High-Heat-Flux Testing of Helium-Cooled Heat Exchangers for Fusion Applications

1996 ◽  
Vol 29 (4) ◽  
pp. 559-570 ◽  
Author(s):  
Dennis L. Youchison ◽  
Michael G. Izenson ◽  
Chandu B. Baxi ◽  
John H. Rosenfeld
Keyword(s):  
Heat Flux ◽  
Heat Exchangers ◽  
High Heat ◽  
High Heat Flux ◽  
Fusion Applications

The Steady-State Modeling and Analysis of a Two-Loop Cooling System for High Heat Flux Removal

2009 ◽  
Author(s):  
Rongliang Zhou ◽  
Juan Catano ◽  
Tiejun Zhang ◽  
John T. Wen ◽  
Greg J. Michna ◽  
...  
Keyword(s):  
Heat Flux ◽  
Steady State ◽  
Heat Exchangers ◽  
Cooling System ◽  
High Heat ◽  
System Structure ◽  
High Heat Flux ◽  
Vapor Compression ◽  
Vapor Compression Cycle ◽  
Compression Cycle

Steady-state modeling and analysis of a two-loop cooling system for high heat flux removal applications are studied. The system structure proposed consists of a primary pumped loop and a vapor compression cycle (VCC) as the secondary loop to which the pumped loop rejects heat. The pumped loop consists of evaporator, condenser, pump, and bladder liquid accumulator. The pumped loop evaporator has direct contact with the heat generating device and CHF must be higher than the imposed heat fluxes to prevent device burnout. The bladder liquid accumulator adjusts the pumped loop pressure level and, hence, the subcooling of the refrigerant to avoid pump cavitation and to achieve high critical heat flux (CHF) in the pumped loop evaporator. The vapor compression cycle of the two-loop cooling system consists of evaporator, liquid accumulator, compressor, condenser and electronic expansion valve. It is coupled with the pumped loop through a fluid-to-fluid heat exchanger that serves as both the vapor compression cycle evaporator and the pumped loop condenser. The liquid accumulator of the vapor compression cycle regulates the cycle active refrigerant charge and provides saturated vapor to the compressor at steady state. The heat exchangers are modeled with the mass, momentum, and energy balance equations. Due to the projected incorporation of microchannels in the pumped loop to enhance the heat transfer in heat sinks, the momentum equation, rarely seen in previous refrigeration system modeling efforts, is included to capture the expected significant microchannel pressure drop witnessed in previous experimental investigations. Electronic expansion valve, compressor, pump, and liquid accumulators are modeled as static components due to their much faster dynamics compared with heat exchangers. The steady-state model can be used for static system design that includes determining the total refrigerant charge in the vapor compression cycle and the pumped loop to accommodate the varying heat load, sizing of various components, and parametric studies to optimize the operating conditions for a given heat load. The effect of pumped loop pressure level, heat exchangers geometries, pumped loop refrigerant selection, and placement of the pump (upstream or downstream of the evaporator) are studied. The two-loop cooling system structure shows both improved coefficient of performance (COP) and CHF overthe single loop vapor compression cycle investigated earlier by authors for high heat flux removal.

Model Predictive Control of a Pumped Two-Phase Cooling System With Microchannel Heat Exchangers

2018 ◽  
Author(s):  
Oyuna Angatkina ◽  
Andrew Alleyne
Keyword(s):  
Heat Flux ◽  
Model Predictive Control ◽  
Predictive Control ◽  
Heat Exchangers ◽  
Cooling System ◽  
High Heat ◽  
High Heat Flux ◽  
Two Phase ◽  
Cooling Systems ◽  
Two Phase Cooling

Two-phase cooling systems provide a viable technology for high–heat flux rejection in electronic systems. They provide high cooling capacity and uniform surface temperature. However, a major restriction of their application is the critical heat flux condition (CHF). This work presents model predictive control (MPC) design for CHF avoidance in two-phase pump driven cooling systems. The system under study includes multiple microchannel heat exchangers in series. The MPC controller performance is compared to the performance of a baseline PI controller. Simulation results show that while both controllers are able to maintain the two-phase cooling system below CHF, MPC has significant reduction in power consumption compared to the baseline controller.

Advanced Micro-Heat Exchangers for High Heat Flux

2007 ◽  
Vol 28 (8-9) ◽  
pp. 788-794 ◽  
Author(s):  
Chien-Yuh Yang ◽  
Chun-Ta Yeh ◽  
Wei-Chi Liu ◽  
Bing-Chwen Yang
Keyword(s):  
Heat Flux ◽  
Heat Exchangers ◽  
High Heat ◽  
High Heat Flux

Numerical Modeling of Chevron Plate Heat Exchangers for Thermal Management Applications

2016 ◽  
Author(s):  
Harsh Tamakuwala ◽  
Ryan Von Ness ◽  
Debjyoti Banerjee
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Heat Exchanger ◽  
Heat Exchangers ◽  
High Heat ◽  
Plate Heat Exchanger ◽  
High Heat Flux ◽  
Plate Heat ◽  
Geometric Conditions ◽  
Swirl Flows

Plate-fin heat exchangers are widely used in industries especially aerospace, cryogenics, food and chemical process industries where high heat flux surface area per unit volume is of prime importance. These heat exchangers consists of series of corrugated plates (herringbone or chevron), separated by gasket sealing. Chevron angled plates are one of the most commonly used type of geometry. The complex design of chevron plate heat exchanger, induces high turbulence and flow reversals causing high heat transfer through the plates. This paper discusses about the computational fluid dynamics simulations conducted over a simplified geometry of Chevron Plate Heat Exchanger to understand the formulation of vortices at different Reynold’s number for various aspect ratios. A single phase laminar flow with periodic boundary condition is used for analysis of the fluid behavior in a unit pattern of the corrugation geometry. Based on different flow and geometric conditions, varying amounts of swirl-flows are observed and different behavior of shear stress and heat transfer plot along the length of the plate is observed. At higher Reynolds numbers (Re), the re-circulations and mixing by the induced vortices causes significant rise of heat flux, with marginal increase in friction factor.

scholarly journals High-Heat-Flux Testing of Irradiated Tungsten-Based Materials for Fusion Applications Using Infrared Plasma Arc Lamps

2014 ◽  
Vol 66 (3) ◽  
pp. 394-404 ◽  
Author(s):  
Adrian S. Sabau ◽  
Evan K. Ohriner ◽  
Jim Kiggans ◽  
Charles R. Schaich ◽  
Yoshio Ueda ◽  
...  
Keyword(s):  
Heat Flux ◽  
High Heat ◽  
High Heat Flux ◽  
Plasma Arc ◽  
Fusion Applications
Sign in / Sign up

Export Citation Format

Share Document