Three-Dimensional Transient Heat, Mass, and Momentum Transfer Model to Predict Conditions of Canola Stored inside Silo Bags under Canadian Prairie Conditions: Part II. Model of Canola Bulk Temperature and Moisture Content

2015 ◽  
pp. 1135-1144
Keyword(s):  
Moisture Content ◽  
Momentum Transfer ◽  
Three Dimensional ◽  
Bulk Temperature ◽  
Transfer Model ◽  
Canadian Prairie

scholarly journals A Proof-of-Concept Algorithm for the Retrieval of Total Column Amount of Trace Gases in a Multi-Dimensional Atmosphere

2021 ◽  
Vol 13 (2) ◽  
pp. 270
Author(s):  
Adrian Doicu ◽  
Dmitry S. Efremenko ◽  
Thomas Trautmann
Keyword(s):  
Trace Gases ◽  
Three Dimensional ◽  
Principal Component ◽  
Radiative Transfer Model ◽  
Computational Time ◽  
Transfer Model ◽  
Proof Of Concept ◽  
Discrete Ordinate ◽  
Distribution Method ◽  
Total Column

An algorithm for the retrieval of total column amount of trace gases in a multi-dimensional atmosphere is designed. The algorithm uses (i) certain differential radiance models with internal and external closures as inversion models, (ii) the iteratively regularized Gauss–Newton method as a regularization tool, and (iii) the spherical harmonics discrete ordinate method (SHDOM) as linearized radiative transfer model. For efficiency reasons, SHDOM is equipped with a spectral acceleration approach that combines the correlated k-distribution method with the principal component analysis. The algorithm is used to retrieve the total column amount of nitrogen for two- and three-dimensional cloudy scenes. Although for three-dimensional geometries, the computational time is high, the main concepts of the algorithm are correct and the retrieval results are accurate.

scholarly journals Mapping barrier island soil moisture using a radiative transfer model of hyperspectral imagery from an unmanned aerial system

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Rehman S. Eon ◽  
Charles M. Bachmann
Keyword(s):  
Soil Moisture ◽  
Radiative Transfer ◽  
Moisture Content ◽  
Layer Thickness ◽  
Soil Moisture Content ◽  
Hyperspectral Imagery ◽  
Barrier Island ◽  
Water Layer ◽  
Radiative Transfer Model ◽  
Transfer Model

AbstractThe advent of remote sensing from unmanned aerial systems (UAS) has opened the door to more affordable and effective methods of imaging and mapping of surface geophysical properties with many important applications in areas such as coastal zone management, ecology, agriculture, and defense. We describe a study to validate and improve soil moisture content retrieval and mapping from hyperspectral imagery collected by a UAS system. Our approach uses a recently developed model known as the multilayer radiative transfer model of soil reflectance (MARMIT). MARMIT partitions contributions due to water and the sediment surface into equivalent but separate layers and describes these layers using an equivalent slab model formalism. The model water layer thickness along with the fraction of wet surface become parameters that must be optimized in a calibration step, with extinction due to water absorption being applied in the model based on equivalent water layer thickness, while transmission and reflection coefficients follow the Fresnel formalism. In this work, we evaluate the model in both field settings, using UAS hyperspectral imagery, and laboratory settings, using hyperspectral spectra obtained with a goniometer. Sediment samples obtained from four different field sites representing disparate environmental settings comprised the laboratory analysis while field validation used hyperspectral UAS imagery and coordinated ground truth obtained on a barrier island shore during field campaigns in 2018 and 2019. Analysis of the most significant wavelengths for retrieval indicate a number of different wavelengths in the short-wave infra-red (SWIR) that provide accurate fits to measured soil moisture content in the laboratory with normalized root mean square error (NRMSE)< 0.145, while independent evaluation from sequestered test data from the hyperspectral UAS imagery obtained during the field campaign obtained an average NRMSE = 0.169 and median NRMSE = 0.152 in a bootstrap analysis.

Use of a membrane module for semi-direct air evaporative cooling

2019 ◽  
Vol 29 (10) ◽  
pp. 1346-1358 ◽  
Author(s):  
Sebastian Englart
Keyword(s):  
Moisture Content ◽  
Relative Error ◽  
Air Temperature ◽  
Evaporative Cooling ◽  
Cross Flow ◽  
Membrane Module ◽  
Transfer Model ◽  
Air Cooling ◽  
Heating Efficiency ◽  
Circulating Water

This study discusses the use of a membrane module for semi-direct evaporative air cooling. A cross-flow membrane module was used to carry out this air treatment process. For such a flow, it was proposed to describe and solve the heat and mass transfer model as a one-dimensional problem. The mathematical model was used to determine the moisture content and air temperature at the outlet from the module and the temperature of the circulating water. Results obtained using the proposed model are in good agreement with the experimental data. The relative error for the air temperature at the module outlet did not exceed 0.5%. For the moisture content, the relative error did not exceed 4%. For the circulating water temperature, the relative error did not exceed 0.6%. This paper also discusses the heating efficiency of the evaporative cooling process. Methods for determining the unit cooling indicator and the energy efficiency ratio are also proposed.

Heat and Mass Diffusion Including Shrinkage and Hygrothermal Stress during Drying of Holed Ceramics Bricks

2011 ◽  
Vol 312-315 ◽  
pp. 971-976 ◽  
Author(s):  
J. Barbosa da Silva ◽  
G. Silva Almeida ◽  
W.C.P. Barbosa de Lima ◽  
Gelmires Araújo Neves ◽  
Antônio Gilson Barbosa de Lima
Keyword(s):  
Moisture Content ◽  
Three Dimensional ◽  
Average Moisture Content ◽  
Stress Distributions ◽  
Drying Process ◽  
Convective Boundary ◽  
Volume Method ◽  
Hygrothermal Stress ◽  
Thermo Physical Properties ◽  
Good Agreement

The Aim of this Work Is to Present a Three-Dimensional Mathematical Modelling to Predict Heat and Mass Transport inside the Industrial Brick with Rectangular Holes during the Drying Including Shrinkage and Hygrothermalelastic Stress Analysis. the Numerical Solution of the Diffusion Equation, Being Used the Finite-Volume Method, Considering Constant Thermo-Physical Properties and Convective Boundary Conditions at the Surface of the Solid, it Is Presented and Analyzed. Results of the Temperature, Moisture Content and Stress Distributions, and Drying and Heating Kinetics Are Shown and Analyzed. Results of the Average Moisture Content and Surface Temperature of the Brick along the Drying Process Are Compared with Experimental Data (T = 80.0oC and RH = 4.6 %) and Good Agreement Was Obtained. it Was Verified that the Largest Temperature, Moisture Content and Stress Gradients Are Located in the Intern and External Vertexes of the Brick.

Modelling of the Development of the Vertical Density Profile of MDF during Hot Pressing

2007 ◽  
Vol 2 (2) ◽  
Author(s):  
Arun Gupta ◽  
Patrick Jordan ◽  
Shusheng Pang
Keyword(s):  
Moisture Content ◽  
Density Profile ◽  
Hot Pressing ◽  
Major Influence ◽  
Transfer Model ◽  
Uniform Density ◽  
Moisture Movement ◽  
Vertical Density Profile ◽  
Vertical Density ◽  
Pressing Operation

The hot pressing operation is one of the most important operations in medium density fibreboard (MDF) manufacture. Complicated dynamic interactions occur during pressing, including heat transfer, moisture movement, development of gas pressure, internal stress development and relaxation, wood consolidation, resin curing, bonding between particles and eventual development of a non-uniform density distribution through the panel thickness. Consequently the mat experiences continuously changing internal conditions (temperature and moisture content) as the pressing operation proceeds. The vertical density profile (VDP) has a major influence on the MDF strength and physical properties. This influence of the VDP on the board properties is generally recognised, but the formation of the density profile and their specific effects on the board performance have proved difficult to quantify. A mathematical model based on theoretical analysis and experimental information is being developed. In the model, the mat is divided into a number of thin parallel layers. The deformation of each layer is a function of stress, temperature and moisture content of the layer. The model incorporates the variation of the mat mechanical and rheological properties with moisture content and temperature. The changes in temperature and moisture content are provided by a separate heat and mass transfer model. The present model can predict stress, strain, layer deformation and density across the thickness during pressing. The performance of the model was validated by experiments conducted in a pilot-scale press. Twelve MDF boards were made with different pressing parameters, and the VDP were measured and compared with the simulation results from the model. The model could predict the density profile with an acceptable accuracy for the main variables that control the manufacturing of MDF boards.

Numerical Study on the Effect of Inner Tube Position on Heat Transfer Process in Self-Recuperative Radiant Tube

2011 ◽  
Vol 228-229 ◽  
pp. 676-680 ◽  
Author(s):  
Ye Tian ◽  
Xun Liang Liu ◽  
Zhi Wen
Keyword(s):  
Heat Transfer ◽  
Transfer Process ◽  
Numerical Study ◽  
Flame Temperature ◽  
Three Dimensional ◽  
Mathematic Model ◽  
Heat Transfer Process ◽  
Bulk Temperature ◽  
Radiant Tube ◽  
Peak Value

A three-dimensional mathematic model is developed for a 100kw single-end recuperative radiant tube and the simulation is performed with the CFD software FLUENT. Also it is used to investigate the effect of distance between combustion chamber exit and inner tube on heat transfer process. The results suggest that the peak value of combustion flame temperature drops along with the increasing of distance, which leads to low NOX discharging. Also radiant tube surface bulk temperature decreases, which causes radiant tube heating performance losses.

Transient Three-Dimensional Heat Transfer Model of a Solar Thermochemical Reactor for H2O and CO2 Splitting via Nonstoichiometric Ceria Redox Cycling

2013 ◽  
Author(s):  
Justin Lapp ◽  
Wojciech Lipiński
Keyword(s):  
Heat Transfer ◽  
Heat Recovery ◽  
Fuel Efficiency ◽  
Three Dimensional ◽  
Reactor Design ◽  
Heat Transfer Model ◽  
Heat Fluxes ◽  
Transfer Model ◽  
Rotating Cylinders ◽  
Solar Receiver

A transient heat transfer model is developed for a solar reactor prototype for H2O and CO2 splitting via two-step non-stoichiometric ceria cycling. Counter-rotating cylinders of reactive and inert materials cycling between high and low temperature zones permit continuous operation and heat recovery. To guide the reactor design a transient three-dimensional heat transfer model is developed based on transient energy conservation, accounting for conduction, convection, radiation, and chemical reactions. The model domain includes the rotating cylinders, a solar receiver cavity, and insulated reactor body. Radiative heat transfer is analyzed using a combination of the Monte Carlo method, Rosseland diffusion approximation, and the net radiation method. Quasi-steady state distributions of temperatures, heat fluxes, and the non-stoichiometric coefficient are reported. Ceria cycles between temperatures of 1708 K and 1376 K. A heat recovery effectiveness of 28% and solar-to-fuel efficiency of 5.2% are predicted for an unoptimized reactor design.

Propagation velocity model of stress waves in larch wood (Larix gmelinii) three-dimensional space with different moisture contents

BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 6680-6695
Author(s):  
Xiwen Wei ◽  
Liping Sun ◽  
Hongjv Zhou ◽  
Yang Yang ◽  
Yifan Wang ◽  
...  
Keyword(s):  
Moisture Content ◽  
Wave Velocity ◽  
Stress Wave ◽  
Propagation Velocity ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Stress Waves ◽  
Moisture Contents ◽  
Direction Angle ◽  
Stress Wave Velocity

Based on the effects of stress wave propagation in larch (Larix gmelinii) wood, the propagation mechanism of stress wave was explored, and a theoretical model of the propagation velocity of stress waves in the three-dimensional space of wood was developed. The cross and longitudinal propagation velocities of stress wave were measured in larch wood under different moisture contents (46% to 87%, 56% to 96%, 20% to 62%, and 11% to 30%) in a laboratory setting. The relationships between the propagation velocity of stress waves and the direction angle or chord angle with different moisture contents were analyzed, and the three-dimensional regression models among four parameters were established. The analysis results indicated that under the same moisture content, stress wave velocity increased as the direction angle increased and decreased as chord angle increased, and the radial velocity was the largest. Under different moisture contents, stress wave velocity gradually decreased as moisture content increased, and the stress wave velocity was more noticeably affected by moisture content when moisture content was below the fiber saturation point (FSP, 30%). The nonlinear regression models of the direction angle, chord angle, moisture content, and the propagation velocity of stress wave fit the experiment data well (R2 ≥ 0.97).

Sign in / Sign up

Export Citation Format

Share Document