Temperature Dependence of the Stress Relaxation Behavior of Aqueous Sugar Glasses

1979 ◽  
Vol 22 (2) ◽  
pp. 0445-0448 ◽  
Author(s):  
P. B. McNulty ◽  
D. G. Flynn
Keyword(s):  
Stress Relaxation ◽  
Temperature Dependence ◽  
Relaxation Behavior ◽  
Stress Relaxation Behavior ◽  
Sugar Glasses

The Effect of the Passivation Material on the Stress and Stress Relaxation Behavior of Narrow Al-Si-Cu Lines

1996 ◽  
Vol 436 ◽  
Author(s):  
A. Witvrouw ◽  
P. Flinn ◽  
K. Maex
Keyword(s):  
Stress Relaxation ◽  
Temperature Dependence ◽  
Room Temperature ◽  
Relaxation Behavior ◽  
Storage Test ◽  
Stress Relaxation Behavior ◽  
Passivation Film ◽  
Parallel Lines ◽  
Curvature Measurements ◽  
Substrate Curvature

Abstract800 nm thick and 1μm wide Al-1wt.%Si-0.5wt.% Cu parallel lines with 1 μm spacing were passivated with PECVD oxide, oxynitride or nitride. Substrate curvature measurements as a function of temperature and XRD-measurements at room temperature were used to characterize macroscopic samples of these parallel Al-Si-Cu-lines. By using both techniques the average inplane stresses for the Al-Si-Cu lines as well as for the covering passivation material can be determined as a function of temperature. The highest and lowest stresses in the Al-Si-Cu are observed for lines with nitride and oxide passivations, respectively. Also the number of voids in the lines after a storage test at 250 °C is clearly highest for a nitride passivation and lowest for an oxide passivation.The stress in the passivation itself and its temperature dependence is found to be very different from the stress in a blanket passivation film.

The Effect of the Passivation Material on the Stress and Stress Relaxation Behavior of Narrow Al-Si-Cu Lines

1996 ◽  
Vol 428 ◽  
Author(s):  
A. Witvrouw ◽  
P. Flinn ◽  
K. Maex
Keyword(s):  
Stress Relaxation ◽  
Temperature Dependence ◽  
Room Temperature ◽  
Relaxation Behavior ◽  
Storage Test ◽  
Stress Relaxation Behavior ◽  
Passivation Film ◽  
Parallel Lines ◽  
Curvature Measurements ◽  
Substrate Curvature

Abstract800 nm thick and 1 jim wide Al-lwt.%Si-0.5wt.% Cu parallel lines with I μm spacing were passivated with PECVD oxide, oxynitride or nitride. Substrate curvature measurements as a function of temperature and XRD-measurements at room temperature were used to characterize macroscopic samples of these parallel Al-Si-Cu-lines. By using both techniques the average inplane stresses for the Al-Si-Cu lines as well as for the covering passivation material can be determined as a function of temperature. The highest and lowest stresses in the Al-Si-Cu are observed for lines with nitride and oxide passivations, respectively. Also the number of voids in the lines after a storage test at 250 °C is clearly highest for a nitride passivation and lowest for an oxide passivation.The stress in the passivation itself and its temperature dependence is found to be very different from the stress in a blanket passivation film.

Effects of accelerator type on stress relaxation behavior and network structure of aged natural rubber/chloroprene rubber vulcanizates

2016 ◽  
Vol 49 (5) ◽  
pp. 381-396 ◽  
Author(s):  
Farzad A Nobari Azar ◽  
Murat Şen
Keyword(s):  
Stress Relaxation ◽  
Natural Rubber ◽  
Network Structure ◽  
Structural Changes ◽  
Relaxation Behavior ◽  
Stress Relaxation Behavior ◽  
Rubber Blends ◽  
Chloroprene Rubber ◽  
Weather Changes ◽  
Behavior Network

Natural rubber/chloroprene rubber (NR/CR) blends are among the commonly used rubber blends in industry and continuously are exposed to severe weather changes. To investigate the effects of accelerator type on the network structure and stress relaxation of unaged and aged NR/CE vulcanizates, tetramethyl thiuram disulfide, 2-mercaptobenzothiazole, and diphenyl guanidine accelerators have been chosen to represent fast, moderate, and slow accelerator groups, respectively. Three batches have been prepared with exactly the same components and mixing conditions differing only in accelerator type. Temperatures scanning stress relaxation and pulse nuclear magnetic resonance techniques have been used to reveal the structural changes of differently accelerated rubber blends before and after weathering. Nonoxidative thermal decomposition analyses have been carried out using a thermogravimetric analyzer. Results indicate that there is a strong interdependence between accelerator type and stress relaxation behavior, network structure, cross-linking density, and aging behavior of the blends. Accelerator type also affects decomposition energy of the blends.

scholarly journals Stress-relaxation behavior in gels with ionic and covalent crosslinks

2010 ◽  
Vol 107 (6) ◽  
pp. 063509 ◽  
Author(s):  
Xuanhe Zhao ◽  
Nathaniel Huebsch ◽  
David J. Mooney ◽  
Zhigang Suo
Keyword(s):  
Stress Relaxation ◽  
Relaxation Behavior ◽  
Stress Relaxation Behavior ◽  
Covalent Crosslinks

Reloading Stress Relaxation Behavior Analysis Based on a Creep Model for High Temperature Bolting Steel

2013 ◽  
Vol 328 ◽  
pp. 950-954
Author(s):  
Wei Wei Zhang ◽  
Hong Xu ◽  
Hong Yuan Li
Keyword(s):  
High Temperature ◽  
Stress Relaxation ◽  
Steady State Creep ◽  
Relaxation Behavior ◽  
Creep Model ◽  
National Research Institute ◽  
Time Intervals ◽  
Stress Relaxation Behavior ◽  
Proposed Model ◽  
Good Agreement

An analytical method based on a creep model is being developed to investigate the effect of retightening on stress relaxation behavior for high-temperature turbine and valve studs/bolts. In order to validate the approach, the calculated results are compared to the results of uniaxial reloading stress relaxation testing, which were performed by the National Research Institute for Metals of Japan (NRIM) for 12Cr-1Mo-1W-1/4V stainless steel bolting material at 550°C. It was shown that the proposed model based on Altenbach-Gorash-Naumenko creep model for the primary and steady state creep could be applied for the present data. The calculated residual stresses versus time curves were in good agreement with the measured for initial stress level of 273.6MPa at 550°C and for specific reloading time intervals of 24, 72, 240, and 720 hours.

Long-term stress relaxation behavior of Polyaniline-EPDM blends using the time-temperature-strain superposition method

2018 ◽  
Vol 6 (2) ◽  
pp. 025318 ◽  
Author(s):  
Muhammad Shafiq Irfan ◽  
Yasir Qayyum Gill ◽  
Motahira Hashmi ◽  
Sana Ullah ◽  
Farhan Saeed ◽  
...  
Keyword(s):  
Stress Relaxation ◽  
Relaxation Behavior ◽  
Superposition Method ◽  
Stress Relaxation Behavior ◽  
Temperature Strain
Sign in / Sign up

Export Citation Format

Share Document