scholarly journals Speckle based X-ray wavefront sensing with nanoradian angular sensitivity

2015 ◽  
Vol 23 (18) ◽  
pp. 23310 ◽  
Author(s):  
Hongchang Wang ◽  
Yogesh Kashyap ◽  
Kawal Sawhney
Author(s):  
Walan C. Grizolli ◽  
Xianbo Shi ◽  
Lahsen Assoufid ◽  
Tomasz Kolodziej ◽  
Yuri Shvyd’ko
Keyword(s):  

1998 ◽  
Vol 31 (5) ◽  
pp. 726-732
Author(s):  
C. Medrano ◽  
F. Heyroth ◽  
M. Schlenker ◽  
J. Baruchel ◽  
J. Espeso

The X-ray diffraction topographic imaging process for ferrimagnetic domains in magnetite Fe3O4at room temperature is investigated, in two- and three-beam cases, for incident synchrotron radiation beams differing in angular divergence and energy spread. In the usual two-beam configuration, domain or wall contrast is obtained from the difference in Bragg conditions, or from the slight difference in the direction of the beams diffracted by neighbouring domains, revealed by the large crystal-to-film distance that can be used at a third-generation synchrotron radiation facility. A three-beamUmweganregungcase involving the weak 171 and the strong 131 reflections shows unusual domain contrast on the 171 topographs, even on images involving energy or angle integration; this contrast is particularly evident on white-beam topographs. The high angular sensitivity this implies is associated with the difference in dispersion relation between the two reflections.


2020 ◽  
Vol 27 (2) ◽  
pp. 293-304 ◽  
Author(s):  
Sebastien Berujon ◽  
Ruxandra Cojocaru ◽  
Pierre Piault ◽  
Rafael Celestre ◽  
Thomas Roth ◽  
...  

A parallel paper [Berujon, Cojocaru, Piault, Celestre, Roth, Barrett & Ziegler (2020), J. Synchrotron Rad. 27, 284–292] reviewed theoretically some of the available processing schemes for X-ray wavefront sensing based on random modulation. Shown here are experimental applications of the technique for characterizing both refractive and reflective optical components. These fast and accurate X-ray at-wavelength metrology methods can assist the manufacture of X-ray optics that transport X-ray beams with a minimum amount of wavefront distortion. It is also recalled how such methods can facilitate online optimization of active optics.


2011 ◽  
Author(s):  
Timo T. Saha ◽  
Scott Rohrbach ◽  
William W. Zhang ◽  
Tyler C. Evans ◽  
Melinda Hong

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
Bob Nagler ◽  
Andrew Aquila ◽  
Sébastien Boutet ◽  
Eric C. Galtier ◽  
Akel Hashim ◽  
...  

2016 ◽  
Vol 23 (5) ◽  
pp. 1131-1136 ◽  
Author(s):  
Yogesh Kashyap ◽  
Hongchang Wang ◽  
Kawal Sawhney

A portable device forin situmetrology of synchrotron X-ray mirrors based on the near-field speckle scanning technique has been developed. Ultra-high angular sensitivity is achieved by scanning a piece of abrasive paper or filter membrane in the X-ray beam. In addition to the compact setup and ease of implementation, a user-friendly graphical user interface has been developed to ensure that optimizing active X-ray mirrors is simple and fast. The functionality and feasibility of this device have been demonstrated by characterizing and optimizing X-ray mirrors.


2020 ◽  
Vol 27 (2) ◽  
pp. 254-261 ◽  
Author(s):  
Yanwei Liu ◽  
Matthew Seaberg ◽  
Yiping Feng ◽  
Kenan Li ◽  
Yuantao Ding ◽  
...  

Wavefront sensing at X-ray free-electron lasers is important for quantitatively understanding the fundamental properties of the laser, for aligning X-ray instruments and for conducting scientific experimental analysis. A fractional Talbot wavefront sensor has been developed. This wavefront sensor enables measurements over a wide range of energies, as is common on X-ray instruments, with simplified mechanical requirements and is compatible with the high average power pulses expected in upcoming X-ray free-electron laser upgrades. Single-shot measurements were performed at 500 eV, 1000 eV and 1500 eV at the Linac Coherent Light Source. These measurements were applied to study both mirror alignment and the effects of undulator tapering schemes on source properties. The beamline focal plane position was tracked to an uncertainty of 0.12 mm, and the source location for various undulator tapering schemes to an uncertainty of 1 m, demonstrating excellent sensitivity. These findings pave the way to use the fractional Talbot wavefront sensor as a routine, robust and sensitive tool at X-ray free-electron lasers as well as other high-brightness X-ray sources.


2020 ◽  
Vol 53 (3) ◽  
pp. 760-780
Author(s):  
Andrew J. Morgan ◽  
Harry M. Quiney ◽  
Saša Bajt ◽  
Henry N. Chapman

A method is presented for the measurement of the phase gradient of a wavefront by tracking the relative motion of speckles in projection holograms as a sample is scanned across the wavefront. By removing the need to obtain an undistorted reference image of the sample, this method is suitable for the metrology of highly divergent wavefields. Such wavefields allow for large magnification factors that, according to current imaging capabilities, will allow for nanoradian angular sensitivity and nanoscale sample projection imaging. Both the reconstruction algorithm and the imaging geometry are nearly identical to that of ptychography, except that the sample is placed downstream of the beam focus and that no coherent propagation is explicitly accounted for. Like other X-ray speckle tracking methods, it is robust to low-coherence X-ray sources, making it suitable for laboratory-based X-ray sources. Likewise, it is robust to errors in the registered sample positions, making it suitable for X-ray free-electron laser facilities, where beam-pointing fluctuations can be problematic for wavefront metrology. A modified form of the speckle tracking approximation is also presented, based on a second-order local expansion of the Fresnel integral. This result extends the validity of the speckle tracking approximation and may be useful for similar approaches in the field.


Sign in / Sign up

Export Citation Format

Share Document