Dataset associated with "Can the impacts of cold-water pollution on fish be mitigated by thermal plasticity?"

UQ eSpace ◽  
2020 ◽  
Author(s):  
M. A. Parisi ◽  
R. L. Cramp ◽  
M. A. Gordos ◽  
C. E. Franklin
Keyword(s):  
Water Pollution ◽  
Cold Water ◽  
Thermal Plasticity

scholarly journals Can the impacts of cold-water pollution on fish be mitigated by thermal plasticity?

2020 ◽  
Vol 8 (1) ◽  
Author(s):  
M A Parisi ◽  
R L Cramp ◽  
M A Gordos ◽  
C E Franklin
Keyword(s):  
Water Pollution ◽  
Metabolic Rate ◽  
Water Temperature ◽  
Cold Water ◽  
Thermal Sensitivity ◽  
Exposure Period ◽  
Thermal Pollution ◽  
Locomotor Performance ◽  
Thermal Plasticity ◽  
The Impact

Abstract Increasingly, cold-water pollution (CWP) is being recognised as a significant threat to aquatic communities downstream of large, bottom-release dams. Cold water releases typically occur during summer when storage dams release unseasonably cold and anoxic hypolimnetic waters, which can decrease the temperature of downstream waters by up to 16°C. Depending on the release duration, these hypothermic conditions can persist for many months. The capacity of ectothermic species to tolerate or rapidly adjust to acute temperature changes may determine the nature and magnitude of the impact of CWP on affected species. This study assessed the impacts of an acute reduction in water temperature on the physiological function and locomotor performance of juvenile silver perch (Bidyanus bidyanus) and examined their capacity to thermally compensate for the depressive effects of low temperatures via phenotypic plasticity. Locomotor performance (Ucrit and Usprint) and energetic costs (routine and maximum metabolic rate) were measured at multiple points over a 10-week period following an abrupt 10°C drop in water temperature. We also measured the thermal sensitivity of metabolic enzymes from muscle samples taken from fish following the exposure period. Cold exposure had significant depressive effects on physiological traits, resulting in decreases in performance between 10% and 55%. Although there was partial acclimation of Ucrit (~35% increase in performance) and complete compensation of metabolic rate, this occurred late in the exposure period, meaning silver perch were unable to rapidly compensate for the depressive effects of thermal pollution. The results of this study have substantial implications for the management of cold water releases from large-scale dams and the conservation of native freshwater fish species, as this form of thermal pollution can act as a barrier to fish movement, cause reduced recruitment, ecological community shifts and disruptions to timing and success of reproduction.

Modelling the impact and potential mitigation of cold water pollution on Murray cod populations downstream of Hume Dam, Australia

2007 ◽  
Vol 23 (4) ◽  
pp. 377-389 ◽  
Author(s):  
Bradford Sherman ◽  
Charles R. Todd ◽  
John D. Koehn ◽  
Tom Ryan
Keyword(s):  
Water Pollution ◽  
Cold Water ◽  
Murray Cod ◽  
The Impact

scholarly journals Effects of suboptimal temperatures on larval and juvenile development and otolith morphology in three freshwater fishes: implications for cold water pollution in rivers

2020 ◽  
Vol 103 (12) ◽  
pp. 1527-1540
Author(s):  
Laura E. Michie ◽  
Jason D. Thiem ◽  
Jordan A. Facey ◽  
Craig A. Boys ◽  
David A. Crook ◽  
...  
Keyword(s):  
Water Pollution ◽  
Cold Water ◽  
Freshwater Fishes ◽  
Otolith Morphology ◽  
Juvenile Development

Patient Involvement in Treatment Decision Making Can Help or Hinder Placebo Analgesia

2014 ◽  
Vol 222 (3) ◽  
pp. 165-170 ◽  
Author(s):  
Andrew L. Geers ◽  
Jason P. Rose ◽  
Stephanie L. Fowler ◽  
Jill A. Brown
Keyword(s):  
Patient Involvement ◽  
Cold Water ◽  
Prior Experience ◽  
Water Immersion ◽  
Treatment Decision ◽  
Cold Water Immersion ◽  
Not Given ◽  
Placebo Analgesia ◽  
Treatment Decision Making ◽  
Immersion Experience

Experiments have found that choosing between placebo analgesics can reduce pain more than being assigned a placebo analgesic. Because earlier research has shown prior experience moderates choice effects in other contexts, we tested whether prior experience with a pain stimulus moderates this placebo-choice association. Before a cold water pain task, participants were either told that an inert cream would reduce their pain or they were not told this information. Additionally, participants chose between one of two inert creams for the task or they were not given choice. Importantly, we also measured prior experience with cold water immersion. Individuals with prior cold water immersion experience tended to display greater placebo analgesia when given choice, whereas participants without this experience tended to display greater placebo analgesia without choice. Prior stimulus experience appears to moderate the effect of choice on placebo analgesia.

Operation intensification methods of aggressive industrial sewage neutralization facilities

2020 ◽  
Vol 76 (11) ◽  
pp. 1149-1153
Author(s):  
N. S. Tsarev ◽  
V. I. Aksenov ◽  
I. I. Nichkova
Keyword(s):  
Cold Water ◽  
Specific Productivity ◽  
Technological Properties ◽  
Technological Parameters ◽  
Preliminary Heating ◽  
Sediment Treatment ◽  
Circulating Water ◽  
Equipment Operation ◽  
Sediment Volume ◽  
Industrial Sewage

To neutralize the waste pickling solutions and rinsing water, resulting from cleaning metal products s surface of rust by acids solutions, lime is used. Being cheap, this method of sewage neutralization has considerable drawbacks. Forming in the technological pipes strong gypsum depositions and low specific productivity of the equipment for sediment dewatering are most significant of them. Characteristic of aggressive industrial sewage, formed at pickling of ferrous metals presented. Methods of elimination of drawbacks of industrial sewage neutralization by lime considered, including stabilization of neutralized industrial sewage and control of properties of the sediment formed. It was noted, that stability of the circulating water can be provided by accelerating of crystallization of the forming gypsum sediments by introducing in it fine priming powder and heating the neutralized water up to 65-70 °С followed by thermal softening of a part of circulating water, removed out of the circulating system. It was shown, that the heating of the water and the ongoing changes of the composition and properties of the sediment result in decrease of filtration resistance 2-3 folds, increase of deposition speed 3-4 folds and decrease the sediment volume 1.5-2 folds comparing with lime neutralization in cold water. Calculated dozes of lime at the heating were taken the same as at the regular lime neutralization. Elimination of the circulating water oversaturation by bi-water gypsum can be reached also by addition into the water of powder-like gypsum pulp - priming powder for microcrystals of the gypsum, followed by aeration during 30-40 min. This method was tested under industrial conditions. Technological properties of the forming sediment can be improved by sediment treatment by flocculants and preliminary heating of the neutralized water up to 65-70 °С. Control of technological properties of the sediment is done by addition of flocculants and heating of the neutralized water. Recommendations for improving operation of the neutralization facilities presented with indicating particular technological parameters of the equipment operation for sewage and sediment treatment. 

INFLUENCE THE QUENCHING AND TEMPERING ON THE MICROSTRUCTURE, MECHANICAL PROPERTIES AND SURFACE ROUGHNESS, OF MEDIUM CARBON STEEL

2018 ◽  
Vol 18 (1) ◽  
pp. 125-135
Author(s):  
Sattar H A Alfatlawi
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Surface Roughness ◽  
Carbon Steel ◽  
Cold Water ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Heating And Cooling ◽  
Treatment Processes ◽  
Quenching And Tempering

One of ways to improve properties of materials without changing the product shape toobtain the desired engineering applications is heating and cooling under effect of controlledsequence of heat treatment. The main aim of this study was to investigate the effect ofheating and cooling on the surface roughness, microstructure and some selected propertiessuch as the hardness and impact strength of Medium Carbon Steel which treated at differenttypes of heat treatment processes. Heat treatment achieved in this work was respectively,heating, quenching and tempering. The specimens were heated to 850°C and left for 45minutes inside the furnace as a holding time at that temperature, then quenching process wasperformed in four types of quenching media (still air, cold water (2°C), oil and polymersolution), respectively. Thereafter, the samples were tempered at 200°C, 400°C, and 600°Cwith one hour as a soaking time for each temperature, then were all cooled by still air. Whenthe heat treatment process was completed, the surface roughness, hardness, impact strengthand microstructure tests were performed. The results showed a change and clearimprovement of surface roughness, mechanical properties and microstructure afterquenching was achieved, as well as the change that took place due to the increasingtoughness and ductility by reducing of brittleness of samples.

Spatial analyses reveal conservation benefits for cold-water corals and sponges from small changes in a trawl fishery footprint

2015 ◽  
Vol 528 ◽  
pp. 161-172 ◽  
Author(s):  
CR Lagasse ◽  
A Knudby ◽  
J Curtis ◽  
JL Finney ◽  
SP Cox
Keyword(s):  
Cold Water ◽  
Spatial Analyses ◽  
Trawl Fishery

Predicting cold-water bleaching in corals: role of temperature, and potential integration of light exposure

2020 ◽  
Vol 642 ◽  
pp. 133-146
Author(s):  
PC González-Espinosa ◽  
SD Donner
Keyword(s):  
Coral Bleaching ◽  
Cold Water ◽  
Light Exposure ◽  
Light Attenuation ◽  
Florida Keys ◽  
Cold Temperature ◽  
Warm Water ◽  
Coral Tissue ◽  
Effect Of Temperature ◽  
Type I

Warm-water growth and survival of corals are constrained by a set of environmental conditions such as temperature, light, nutrient levels and salinity. Water temperatures of 1 to 2°C above the usual summer maximum can trigger a phenomenon known as coral bleaching, whereby disruption of the symbiosis between coral and dinoflagellate micro-algae, living within the coral tissue, reveals the white skeleton of coral. Anomalously cold water can also lead to coral bleaching but has been the subject of limited research. Although cold-water bleaching events are less common, they can produce similar impacts on coral reefs as warm-water events. In this study, we explored the effect of temperature and light on the likelihood of cold-water coral bleaching from 1998-2017 using available bleaching observations from the Eastern Tropical Pacific and the Florida Keys. Using satellite-derived sea surface temperature, photosynthetically available radiation and light attenuation data, cold temperature and light exposure metrics were developed and then tested against the bleaching observations using logistic regression. The results show that cold-water bleaching can be best predicted with an accumulated cold-temperature metric, i.e. ‘degree cooling weeks’, analogous to the heat stress metric ‘degree heating weeks’, with high accuracy (90%) and fewer Type I and Type II errors in comparison with other models. Although light, when also considered, improved prediction accuracy, we found that the most reliable framework for cold-water bleaching prediction may be based solely on cold-temperature exposure.

Sign in / Sign up

Export Citation Format

Share Document