scholarly journals The Impact of Historical Gin Stand Technologies on Cotton Fiber and Seed Quality

2019 ◽  
Vol 35 (5) ◽  
pp. 775-785
Author(s):  
Derek P. Whitelock ◽  
Michael D. Buser ◽  
Carlos B. Armijo ◽  
S. Ed Hughs
Keyword(s):  
Seed Quality ◽  
Fiber Quality ◽  
Short Fiber ◽  
Fiber Content ◽  
Seed Damage ◽  
Study Results ◽  
The 1960S ◽  
Design And Manufacture ◽  
The Impact ◽  
Lower Capacity

Abstract. The trend in modern gin stand designs to increase gin stand production rate in terms of bales/h was generally achieved by increased width, narrower saw spacing, and higher saw loading. This study examined fiber length reductions, short fiber content, fiber neps, and cottonseed damage associated with five saw gin stands of differing production rates, design, and manufacture that represent a range of gin technologies developed since the 1960s to identify technologies from those earlier designs that may guide future gin stand research. Based on rated ginning rate, the gin stands were classified in two general categories, lower capacity (LC, 5 bales/h and less) and higher capacity (HC, 7.5 bales/h and higher). Fiber from the LC gin stands contained fewer fiber neps, longer fibers, less short fiber, and less foreign matter than fiber from the HC gin stands. In addition, cottonseed from the gin stand with lowest capacity had the highest residual linters content and the lowest overall seed damage which aligned with the short fiber content data. Both the LC gin stands were older models and had wider saw spacing; the oldest of them was substantially different from the other designs with two saw mandrels pulling fiber from the same seed roll position. Study results indicate that there may be historical gin stand technologies and relationships between gin parameters such as ginning rate per saw, saw spacing, and seed roll density, and fiber and seed quality that need to be further investigated. Keywords: Cottonseed quality, Cotton ginning, Fiber quality, Gin stand, Length, Neps, Short fiber content, Upland cotton.

scholarly journals Impacts of Verticillium Wilt on Photosynthesis Rate, Lint Production, and Fiber Quality of Greenhouse-Grown Cotton (Gossypium hirsutum)

Plants ◽  
2020 ◽  
Vol 9 (7) ◽  
pp. 857
Author(s):  
Addissu G. Ayele ◽  
Terry A. Wheeler ◽  
Jane K. Dever
Keyword(s):  
Verticillium Wilt ◽  
Photosynthetic Rate ◽  
Fiber Quality ◽  
Short Fiber ◽  
Fiber Content ◽  
Photosynthesis Rate ◽  
Breeding Lines ◽  
Fiber Properties ◽  
Cotton Genotypes ◽  
Disease Pressure

Verticillium wilt, caused by Verticillium dahliae Kleb., leads to significant losses in cotton yield and fiber quality worldwide. To investigate Verticillium wilt impact on photosynthesis rate, yield, and fiber quality, six upland cotton genotypes, namely Verticillium susceptible (DP 1612 B2XF) and partially resistant (FM 2484B2F) commercial cultivars and four breeding lines, were grown to maturity under greenhouse conditions in soil either infested or not infested with V. dahliae microsclerotia. Photosynthetic rate, lint, and seed yield were all higher (p < 0.05) for FM 2484B2F than DP 1612 B2XF when infected with V. dahliae. When comparing healthy (H) to Verticillium wilt (VW) affected plants, fiber properties were greatly impacted. Micronaire decreased from 5.0 (H) to 3.6 (VW) with DP 1612 B2XF and 4.4 (H) to 4.1 (VW) with FM 2484B2F. The maturity ratio decreased from 0.90 (H) to 0.83 (VW) for DP 1612 B2XF and was unchanged for FM 2484B2F (0.90). Fiber properties such as short fiber content, nep count, fineness, and immature fiber content were also significantly affected under Verticillium wilt pressure. With Verticillium wilt affected plants, lines 16-13-601V and 17-17-206V performed similarly to FM 2484B2F for photosynthetic rate, yield, and all fiber properties measured. When selecting for improved cultivars in the presence of Verticillium wilt, it is important to select for relatively unchanged fiber properties under disease pressure in addition to reduced disease severity and increased yield.

scholarly journals Use of Pressured-Air for Cotton Lint Cleaning

2019 ◽  
Vol 12 (1) ◽  
pp. 31
Author(s):  
Ruixiu Sui
Keyword(s):  
Cotton Fiber ◽  
Fiber Length ◽  
Fiber Quality ◽  
High Volume ◽  
Short Fiber ◽  
Fiber Content ◽  
Mechanical Contact ◽  
Cotton Lint ◽  
Fiber Properties ◽  
Cotton Fiber Quality

Saw-type lint cleaner (STLC) was most efficient lint cleaner in cotton ginning. However, STLC damaged fiber quality. An air-bar lint cleaner (ABLC) was developed and evaluated to preserve cotton fiber quality. The ABLC used pressurized-air to remove non-lint materials from cotton fiber. During lint cleaning process, non-lint materials attached to the fiber were blown off the fiber without the fiber making aggressive mechanical contact with a grid bar in conventional saw-type lint cleaner (STLC). It was expected using this concept that the fiber quality could be preserved by reducing the damage from mechanical impact of the fiber against the grid bar. Preliminary testing of the ABLC prototype showed that ABLC generated less lint waste and had a higher turnout rate than STLC. Use of ABLC could save 2.8 kg of lint in each 225 kg bale of cotton. The High Volume Instrument (HVI) analysis indicated the fiber properties in fiber length, uniformity, short fiber content, and color were not significantly different between ABLC and STLC. However, the Advanced Fiber Information System (AFIS) tests showed STLC had better performance than ABLC in fiber length and short fiber content while the trash and dust content with ABLC was lower than the STLC. More research was necessary to further prove the concept of ABLC and improve its performance in preserving cotton fiber quality.

Impact of cotton parameters on sensorial comfort of woven fabrics

2020 ◽  
Vol 24 (3) ◽  
pp. 281-302
Author(s):  
Desalegn Atalie ◽  
Gideon Kipchirchir Rotich
Keyword(s):  
Cotton Fiber ◽  
Evaluation System ◽  
Work Performance ◽  
Fiber Strength ◽  
Physical And Mechanical Properties ◽  
Short Fiber ◽  
Woven Fabrics ◽  
Fiber Content ◽  
Content Type ◽  
The Impact

Purpose For cloths having direct contact with the skin, comfort properties are a priority than the physical and mechanical properties. Innerwear clothes should induce pleasant feelings because they have a direct influence on human psychological satisfaction, health and work efficiency. The purpose of this study is to investigate the impact of cotton fiber parameters on the sensorial comfort of woven fabrics. Design/methodology/approach Four types of cotton fiber with different fineness, mean length, uniformity index, short fiber content, strength and elongation were used to develop yarns used to weave fabric samples. Kawabata evaluation system (KES) was used to analyze the fabrics’ sensorial comfort. Findings Results showed that cotton fiber parameters have a significant effect on surface friction and roughness properties. Low stress tensile, tensile resilience and tensile strain properties were affected by fiber micronaire, mean length, uniformity index, short fiber content, fiber strength and elongation. However, fabric shear, bending and compression properties were least dependent on fiber parameters. The correlation of the dependent variable and the independent variable was also statistically analyzed and reported. From the results, it was shown that cotton fiber parameters play a significant role in woven fabrics’ sensorial comfort. Originality/value The cloths that are in contact with the skin can be developed using the results of these studies to feel pleasant. This will, in turn, have a direct effect on the customer's psychological satisfaction, health and work performance.

scholarly journals Improving fiber quality by reducing seed damage in the gin machine

2021 ◽  
Vol 304 ◽  
pp. 03018
Author(s):  
Elmira Mukhametshina ◽  
Rustam Muradov ◽  
Ilkhom Abbazov ◽  
Alisher Usmankulov
Keyword(s):  
Rotation Speed ◽  
Raw Materials ◽  
Fiber Quality ◽  
Scientific Research ◽  
Rotating Disk ◽  
Short Fiber ◽  
Raw Material ◽  
Working Chamber ◽  
Seed Damage ◽  
Factors Influencing

The article focuses on the prevention of seed damage in a gin machine and conducts research on what parameters of the gin machine affect seed damage. Based on the analysis of scientific research in this area, it was established and studied that the density of the raw material roller and its rotation speed, as well as the release of fibers from the working chamber are factors influencing seed damage. Scientific research on the density of raw materials and the acceleration of turnover have been analyzed. Based on the analysis, the acceleration of the rotation of the raw material roller is based on obtaining optimal results, which is carried out using a rotating disk with piles on the side of the working chamber. It is also scientifically proven that the surface of the gutter must be grooved in order to timely remove the seeds separated from the fiber from the working chamber of the gin. Practical studies have shown that as a result of turning the side of the working chamber of the gin machine, the short fiber index in the fiber content decreased by 1.5%, Str-specific tensile strength 0.4 qs / tex and Ehgelongation elongation improved by 0.2%.

The impact of combing and processing parameters on the structure and properties of fine count vortex yarns

2012 ◽  
Vol 83 (4) ◽  
pp. 396-405 ◽  
Author(s):  
N Erdumlu ◽  
W Oxenham ◽  
B Ozipek
Keyword(s):  
Processing Parameters ◽  
Short Fiber ◽  
Fiber Content ◽  
Structure And Properties ◽  
Factors Affecting ◽  
Yarn Properties ◽  
Spun Yarns ◽  
Yarn Count ◽  
Yarn Structure ◽  
The Impact

In this paper, the impact of short fiber content, yarn count and yarn delivery speed on the structure and properties of fine count cotton vortex yarns were investigated. The factors affecting the fine count yarn spinning on a vortex spinning system were determined on the basis of yarn structure and properties by using the linear regression technique. Moreover, the spinning limits of combed cotton vortex spun yarns were investigated. The results of the experiments revealed that the short fiber content in the cotton sliver is an important parameter in spinning fine count vortex spun yarns. The lower short fiber content in the sliver allows finer counts to be spun in the vortex spinning system. It was also observed that yarn delivery speed influences the yarn structure, and hence the yarn properties significantly, since it determines the residence time of the fibers in the yarn formation zone, and also affects the fiber control due to the air flow caused by the surface speed of the delivery rollers. In addition, the structure and properties of vortex spun yarns change significantly with regard to yarn count.

Income Diversification and Bank Efficiency in Vietnam

2017 ◽  
pp. 52-67
Author(s):  
Sang Nguyen Minh
Keyword(s):  
Regression Model ◽  
Commercial Banks ◽  
Banking System ◽  
Operational Efficiency ◽  
Commercial Banking ◽  
Tobit Regression ◽  
Income Diversification ◽  
Positive Effects ◽  
Study Results ◽  
The Impact

This study uses the DEA (Data Envelopment Analysis) method to estimate the technical efficiency index of 34 Vietnamese commercial banks in the period 2007-2015, and then it analyzes the impact of income diversification on the operational efficiency of Vietnamese commercial banks through a censored regression model - the Tobit regression model. Research results indicate that income diversification has positive effects on the operational efficiency of Vietnamese commercial banks in the research period. Based on study results, in this research some recommendations forpolicy are given to enhance the operational efficiency of Vietnam’s commercial banking system.

The ‘Modernisation’ of Scotland and its Impact on Glasgow, 1955–1979: ‘Unwanted Side Effects’ and Vulnerabilities

2016 ◽  
Vol 25 (3) ◽  
pp. 294-316 ◽  
Author(s):  
Chik Collins ◽  
Ian Levitt
Keyword(s):  
Side Effects ◽  
Government Policy ◽  
Regional Policy ◽  
Excess Mortality ◽  
Policy Agenda ◽  
Policy Makers ◽  
Uk Government ◽  
1960S And 1970S ◽  
The 1960S ◽  
The Impact

This article reports findings of research into the far-reaching plan to ‘modernise’ the Scottish economy, which emerged from the mid-late 1950s and was formally adopted by government in the early 1960s. It shows the growing awareness amongst policy-makers from the mid-1960s as to the profoundly deleterious effects the implementation of the plan was having on Glasgow. By 1971 these effects were understood to be substantial with likely severe consequences for the future. Nonetheless, there was no proportionate adjustment to the regional policy which was creating these understood ‘unwanted’ outcomes, even when such was proposed by the Secretary of State for Scotland. After presenting these findings, the paper offers some consideration as to their relevance to the task of accounting for Glasgow's ‘excess mortality’. It is suggested that regional policy can be seen to have contributed to the accumulation of ‘vulnerabilities’, particularly in Glasgow but also more widely in Scotland, during the 1960s and 1970s, and that the impact of the post-1979 UK government policy agenda on these vulnerabilities is likely to have been salient in the increase in ‘excess mortality’ evident in subsequent years.

Some reflections on social structure: Theoretical and practical aspects

2020 ◽  
Vol 18 (6) ◽  
pp. 1063-1078
Author(s):  
T.N. Skorobogatova ◽  
I.Yu. Marakhovskaya
Keyword(s):  
Service Industry ◽  
External Factors ◽  
Infrastructure Development ◽  
Social Infrastructure ◽  
Social Sphere ◽  
The Social ◽  
Study Results ◽  
The Republic ◽  
Internal And External Factors ◽  
The Impact

Subject. This article discusses the role of social infrastructure in the national economy and analyzes the relationship between the notions of Infrastructure, Service Industry and Non-Productive Sphere. Objectives. The article aims to outline a methodology for development of the social infrastructure of Russia's regions. Methods. For the study, we used the methods of statistical and comparative analyses. The Republic of Crimea and Rostov Oblast's social infrastructure development was considered as a case study. Results. The article finds that the level of social infrastructure is determined by a number of internal and external factors. By analyzing and assessing such factors, it is possible to develop promising areas for the social sphere advancement. Conclusions. Assessment and analysis of internal factors largely determined by the region's characteristics, as well as a comprehensive consideration of the impact of external factors will help ensure the competitiveness of the region's economy.

Novel Coronavirus 2019 Outbreak: A Global Epidemic

2020 ◽  
Vol 17 (12) ◽  
pp. 1458-1464
Author(s):  
Sweta Kamboj ◽  
Rohit Kamboj ◽  
Shikha Kamboj ◽  
Kumar Guarve ◽  
Rohit Dutt
Keyword(s):  
World Health ◽  
Upper Respiratory Tract ◽  
Global Epidemic ◽  
The Public ◽  
The Government ◽  
Tract Disease ◽  
The 1960S ◽  
Novel Coronavirus ◽  
Health Organization ◽  
The Impact

Background: In the 1960s, the human coronavirus was designated, which is responsible for the upper respiratory tract disease in children. Back in 2003, mainly 5 new coronaviruses were recognized. This study directly pursues to govern knowledge, attitude and practice of viral and droplet infection isolation safeguard among the researchers during the outbreak of the COVID-19. Introduction: Coronavirus is a proteinaceous and infectious pathogen. It is an etiological agent of severe acute respiratory syndrome (SARS) and the Middle East respiratory syndrome (MERS). Coronavirus, appeared in China from the seafood and poultry market last year, which has spread in various countries, and has caused several deaths. Methods: The literature data has been taken from different search platforms like PubMed, Science Direct, Embase, Web of Science, who.int portal and complied. Results: Corona virology study will be more advanced and outstanding in recent years. COVID-19 epidemic is a threatening reminder not solely for one country but all over the universe. Conclusion: In this review article, we encapsulated the pathogenesis, geographical spread of coronavirus worldwide, also discussed the perspective of diagnosis, effective treatment, and primary recommendations by the World Health Organization, and guidelines of the government to slow down the impact of the virus are also optimistic, efficacious and obliging for the public health. However, it will take a prolonged time in the future to overcome this epidemic.

Effect of Nanobionics in crop production- A Review

2020 ◽  
Vol 10 ◽  
Author(s):  
Vinayak Fasake ◽  
Nita Patil ◽  
Zoya Javed ◽  
Mansi Mishra ◽  
Gyan Tripathi ◽  
...  
Keyword(s):  
Crop Production ◽  
Seed Quality ◽  
Negative Impact ◽  
Potential Solution ◽  
New Era ◽  
Mineral Toxicity ◽  
The Impact ◽  
Favourable Situation ◽  
Unique Chemical ◽  
Macro Nutrients

: Nanobionics involves the improvement of plant or plant productivity using nanomaterials. Growth of a plant from a seed encompasses various factors which are directly or indirectly dependent upon the imbibition of micro and macro nutrients and vital elements from the soil. Since most of the nutrition is physiologically unavailable to the plants, it leads to mineral deficiencies in plant and mineral toxicity in soil. Either ways, it is not a favourable situation for the microcosom. The new era of nanotechnology offers a potential solution to the availability of the nutrients to the plants due to its unique chemical and physical properties of nanoparticles. Positive and negative impact of these nanoparticles on seed quality and plant growth varies according to the specific properties of nanoparticles. The present review is an attempt to summarize the impact of nanobionics in agriculture.

Sign in / Sign up

Export Citation Format

Share Document