scholarly journals Realization of the Similarity Law in the Building Material Science

2019 ◽  
Vol 35 (3) ◽  
pp. 1067-1072 ◽  
Author(s):  
Lesovik Valery Stanislavovich ◽  
Tolstoy Aleksandr Dmitrievich ◽  
Glagolev Evgeniy Sergeevich ◽  
Ahmed Anees Al-ani ◽  
Aimenov Zhambul Talhaevich ◽  
...  
Keyword(s):  
Building Materials ◽  
Deformation Characteristic ◽  
Deformation Characteristics ◽  
High Adhesion ◽  
Powder Composites ◽  
Law Of Similarity ◽  
Expansion Coefficients ◽  
Similarity Law

The need for high quality of building products and structures determines the urgency of creating new ways to control the processes of forming the internal structure of modern composite building materials. This article discusses some aspects and problems on designing high-powder composites based on the law of similarity. The results showed that the determination of the compositions of these materisls and high adhesion property to each other and a low deformation characteristic. The results demonstrated that this less deformation characteristics is due to the similarity of the thermai expansion coefficients of the concrete components.

scholarly journals EXPERT RESEARCH ON QUALITY DETERMINATION OF ENTRANCE METAL DOORS

2018 ◽  
Vol 18 ◽  
pp. 428-434
Author(s):  
N. A. Matsak ◽  
S. A. Kirilenko ◽  
O. O. Posashkov
Keyword(s):  
Building Materials ◽  
Sound Insulation ◽  
Technical Documentation ◽  
Important Place ◽  
Technical Examination ◽  
Long Time ◽  
Technical Features ◽  
And Storage

The article outlines the mandatory quality requirements for manufactured and installed metal entrance shockproof doors, which should ensure the safety of life, health and property of citizens. The main technical features of these designs and their characteristics are presented. The problem of quality control is considered, since quality is a guarantee of reliability and a guarantee that doors will serve for a long time and reliably. The installation of high-quality "armored" doors will not only protect housing from unauthorized penetration, but also help to isolate the premise from the external environment; therefore in the problem of selecting entrance metal doors, an important place is occupied by the issue of heat and sound insulation. While choosing a good metal door, every detail should be taken into account. The quality of the goods and safety of the premise directly depend on all design components. The article raises such a topical issue as the establishment of quality works on manufacture, storage, transportation and mounting of entrance metal shockproof doors while performing forensic construction and technical examination. The technical characteristics of building materials that can be used in this case are presented. The authors also pointed out that it is very important to resolve disputes on this type of researches, so this is the availability of technical documentation. All data about the product should be included in this documentation up to the information on transportation and storage, since this information will much facilitate the work of experts in the future. After all, the establishment of the quality of this type of products is a fairly complex and time-consuming process. While determining the quality, all details are important, starting from the quality of the used building materials, the works on manufacturing of the door blocks, their storage and transportation conditions, and finishing the placing (mounting).

Tingkat Pemahaman Kompetensi Guru Pada Mahasiswa Pendidikan Geografi Sebagai Calon Guru Geografi

2020 ◽  
Vol 21 (1) ◽  
pp. 102-117
Author(s):  
Novia Zalmita ◽  
Muhajirah Muhajirah ◽  
Abdul Wahab Abdi
Keyword(s):  
Prospective Teachers ◽  
Prospective Teacher ◽  
Quantitative Description ◽  
Population Data ◽  
Geography Education ◽  
Teacher Competence ◽  
Education Department ◽  
Long Time

One that influences human resource indicators is education. The teacher is a profession as a job of academic specialization in a relatively long time in college. Understanding related to teacher competence is very important to have by a prospective teacher because it can affect the quality of performance as a professional teacher. The teacher's competence is known as pedagogic, professional, social and personality competencies. The issue in this study is how the competency of the teacher of the Department of Geography Education FKIP Unsyiah as a prospective teacher of geography? The purpose of this study was to determine the competence of teachers in the Department of Geography Education FKIP Unsyiah as prospective geography teachers. Quantitative description approach is used in this study to find answers to the issue. The population in this study were students of the Department of Geography Education FKIP Unsyiah class of 2015 and 2016 who had been declared to have passed the Micro Teaching and Magang Kependidikan 3 course totaling 50 people. Because the population is small and can be reached, the determination of the sample using total sampling techniques so that the sample in this study is the whole population. Data collection is done by distributing test questions to respondents. The data was analyzed using the descriptive statistics percentage formula. The results of the study indicate that the level of teacher competence of Geography Education Department students as prospective teachers is in the moderate category, namely as many as 22 respondents (44%). A total of 12 respondents (24%) were in the high category, 15 respondents (30%) were in the low category and 1 respondent (2%) were in the very low category.

Fluctuations of Annual Precipitation and Water Resources Quality in Ukraine

2016 ◽  
Vol 10 (4s) ◽  
pp. 621-629
Author(s):  
Valentina Pidlisnyuk ◽  
◽  
John Harrington JR ◽  
Yulia Melnyk ◽  
Yuliya Vystavna ◽  
...  
Keyword(s):  
Water Resources ◽  
Surface Waters ◽  
Precipitation Amount ◽  
Ion Concentration ◽  
Annual Precipitation ◽  
Resource Quality ◽  
Phosphate Ion ◽  
Regional Trends

The article focuses on examining the influence of fluctuations in annual precipitation amount on the quality of surface waters. Water quality was estimated with data on BOD, COD and phosphate–ion concentration within five selected regions of Ukraine. Analysis of the precipitation data (1991 – 2010) showed different regional trends. Using the statistics, determination of the interconnection between precipitation amount and water resources quality were done. The obtained regularities and associated uncertainties can be used for prediction of changes in water resource quality and as a guide for future adaptation to possible climate change.

POTENSI PENGEMBANGAN SADE SEBAGAI DESA WISATA LOMBOK

2016 ◽  
Vol 20 (2) ◽  
pp. 69-82
Author(s):  
W. Suprihatin ◽  
H. Hailuddin
Keyword(s):  
Analytical Hierarchy Process ◽  
Environmental Aspect ◽  
Priority Level ◽  
Highest Weight ◽  
Local Tradition ◽  
Tourist Village ◽  
Hierarchy Process ◽  
Initial Pattern

The background of the problems in this study is the decreasing quality of Sade hamlet amid rising tourist arrivals. From the environmental aspect, the conditions of the hamlet began to decline, in which the initial pattern of Sade has started a lot of changes towards the deficient and began to leave the local tradition. One effort to improve the condition of Sade hamlet in social, cultural and the environmental aspect is through the formulation of a sustainable structuring, the presence and identity maintaining and making a sustainable Tourism Village. Through analysis of AHP (Analytical Hierarchy Process) by collecting the perceptions of some experts through interviews and questionnaires, obtained by weighting the priority of the experts, namely the preservation of culture as an element of priority-level goals to be achieved in the development of Sade Hamlet as a tourist village at 0,476. While the determination of the level of the main criteria in the achievement of these objectives is the highest weight while maintaining a typical village environment at 0.319. Priority strategies that get the highest weight of the experts is that Sade Hamlet Revitalization with a priority weighting of 0.583. The second priority is the relocation of Hamlet at 0.235. Lowest weighting or last priority is Replication Sade Hamlet at 0.182.

Automation of selected brazes' dynamic properties in high-temperatures' measurement process

2013 ◽  
Vol 18 (2-3) ◽  
pp. 33-41
Author(s):  
Dominik Sankowski ◽  
Marcin Bakala ◽  
Rafał Wojciechowski
Keyword(s):  
Surface Tension ◽  
High Temperatures ◽  
Dynamic Properties ◽  
Automatic Measurement ◽  
Measurement Methodology ◽  
Joining Process ◽  
Wetting Force ◽  
Research Grant

Abstract The good quality of several manufactured components frequently depends on solidliquid interactions existing during processing. Nowadays, the research in material engineering focuses also on modern, automatic measurement methods of joining process properties, i.a. wetting force and surface tension, which allows for quantitative determination of above mentioned parameters. In the paper, the brazes’ dynamic properties in high-temperatures’ measurement methodology and the stand for automatic determination of braze’s properties, constructed and implmented within the research grant nr KBN N N519 441 839 - An integrated platform for automatic measurement of wettability and surface tension of solders at high temperatures, are widely described

X-ray fluorescence determination of zinc sulfate in acidic zinc plating electrolyte

2020 ◽  
Vol 86 (10) ◽  
pp. 18-22
Author(s):  
K. N. Vdovin ◽  
K. G. Pivovarova ◽  
N. A. Feoktistov ◽  
T. B. Ponamareva
Keyword(s):  
Zinc Sulfate ◽  
Zinc Coating ◽  
Electrolyte Composition ◽  
Complexometric Titration ◽  
X Ray ◽  
Fluorescence Determination ◽  
Zinc Plating ◽  
Zinc Determination

Zinc sulfate is the main component in the composition of the acidic zinc plating electrolyte. Deviation in the electrolyte composition from the optimum content leads to destabilization of the electrolysis process and deteriorate the quality of the resulting zinc coating. The proper quality of a zinc coating obtained by galvanic deposition can be ensured only with timely monitoring and adjustment of the electrolyte composition. A technique of X-ray fluorescence determination of zinc (in terms of zinc sulfate) in an acidic zinc plating electrolyte is proposed. The study was carried out using an ARL Quant’X energy dispersive spectrometer (Thermo Fisher Scientific, USA) with a semiconductor silicon-lithium detector. The features of the spectrometer design are presented. The optimal parameters of excitation and detection of zinc radiation were specified when the electrolyte sample was diluted 1:1000. The ZnKα1 line was used as an analytical line. The plotted calibration graph is linear, the correlation coefficient being 0.999234. The results of zinc determination according to the developed method were compared with the data of the reference method of complexometric titration to prove the reliability of the procedure. The results are characterized by good convergence and accuracy. The proposed method of X-ray fluorescence zinc determination in a zinc plating electrolyte equals complexometric titration in the limiting capabilities and even exceeds the latter in terms of the simplicity of sample preparation and rapidity. The developed method of X-ray fluorescence determination of zinc is implemented in analysis of the electrolyte used in the continuous galvanizing unit at «METSERVIS LLC».

INFLUENCE OF DICARBOXYLIC ACIDS ON SOWING QUALITY OF SPRING BARLEY

1970 ◽  
pp. 22-25
Author(s):  
N. N. Loy ◽  
S. N. Gulina
Keyword(s):  
Organic Acids ◽  
Spring Barley ◽  
Dose Range ◽  
Dicarboxylic Acids ◽  
Rotary Machine ◽  
Working Solution ◽  
Negative Effect ◽  
Sprouted Seeds

The effect of presowing seed treatment on various concentrations of dicarboxylic (organic) acids on the sowing characteristics of spring barley has been studied. Seeds were treated with organic acids obtained by exposing cuttings to the radiation with a dose of 100 kGy and consequent hydrolysis, in concentrations: 1•10-7 %; 1•10-9; 1•10-11; 1•10-13 and 1•10-15 % on a laboratory rotary machine RVO-64 for one day before laying for germination. Distilled water was used for the control case. The rate of application of the working solution calculated as 10 liters / ton of seeds. Seeds were germinated in filter paper rolls in accordance with GOST 12038-84 requirements. The temperature was maintained at +24 ° C in the thermostat where the glasses with rolls were placed. For determination of germinative power and laboratory germination the sprouted seeds were evaluated after three and seven days, respectively. In laboratory experiments it was established that the treatment of barley seeds of varieties Zazersky 85, Nur and Vladimir with organic acids (OK) in different concentrations had both a stimulating and a negative effect. On the Zazersky 85 variety, in variants with acid concentrations of 1•10-9 and 1•10-11, an increase in germination energy (EP) by 2-4% and a significant decrease (by 3-4%) of laboratory germination (LV) of barley seeds were noted. On the Nur variety, the increase in EP was observed at 4% (concentration 1•10-11), LV and seed growth force (CPC) by 2-7% at a concentration of 1•10-7 and in the dose range 1•10-11 - 1•10-14 compared to the control values. On the grade of Vladimir, an increase in EP, LV, and CPC was found to increase by 1-6% at concentrations OK 1•10-7 and 1•10-13. It was shown that the treatment of seeds with acids led to an increase in the length of the germ in all studied varieties (by 3-9%) and dry biomass of 7-day-old seedlings - by 3-6%. Consequently, the treatment of seeds with a mixture of dicarboxylic acids has a stimulating effect on the sowing quality of spring barley.

Sign in / Sign up

Export Citation Format

Share Document