A Case Study to Evaluate Field Shape Factors for Estimating Overlap Errors with Manual and Automatic Section Control

2011 ◽  
Vol 54 (4) ◽  
pp. 1237-1243 ◽  
Author(s):  
J. D. Luck ◽  
R. S. Zandonadi ◽  
S. A. Shearer
Keyword(s):  
Shape Factors ◽  
Automatic Section Control

Case Study of Multi-Stage Impeller with Guidevane

2005 ◽  
Author(s):  
Takuji Tsugawa
Keyword(s):  
Velocity Ratio ◽  
Optimum Shape ◽  
Hydraulic Efficiency ◽  
Mixed Flow ◽  
Shape Factors ◽  
Flow Angle ◽  
Multi Stage ◽  
Absolute Flow ◽  
Specific Speed

In the previous paper, the optimum meridian profile of impeller was obtained for various specific speed by means of eight shape factors, that is, inlet relative flow angle β1, turning angle Δβ, axial velocity ratio kc = Cm2/Cm1, impeller diameter ratio kd = D1c/D2c, outlet hub-tip ratio ν2, tip solidity σtimp, mid span solidity σcimp and hub solidity σhimp. In this paper, the optimum meridian profile of multi-stage impeller with guidevane was obtained by means of twelve shape factors. The additional four shape factors are guidevane tip solidity σtgv, mid span solidity σcgv, hub solidity σhgv and coefficient of peripheral velocity at impeller inlet or guidevane outlet kCu1c. In the optimum method, the hydraulic efficiency and suction specific speed are calculated by diffusion factor. In the optimum condition, the best hydraulic efficiency or the best suction specific speed is obtained. In the cyclic flow condition of multi-stage impeller with guidevane, the absolute flow velocity of guidevane outlet is equal to that of impeller inlet, and the diameter of guidevane outlet is equal to that of impeller inlet. In this calculation, the diameter of impeller outlet is equal to that of guidevane inlet. The total calculation number of case study is very large, so the number of each parameter is about between four and seven. The best 1000 optimum meridian profiles and the best design parameter are selected for few kinds of specific speed using twelve dimensional optimum method. As the result of this calculation, the optimum meridian profile of multi-stage impeller and guidevane. The more detailed optimum multi-stage mixed flow impeller and guidevane profile is drawn. For, example, the 1000 specific speed is selected for case study of multi-stage mixed flow impeller. At first, the approximate optimum shape factors are present shape factors. And the optimum shape factors which have better efficiency are tried to find near the present shape factors. Then the study of shape factor changes is the objective of this paper.

Case Study of Impeller Profile Considering Additional Parameters

Volume 3 ◽  
2004 ◽  
Author(s):  
Takuji Tsugawa
Keyword(s):  
Velocity Ratio ◽  
Stream Line ◽  
Mixed Flow ◽  
Shape Factors ◽  
Flow Angle ◽  
Turning Angle ◽  
Calculation Time ◽  
Specific Speed ◽  
Stream Lines

In the previous paper, the optimum meridian profile of impeller was obtained for various specific speed by means of five shape factors. In this paper, the optimum meridian profile of impeller is obtained by means of eight shape factors. The basic five shape factors are inlet relative flow angle β1, turning angle Δβ, axial velocity ratio kc = Cm2/Cm1 impeller diameter ratio kd = D1c/D2c and outlet hub-tip ratio ν2 (β1 and Δβ are in mid span stream surface). The additional three parameters are three stream lines solidity (tip solidity σt, mid span solidity σc, and hub solidity σh). The blade length of impeller meridian profile is able to obtain by additional three parameters. The method of optimization is the calculation of hydraulic efficiency and suction specific speed in all combinations of eight shape parameters. The number of five shape factors are expressed by Nβ1, NΔβ, Nkc, Nkd, Nν2. The number of calculations is expressed by Nβ1 × NΔβ × Nkc × Nkd × Nν2. For example, Nβ1 = NΔβ = Nkc = Nkd = Nν2 = 40, the number of calculations is about 100000000. The calculation time is about 2 hours. The best parameters are selected in 100000000 cases. In case of eight shape factors, the number of calculation is Nβ1 × NΔβ × Nkc × Nkd × Nν2 × Nσt × Nσc × Nσh. Nβ1 = NΔβ = Nkc = Nkd = Nν2 = Nσt = Nσc = Nσh = 10, the number of calculation is 100000000. In this case, the calculation time of eight shape factors is as same as that of five shape factors. By means of this method, the more detailed optimum mixed flow impeller meridian shape is obtained. In case study, the best 1000 optimum meridian profiles and the best design parameter are selected for few kinds of specific speed using eight dimensional optimum method. In the previous paper, the mixed flow angle on tip meridian stream line isn’t able to be decided by this optimization using diffusion factor. But, in this paper, the mixed flow angle is able to be decided by the number of blade and optimum solidity. As the best solidity of three stream lines is obtained, the axial coordinates of impeller inlet and outlet are obtained. The more detailed optimum mixed flow impeller meridian shape is drawn.

Case Study of Tandem Impeller Rotating at Different Speeds

2012 ◽  
Author(s):  
Takuji Tsugawa
Keyword(s):  
Velocity Ratio ◽  
Diameter Ratio ◽  
Design Parameters ◽  
Shape Factors ◽  
Flow Angle ◽  
Turning Angle ◽  
Impeller Outlet ◽  
Calculation Process ◽  
Specific Speed

In previous study, the optimum meridian profile of tandem impeller rotating at the same speed was obtained by means of calculation of efficiency and suction specific speed considering two diffusion factors of tandem impeller. The effect of theoretical head ratio between the first impeller and the second impeller was obtained. In this study, the optimum meridian profile and design parameters of tandem impeller rotating at two kinds of different speed was obtained. In the process of this study, a lot of design parameters were needed. Therefore, in the optimum calculation process the predominant design parameters of two impellers were selected and re-selected. The predominant design parameters were inlet relative flow angle, turning angle, meridian velocity ratio, inlet and outlet diameter ratio and so on. The impeller meridian velocity ratios of shape factors were defined as kc12(= Cm2/Cm1) and kcp2(= Cm2/Cmp), and the impeller diameter ratios were defined as kd12(= D1c/D2c) and kdp2(= Dpc/D2c). The subscripts 1,p and 2 means the first impeller inlet, the second impeller inlet and the second impeller outlet respectively. And theoretical head ratio between first impeller and second impeller was defined as kHth(= Htha/Hthb). The rotational ratio between the first impeller and the second impeller defined as Rna(= na/nb). The Optimum Rna(= na/nb) was effected by the other design parameter. As the result, the optimum meridian profile of tandem impeller rotating at different speeds was obtained. This method can be also used for the suitable rotative guidevane.

The economics of automatic section control technology for planters: A case study of middle and west Tennessee farms

2013 ◽  
Vol 95 ◽  
pp. 1-10 ◽  
Author(s):  
Margarita Velandia ◽  
Michael Buschermohle ◽  
James A. Larson ◽  
Nathanael M. Thompson ◽  
Brandon Michael Jernigan
Keyword(s):  
Control Technology ◽  
West Tennessee ◽  
Automatic Section Control

The Genesis and Internal Dynamics of El Salvador's People's Revolutionary Army, 1970–1976

2014 ◽  
Vol 38 (01) ◽  
pp. 102-129
Author(s):  
ALBERTO MARTÍN ÁLVAREZ ◽  
EUDALD CORTINA ORERO
Keyword(s):  
Latin America ◽  
El Salvador ◽  
Early Years ◽  
Left Wing ◽  
Internal Dynamics ◽  
Internal Coherence ◽  
The 1960S

AbstractUsing interviews with former militants and previously unpublished documents, this article traces the genesis and internal dynamics of the Ejército Revolucionario del Pueblo (People's Revolutionary Army, ERP) in El Salvador during the early years of its existence (1970–6). This period was marked by the inability of the ERP to maintain internal coherence or any consensus on revolutionary strategy, which led to a series of splits and internal fights over control of the organisation. The evidence marshalled in this case study sheds new light on the origins of the armed Salvadorean Left and thus contributes to a wider understanding of the processes of formation and internal dynamics of armed left-wing groups that emerged from the 1960s onwards in Latin America.

Culture and the plasticity of perception

2020 ◽  
Vol 43 ◽  
Author(s):  
Michael Lifshitz ◽  
T. M. Luhrmann
Keyword(s):  
Cultural Context ◽  
Sensory Experience ◽  
Cultural Learning ◽  
The World

Abstract Culture shapes our basic sensory experience of the world. This is particularly striking in the study of religion and psychosis, where we and others have shown that cultural context determines both the structure and content of hallucination-like events. The cultural shaping of hallucinations may provide a rich case-study for linking cultural learning with emerging prediction-based models of perception.

Dual systems for all: Higher-order, role-based relational reasoning as a uniquely derived feature of human cognition

2019 ◽  
Vol 42 ◽  
Author(s):  
Daniel J. Povinelli ◽  
Gabrielle C. Glorioso ◽  
Shannon L. Kuznar ◽  
Mateja Pavlic
Keyword(s):  
Temporal Reasoning ◽  
Higher Order ◽  
Important Case ◽  
Human Cognition ◽  
Relational Reasoning ◽  
Dual Systems ◽  
First Order ◽  
Reasoning System ◽  
Role Based

Abstract Hoerl and McCormack demonstrate that although animals possess a sophisticated temporal updating system, there is no evidence that they also possess a temporal reasoning system. This important case study is directly related to the broader claim that although animals are manifestly capable of first-order (perceptually-based) relational reasoning, they lack the capacity for higher-order, role-based relational reasoning. We argue this distinction applies to all domains of cognition.

Sociocultural memory development research drives new directions in gadgetry science

2019 ◽  
Vol 42 ◽  
Author(s):  
Penny Van Bergen ◽  
John Sutton
Keyword(s):  
Episodic Memory ◽  
Autobiographical Memory ◽  
Developmental Psychology ◽  
Cross Cultural ◽  
Memory Development ◽  
Development Research ◽  
Cultural Research ◽  
New Directions ◽  
Cross Cultural Research

Abstract Sociocultural developmental psychology can drive new directions in gadgetry science. We use autobiographical memory, a compound capacity incorporating episodic memory, as a case study. Autobiographical memory emerges late in development, supported by interactions with parents. Intervention research highlights the causal influence of these interactions, whereas cross-cultural research demonstrates culturally determined diversity. Different patterns of inheritance are discussed.

Construction of plastic contact deformation maps on ceramics: a case study on aluminum nitride

1996 ◽  
Vol 54 ◽  
pp. 636-637
Author(s):  
D. L. Callahan
Keyword(s):  
Plastic Deformation ◽  
Aluminum Nitride ◽  
Mechanical Response ◽  
Three Dimensional ◽  
Bright Field Image ◽  
Perfectly Plastic ◽  
Contrast Analysis ◽  
Deformation Patterns

Modern polishing, precision machining and microindentation techniques allow the processing and mechanical characterization of ceramics at nanometric scales and within entirely plastic deformation regimes. The mechanical response of most ceramics to such highly constrained contact is not predictable from macroscopic properties and the microstructural deformation patterns have proven difficult to characterize by the application of any individual technique. In this study, TEM techniques of contrast analysis and CBED are combined with stereographic analysis to construct a three-dimensional microstructure deformation map of the surface of a perfectly plastic microindentation on macroscopically brittle aluminum nitride.The bright field image in Figure 1 shows a lg Vickers microindentation contained within a single AlN grain far from any boundaries. High densities of dislocations are evident, particularly near facet edges but are not individually resolvable. The prominent bend contours also indicate the severity of plastic deformation. Figure 2 is a selected area diffraction pattern covering the entire indentation area.

Sign in / Sign up

Export Citation Format

Share Document