scholarly journals A Comparitive Study on the Tensile Bond Strength of Conventional Denture Base Resin to Cross Linked Acrylic Tooth Using two Different Curing Cycles: An Invitro Study

2017 ◽  
Vol 10 (1) ◽  
pp. 447-454
Author(s):  
Raza Mohamed ◽  
Noufal P. K ◽  
Deepa Shenoy ◽  
P. Sesha Reddy ◽  
Ashish R. Jain ◽  
...  
Keyword(s):  
Bond Strength ◽  
Tensile Bond Strength ◽  
Denture Base ◽  
Base Resin ◽  
Denture Base Resin

scholarly journals Effect of Food Simulating Agents on the Hardness and Bond Strength of a Silicone Soft Liner to a Denture Base Acrylic Resin

2015 ◽  
Vol 9 (1) ◽  
pp. 402-408 ◽  
Author(s):  
A.A.R. Khaledi ◽  
M. Bahrani ◽  
S. Shirzadi
Keyword(s):  
Citric Acid ◽  
Bond Strength ◽  
Acrylic Resin ◽  
Tensile Bond Strength ◽  
Control Group ◽  
Denture Base ◽  
Bonding Failure ◽  
Base Resin ◽  
Soft Liner ◽  
Denture Base Resin

Statement of the Problem: Bonding failure between acrylic resin and soft liner material and also gradual loss of soft liner resiliency over time are two impending challenges frequently recognized with a denture base embraced with a resilient liner. Since patients drink various beverages, it is crucial to assess the influences of these beverages on physical characteristics of soft liners. Purpose: This in vitro study envisioned to assess the influence of food simulating agents (FSA) on the hardness of a silicone soft liner by employing a Shore A durometer test and also evaluate its bond strength to a denture base resin by using tensile bond strength test. Materials and Methods: To test the hardness of samples, 50 rectangular samples (40 mm × 10 mm × 3 mm) were prepared from a heat-polymerized polymethyl methacrylate (Meliodent). Mollosil, a commercially available silicone resilient liner, was provided and applied on the specimens following the manufacturer’s directions. In order to test tensile bond strength, 100 cylindrical specimens (30 mm × 10 mm) were fabricated. The liners were added between specimens with the thicknesses of 3 mm. The specimens were divided into 5 groups (n=10) and immersed in distilled water, heptane, citric acid, and 50% ethanol. For each test, we used 10 specimens as a baseline measurement; control group. All specimens were kept in dispersed containers at 37ºC for 12 days and all solutions were changed every day. The hardness was verified using a Shore A durometer and the tensile bond strength was examined by an Instron testing machine at a cross-head speed of 5 mm/min. The records were analyzed employing one-way ANOVA, Tukey’s HSD, and LSD tests. Results: The mean tensile bond strength ± standard deviation (SD) for Mollosil was as follows for each group: 3.1 ± 0.4 (water), 1.8 ± 0.4 (citric acid), 3.0 ± 0.4 (heptane), 1.2 ± 0.3 (50% ethanol), and 3.8 ± 0.4 (control). The hardness values for each group were: 28.7 ± 2.11 (water), 33.2 ± 2.82 (citric acid), 39.2 ± 4.8 (heptane), 32.3 ± 3.56 (50% ethanol) and 22.2 ± 2.08 (control). Mean values for hardness indicated that all of the food simulating agents significantly increased hardness of the Mollosil soft liner compared to the control group (p<0.05). The results of tensile bond strength depicted that water and FSA decreased the bond strength of the soft liner -denture base resin compared to the control group and it was statistically significant (p<0.05). Conclusion: The food simulating agents could influence the mechanical properties of silicone soft liners; hence, clinicians should inform their patients concerning their possible adverse effects and complications.

The Effect of Surface Treatments on Tensile Bond Strength between a Silicone Soft Liner and a Heat-Cured Denture Base Resin

2011 ◽  
Vol 87 (9) ◽  
pp. 951-965
Author(s):  
Koray Soygun ◽  
Giray Bolayir ◽  
Arife Dogan ◽  
Hakan Demir ◽  
Orhan Murat Dogan ◽  
...  
Keyword(s):  
Bond Strength ◽  
Surface Treatments ◽  
Tensile Bond Strength ◽  
Denture Base ◽  
Base Resin ◽  
Soft Liner ◽  
Denture Base Resin ◽  
Effect Of Surface

scholarly journals Tensile Bond Strength of Soft Liner to denture Base Resin Processed by two Commonly used Processing Techniques

2019 ◽  
pp. 267-270
Author(s):  
Peta Harish ◽  
T. Pavan Kumar ◽  
A. Avinash
Keyword(s):  
Bond Strength ◽  
Strength Test ◽  
Tensile Bond Strength ◽  
Denture Base ◽  
Heat Cure ◽  
Base Resin ◽  
Soft Liner ◽  
Processing Techniques ◽  
Denture Base Resin

This study evaluated the effect of two commonly used methods of processing permanent soft liner on tensile bond strength between denture base and soft liner. Silicone based soft liner was used in this study. Ten heat cure dumbbell shaped specimens along with soft liner were processed together. Another ten heat cure dumbbell shaped specimens were fabricated and later relined with soft liner. All the specimens were subjected to tensile bond strength test. Specimens relined directly with soft liner at the time of processing the denture base resin showed significantly higher bond strength.

scholarly journals Comparison and evaluation of tensile bond strength of two soft liners to the denture base resin with different surface textures: An in vitro study

2014 ◽  
Vol 3 (2) ◽  
pp. 102
Author(s):  
KunchaVenu Gopal ◽  
BrahmaJosyula Indira Padmaja ◽  
NagamRaja Reddy ◽  
BudigiMadan Mohan Reddy ◽  
Motupalli Sunil ◽  
...  
Keyword(s):  
Bond Strength ◽  
In Vitro Study ◽  
Vitro Study ◽  
Tensile Bond Strength ◽  
Denture Base ◽  
Surface Textures ◽  
Base Resin ◽  
Denture Base Resin

Effect of immersion cleansers on the bond strength between a denture base resin and acrylic resin teeth

2013 ◽  
Vol 44 ◽  
pp. 180-183 ◽  
Author(s):  
Ana Carolina Pero ◽  
Priscila Mattos Scavassin ◽  
Andressa Rosa Perin Leite ◽  
Danny Omar Mendoza Marin ◽  
André Gustavo Paleari ◽  
...  
Keyword(s):  
Bond Strength ◽  
Acrylic Resin ◽  
Denture Base ◽  
Base Resin ◽  
Denture Base Resin
Sign in / Sign up

Export Citation Format

Share Document