Effects of Moisture Content and Soil Additions on Physical Properties and Transport Phenomena for Compost Windrow Design

2007 ◽  
Author(s):  
Alexandra C Srebro ◽  
Krystyna A Malinska ◽  
Eric D White ◽  
Joseph M Perez ◽  
Tom L Richard
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Transport Phenomena

Measuring the Thermo-Technical Parameters of Autoclaved Aerated Concrete

2016 ◽  
Vol 824 ◽  
pp. 100-107 ◽  
Author(s):  
Alena Struhárová
Keyword(s):  
Thermal Conductivity ◽  
Moisture Content ◽  
Physical Properties ◽  
Bulk Density ◽  
Capillary Absorption ◽  
Measuring Device ◽  
Technical Parameters ◽  
Autoclaved Aerated Concrete ◽  
Aerated Concrete ◽  
Technical Properties

Bulk density and moisture content are factors that significantly affect the physical properties of autoclaved aerated concrete (AAC) including thermal conductivity and other thermo-technical characteristics. This article shows the results of measurements of compressive strength, capillary absorption, water absorption and porosity of AAC (ash on fluidized fly ash) at different bulk density and also the results of thermal conductivity of AAC at different bulk density and variable moisture content of the material. The thermo-technical properties were measured using the Isomet 2104, a portable measuring device. Acquired results demonstrate dependence of physical properties including thermal conductivity of AAC on bulk density and moisture content. The reliability and accuracy of the method of measuring was also shown.

scholarly journals Pengaruh Penambahan Abu Arang Tempurung Kelapa Pada Tanah Lempung Terhadap Hasil Uji Kompaksi

2021 ◽  
Vol 3 (2) ◽  
pp. 276-285
Author(s):  
Brigita Suzanna ◽  
Irwan Lie Keng Wong ◽  
Monika Datu Mirring Palinggi
Keyword(s):  
Specific Gravity ◽  
Moisture Content ◽  
Physical Properties ◽  
Clay Soil ◽  
Test Method ◽  
Coconut Shell ◽  
Dry Density ◽  
Coconut Shell Ash ◽  
American Society ◽  
Index Value

The purpose of this research is to determine the physical properties of clay soil and to analyze the effect of adding coconut shell charcoal ash to the clay soil. The soil samples used in this study came from Tanralili District, Maros Regency, two sample points were taken and the variations in the levels of addition of coconut shell charcoal ash is 0%, 4%, 6%, 8%, 10%. The test method used refers to ASTM (American Society for Testing Materials). The tests carried out were testing the physical properties of the soil in the form of moisture content, specific gravity, Atterberg boundaries, filter analysis, and hydrometer analysis, then a compaction test was carried out to determine the maximum soil density. The results of the test obtained a moisture content value of 28.811%, a specific gravity of 2.58 g / cm3 so that it is classified as organic clay. As well as the plasticity index value of 9.926% with moderate plasticity from the 7% -17% interval. Then from the test results of soil compaction testing with the addition of coconut shell ash, the dry density (gdry) equal to 0.862, 0.886, 0.914, 0.943, 0.962, this means that the soil sample experienced an increase in dry density (gdry) of 11.60%. From the research results it can be concluded that the addition of coconut shell charcoal ash can increase the value of soil dry density so that it can be used to increase the value of the carrying capacity of clay soil.

scholarly journals Physical properties of sessile oak (quercus petraea l) used by the wood industry in Kosovo

2020 ◽  
Vol 2 (7) ◽  
pp. 278-285
Author(s):  
Rrahim Sejdiu ◽  
Florit Hoxha ◽  
Bujar Jashari ◽  
Lulzim Idrizi
Keyword(s):  
Specific Gravity ◽  
Moisture Content ◽  
Physical Properties ◽  
Radial Direction ◽  
Tangential Direction ◽  
Quercus Petraea ◽  
Sessile Oak ◽  
Content Ratio ◽  
Wet Condition ◽  
Shrinkage Coefficient

The paper shows some physical properties of sessile oak obtained in Kosovo regions. In the study are shown: wood shrinkage, specific gravity, shrinkage coefficient for 1% change of moisture content, ratio of shrinkage in tangential and radial direction etc. The amount of volumetric shrinkage of sessile oak is 15.95%, heartwood part has an average shrinkage 15.41% in The shrinkage of sapwood part is 17.56%. Specific gravity at: wet condition: (1.013gr/cm3); 12% (0.853gr/cm3) and 0% (0.826gr/cm3) of moisture content. Specific gravity of heartwood at: wet condition (1.05gr/cm3); 12% (0.88gr/cm3); 0% (0.85gr/cm3). The specific gravity of sapwood at: wet condition (0.91gr/cm3); 12% (0.77gr/cm3); 0% (0.748gr/cm3). The ratio of average shrinkage between tangential and radial cutting direction is 1.71%. This ratio was significantly higher in sapwood than heartwood. Coefficient of shrinkage (changing 1% of moisture content) in the radial direction is 0.00196, and 0.00323 in tangential direction.  

scholarly journals Characteristics of Oil Used in Frying Peanuts, Cassava And Mackarel Tuna

2021 ◽  
Vol 2 (01) ◽  
pp. 50-62
Author(s):  
Aprialis Aprialis ◽  
Anwar Kasim ◽  
Rini Rini
Keyword(s):  
Fatty Acids ◽  
Fatty Acid ◽  
Moisture Content ◽  
Physical Properties ◽  
Fatty Acid Profile ◽  
Frying Oil ◽  
Chemical Components ◽  
Used Frying Oil ◽  
Cooking Oil ◽  
Used Cooking Oil

The characteristics of used frying oil that are carried out repeatedly using high temperatures and with various types of frying materials will produce new types of oil characteristics, either the appearance and disappearance of certain types of chemical components or changes in the physical properties of frying oil. This study aims to determine the characteristics of cooking oil used in frying peanuts which have high fat content, high carbohydrate content of cassava and mackarel tuna which have high protein content. Samples of used oil were obtained from the use of pure oil from palm oil and then the 3 different types of material were fried with 10 frying repetitions. The used frying oil was then visually observed and analyzed for the number of peroxides, free fatty acids, and moisture content, color test, amount of oil lost and its fatty acid profile. In addition, the amount of oil lost due to frying was observed. The results of the observation of physical properties showed that the smell of oil became rancid, the taste of the oil became bitter and the color turned black. The results of chemical analysis showed that the highest peroxide number was 50 meq / kg, the highest ALB was 4.35%, and the highest moisture content was 3.21% , the oil color changed to brown to black, the highest amount of oil lost due to frying was cassava frying oil. namely 58.4% , . The fatty acid profile of used frying oil has been obtained and there is a decrease in the percentage, the appearance of stearic acid and the loss of heptadecanoic fatty acids in the used cooking oil for peanuts, cassava and mackarel tuna.

scholarly journals Processing of Wild Sunflower with Different Moisture Contents into Solid Bio Fuel

2021 ◽  
pp. 1-9
Author(s):  
Fabie T. Dummapi ◽  
Jacqueline I. Liniasan ◽  
Marvin T. Valentin ◽  
Milagros B. Onalan ◽  
Leonardo D. Dumalhin ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Moisture Content ◽  
Physical Properties ◽  
Ignition Time ◽  
Volume Density ◽  
Ash Content ◽  
Burning Time ◽  
Wild Sunflower ◽  
Average Mass ◽  
Moisture Contents

Wild sunflower with moisture contents of 16%, 12% and 8% was densified without the addition of binding agent. The physical properties of the formed briquettes such as mass, dimensions, volume, density and shattering resistance were evaluated. Thermal properties like ignition time, burning time, ash content, and thermal fuel efficiency by means of boiling test were also evaluated. Wild Sunflower stems were gathered and shredded using locally fabricated biomass shredder available at the Research Office of Benguet State University, and were processed into the desired size and moisture contents. Right after the briquetting operation, the physical properties of the briquette were measured and then stored in a zip bag for 24 hours. After the storage, same measurement was conducted. Results show that the influence of moisture contents on the average mass, dimension, shattering resistance, volume and density was statistically insignificant. The wild sunflower with moisture content of 16% had the highest shattering resistance of 88.85%. Furthermore, the influence of moisture content on the thermal properties like ignition time, burning time and ash content are statistically insignificant. Among the moisture contents, the fastest ignition time of 43.75 sec with longest burning time was recorded under 12%. Ash content was also lowest at 12%.

scholarly journals Nahrwan Clays Study for Brick Industry

2008 ◽  
Vol 5 (4) ◽  
pp. 538-544
Author(s):  
Baghdad Science Journal
Keyword(s):  
Compressive Strength ◽  
Chemical Analysis ◽  
Moisture Content ◽  
Physical Properties ◽  
Clay Brick ◽  
Quaternary Sediment ◽  
Physical Test ◽  
Class A ◽  
Clay Deposits ◽  
Depth Ranges

Nahrawan clay deposits lies in Diyala governorate , 65 Km, NE of Baghdad , according to the previous work in this field, in which they study the reserve belong to category of investigation ( C2 & C1 ) , we choice the proper area to investigation of category (B) with drill net( 200x 200m ) to rise the amount of reserve. The investigation work included drilling (116) boreholes of total depth ranges from (10.0-12.55m) , showed mainly clayey and silty deposits with little sand , and the typical borehole (648) represents all types of sediment in the area , and most of boreholes without sandy deposits , and all of these deposits is Quaternary sediment which is consist of two main sedimentary cycles ( the Pleistocene & Holocene ) . Chemical analysis for (343) samples were done , and physical test carried on ( 143 ) samples , and all show suitable properties for clay brick industry . the area of investigation covered ( 5.200.000 m2) involving ( 620.000 m2 ) containing soluble salt more than ( 3.5%) , which was separated from the total area , so the residual (4.580.000m2 ) had been taken to calculate the reserve , with depth of ( 10.76m) for the industrial clay bed . The reserve calculations depended on the following chemical & physical Properties: The chemical analysis shows that , CaO ( 16.53%) MgO ( 4.65% ) , SO3 ( 1.42%) , T.S.S. (2.42%) , the physical properties are unfired properties Which contains Bulk density ( 2.09gm/cm3) , moisture content (20.95%) , linear dry shri. (7.63%) , and fired properties which contain water absorption (18.8%) , linear shri. (0.8%) volume shri. (2.212% ) , compressive strength ( 468.606Kg/cm2) . So the reserve of category (B) is ( 49.280. 800 m3 ) or (102.966.000 Ton) the physical test showed that the brick classified into class (A-B) .

Analysis of the physcial properties of particleboard from a mixture of cocoa pod peel powder and styrofoam

2021 ◽  
Vol 5 (1) ◽  
pp. 7
Author(s):  
Ety Jumiati ◽  
Endang Sagita Ritonga ◽  
Abdul Halim Daulay
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Epoxy Resin ◽  
Powder Mixture ◽  
Surface Shape ◽  
Particle Board ◽  
Hot Press ◽  
Resin Adhesive ◽  
Cocoa Pod Husk ◽  
Epoxy Resin Adhesive

<p><strong><em>Abstract</em></strong><strong></strong></p><p><strong><em>Abstract. This study aims to determine the effect of optimal physical properties and microstructure on particleboard samples. The percentage variations of cocoa pod peel powder mixture, styrofoam with epoxy resin adhesive were sample A (69:0:30), sample B (68:2:30), sample C (67:3:30), and sample D (66:4:30). 6:30). The materials were compressed were a hot press and a conditioning time of 14 days. sThe most optimum particleboard sample was found in sample B with values of density, moisture content, and thickness expansion, respectively 0,80 g/cm</em></strong><strong><em><sup>2</sup></em></strong><strong><em>, 7,74%, and 9,32%, and met the standards of SNI 03-2105- 2006. The surface shape of the particle board morphology in sample B shows the composition of the material with the adhesive binding optimally so that there are very few empty spaces or cavities.</em></strong><strong></strong></p><h1 align="center"><em> </em></h1><p><strong><em>Keywords:</em></strong><em> cocoa pod husk powder, styrofoam, particle board, epoxy resin.</em></p>

Sign in / Sign up

Export Citation Format

Share Document