scholarly journals Optimization of Substrate and Starter Cell Concentrations for Dibenzothiopene Biodegradation by Indigeneous Marine Bacteria Mauricauda olearia LBF-1-0009, Alcanivorax xenomutants LBF-1-0018, and Stakelama pacifica LBF-1-0031

2018 ◽  
Vol 21 (2) ◽  
pp. 38
Author(s):  
Elvi Yetti ◽  
Ahmad Thontowi ◽  
Yopi Yopi

Dibenzothiophene (DBT) and its derivatives have been widely used as model organic sulfur compounds in petroleum, included their biodegradation process. The abilities of microorganisms to degrade pollutants are significantly influenced by various factors such as microbial species, nutrients and environmental parameters. In this research, we carried out further study to determine optimal condition for DBT biodegradation regarding with substrate and strains cell concentration by several indigenous marine bacteria from Indonesia. These three isolates were belong to Mauricauda olearia, Alcanivorax xenomutants, and Stakelama pacifica, with homology result 99% each. Optimal dibenzothiophene as substrate reached by all isolates is 100 ppm, while cell concentration or microbial numbers that gave highest growth for all isolates is 20 based on conversion of OD600 nm measurement.  

2017 ◽  
Vol 21 (2) ◽  
pp. 38
Author(s):  
Elvi Yetti ◽  
Ahmad Thontowi ◽  
Yopi Yopi

Dibenzothiophene (DBT) and its derivatives have been widely used as model organic sulfur compounds in petroleum, included their biodegradation process. The abilities of microorganisms to degrade pollutants are significantly influenced by various factors such as microbial species, nutrients and environmental parameters. In this research, we carried out further study to determine optimal condition for DBT biodegradation regarding with substrate and strains cell concentration by several indigenous marine bacteria from Indonesia. These three isolates were belong to Mauricauda olearia, Alcanivorax xenomutants, and Stakelama pacifica, with homology result 99% each. Optimal dibenzothiophene as substrate reached by all isolates is 100 ppm, while cell concentration or microbial numbers that gave highest growth for all isolates is 20 based on conversion of OD600 nm measurement.  


2020 ◽  
Vol 20 (4) ◽  
pp. 1264-1270
Author(s):  
Xiang Tu ◽  
Shaohua Chen ◽  
Siyu Wang ◽  
Haiqing Liao ◽  
Xuejiao Deng

Abstract This study investigated the pollution status of volatile organic sulfur compounds (VOSCs) and the factors influencing their spatial distribution in the Xi River in Shenyang, China. A method for simultaneous determination of 14 VOSCs that cause odor in water samples was developed by using purge and trap coupled with gas chromatography and a flame photometric detector. The results indicated that each target compound could be identified from 15 sampling sites, and the total concentration of 14 VOSCs ranged from 2.575 to 52.981 μg L−1. Dimethyl sulfide (DMS) was the most important contaminant with an average concentration of 4.029 μg L−1, a detection rate of 93.33% and a variation coefficient of 0.72. The VOSCs were primarily distributed in suburban and rural sections, and the suburban section was the worst in regard to pollution by VOSCs. Dimethyl trisulfide was primarily distributed in urban and suburban sections of the Xi River due to industrial emissions. Ethanethiol, DMS, and ethyl methyl sulfide, which are typical by-products of microbial anaerobic decomposition from domestic wastewater, were found in abundance in the suburban section. Diethyl sulfide, diethyl disulfide, methyl propyl disulfide, and 1-propyl disulfide representing agricultural nonpoint source pollution were mostly distributed in the rural section.


2017 ◽  
Vol 262 ◽  
pp. 185-188 ◽  
Author(s):  
Alison Cox ◽  
Christopher G. Bryan

Previous agglomerate-scale heap bioleaching studies have outlined the variations in cell numbers of the liquid and attached phases during colonisation of sterilised ore by a pure culture. In this study, a mixed mesophilic culture was used in agglomerate-scale columns containing non-sterilised low-grade copper ore. Over a six - month period, columns were harvested at various intervals to provide snapshots of the metal distribution and the quantity, location, and ecological variations of mineral-oxidizing microbes within the ore bed. The initial colonisation period in this experiment was dissimilar to previous work, as the indigenous community was retained within the ore-bed throughout acid agglomeration. The overall colonisation phase lasted for approximately 1,000 hours until cell concentrations stabilised. In each column, less than 0.05% of the total cells were found in the leachate, 15-20% in the interstitial phase and the remaining ~80% were attached to the mineral surface. Once cell numbers had stabilised, interstitial cell concentrations were approximately 2,000× greater than those in the leachate. This difference persisted for the duration of the experiment. Copper concentrations in the two liquid phases generally decreased over time, but were on average 50× higher in the interstitial phase. Iron concentrations were more stable, but again were 30× higher in the interstitial phase. This demonstrates that that the difference in cell concentration between the leachate and interstitial phases cannot be explained through diffusion gradients within the system as it is much greater than those observed for the dissolved metals. It also shows that the specific environmental conditions of the interstitial and attached cells are very different to those inferred through analysis of leachates alone.


1966 ◽  
Vol 44 (17) ◽  
pp. 2105-2109 ◽  
Author(s):  
R. T. Coutts ◽  
K. W. Hindmarsh ◽  
N. J. Pound

not available


Sign in / Sign up

Export Citation Format

Share Document