are more accurate and higher quality. Also, we believe that using another geophysical method, in addition to TSP 303, could be helpful in making decisions in support of excavation, especially in complicated geological conditions.

Construction and operation of batching plants in difficult geological conditions of Upper Kama potash mines

2021 ◽  
pp. 51-56
Author(s):  
V. N. Aptukov ◽  
V. V. Tarasov ◽  
V. S. Pestrikova ◽  
O. V. Ivanov
Keyword(s):  
Crack Opening ◽  
Concrete Lining ◽  
Salt Deposit ◽  
Mine Shaft ◽  
Deformation And Fracture ◽  
Geological Conditions ◽  
Negative Impacts ◽  
Long Term Experience ◽  
Term Maintenance

Scenarios of the component arrangement of batching plants in the system of a vertical mine shaft are discussed. The features of operation of batching plants in vertical shafts of potash mines are identified. The actual recorded damages generated in the lining of batching plants in the course of their longterm operation in potash mines are described. The geomechanical researches aimed to determine vertical convergence in batching rooms of mine shafts, as well as for monitoring of crack opening and displacements in sidewalls in the batching chambers are presented. The major results of the full-scale geomechanical observations are reported, and the main causes of fractures in concrete and reinforced concrete lining at junctures of shafts and batching rooms and shaft bins are identified. The set of the engineering solutions implemented for the protection of lining in batching facilities during construction of mine shafts is described, and its efficiency is evaluated. The mathematical modeling is carried out to estimate various negative impacts on deformation and fracture of concrete lining in shafts with regard to the time factor. From the modeling results, the dominant cause of concrete lining damage in batching chambers and in mine shaft is found. Based on the accomplished research results and actual long-term experience of operation of mine shafts, the most favorable factors are determined for the best design choices in construction and long-term maintenance-free operation of batching plants in potash mines of the Upper Kama Potash–Magnesium Salt Deposit.

Research to build technological procedure for soft ground improvement using sea sand-cement-fly ash column

2020 ◽  
Vol 61 (HTCS6) ◽  
pp. 1-9
Author(s):  
Thinh Duc Ta ◽  
Phuc Dinh Hoang ◽  
Thang Anh Bui ◽  
Trang Huong Thi Ngo ◽  
Diu Thi Nguyen ◽  
...  
Keyword(s):  
Fly Ash ◽  
Load Capacity ◽  
Ground Improvement ◽  
Soft Soil ◽  
Soil Reinforcement ◽  
Soft Ground ◽  
Design Calculation ◽  
Sea Sand ◽  
Composite Ground ◽  
Soft Ground Improvement

Sea sand-cement-fly ash column technology for soft soil treatment is a new technology in the process of completing the theoretical basis, the experimental basis, and the construction of the ground treatment technological procedure. The paper presents the results of scientific research on design, calculation, construction, and acceptance of sea sand-cement-fly ash column. The scientific basis for the design of column is to consider the role of the column in composite ground, that is to use the column as soft ground improvement or soft soil reinforcement. The important parameters for the column design are: cement and fly ash content; column length; column diameter; number of columns; distance among columns; load capacity and settlement of composite ground. The sequence of steps of construction and acceptance of column includes: selection of construction equipment, preparation of construction sites, trial construction, official construction, evaluation of ground quality after treatment and preparation of document for acceptance.

Sign in / Sign up

Export Citation Format

Share Document