The Effect of Curing Light Type and Intensity on the Depth of Cure of Dental Resin Composites

Dental News ◽  
2012 ◽  
Vol 19 (4) ◽  
pp. 40-50
Author(s):  
Hashem M. Ridha ◽  
Hadi A. Al-Bahrani ◽  
Abdulaziz H. Aljazzaf
Keyword(s):  
Resin Composites ◽  
Dental Resin ◽  
Depth Of Cure ◽  
Dental Resin Composites ◽  
Curing Light

Dental Resin Composites with Enhanced Properties Bycommercial Silica Particles as Fillers

2015 ◽  
Vol 815 ◽  
pp. 336-341
Author(s):  
Shuang Bao ◽  
Rui Li Wang ◽  
Bin Sun ◽  
Xiao Ze Jiang ◽  
Mei Fang Zhu
Keyword(s):  
Mechanical Properties ◽  
Resin Composite ◽  
Flexural Modulus ◽  
Silica Particles ◽  
Component Ratio ◽  
Resin Composites ◽  
Dental Resin ◽  
Depth Of Cure ◽  
Dental Resin Composites ◽  
Enhanced Properties

To explore the preparation of novel dental resin composites with enhanced properties, two commercial silica particles with sizes of around 1μm and 40 nm were chosen as inorganic fillers, and firstly surface functionalized by 3-methacryloxypropyltrimethoxysilane (γ-MPS) to incorporate cross-linkable vinyl groups onto the surface of fillers. Then the modified fillers were blended with organic monomers, bisphenolAdiglycidyldimethacrylate (Bis-GMA) and triethylene glycol dimethacrylate (TEGDMA), to fabricate the resin compositeswith a three-roll mixer.Resin composites with various weight percentage of fillers and component ratio of microparticle and nanoparticle were prepared. Surface functionalization of silica particles was characterized by fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA), and mechanical properties degree of conversion, and depth of cure of the resultant resin composites were investigated byuniversal testing machineand FTIR. The results indicated that surface modification of silica particles was successful and the surface organic contents were 3.29% and 4.34%, respectively. Among the studied resin composites, the resin composite with 75 wt.% silica particles (59 wt.% microparticles and 16 wt.% nanoparticles) presented the highest value of depth of cure (5.52 ± 0.07 mm), and optimum mechanical properties such as flexural strength (149.8 ± 3.3 MPa), flexural modulus (13.8 ± 0.06 GPa), compressive strength (340.6 ± 8.3 MPa) and Vicker’smicrohardness (78.26 ± 2.45 HV). The study of dental resin composites fabricated from commercial silica particles with excellent properties might provide a new sight for realizing the preparation of this kind of dental resin composites in an industrial scale.

scholarly journals Depth of Cure of Dental Resin Composites: ISO 4049 Depth and Microhardness of Types of Materials and Shades

2008 ◽  
Vol 33 (4) ◽  
pp. 408-412 ◽  
Author(s):  
B. K. Moore ◽  
J. A. Platt ◽  
G. Borges ◽  
T-M. G. Chu ◽  
I. Katsilieri
Keyword(s):  
Clinical Relevance ◽  
Resin Composite ◽  
Resin Composites ◽  
Dental Resin ◽  
Degree Of Cure ◽  
Depth Of Cure ◽  
Dental Resin Composites ◽  
High Degree

Clinical Relevance Achieving a high degree of cure throughout a 2 mm thickness of light-activated resin composite did not occur for many types and shades of resin composite. Clinicians should check the depth of cure by using the scraping method.

Post-cure depth of cure of bulk fill dental resin-composites

2014 ◽  
Vol 30 (2) ◽  
pp. 149-154 ◽  
Author(s):  
A. Alrahlah ◽  
N. Silikas ◽  
D.C. Watts
Keyword(s):  
Resin Composites ◽  
Dental Resin ◽  
Depth Of Cure ◽  
Dental Resin Composites

Effect of light intensity and water aging on surface hardness of dental resin-composites

2019 ◽  
Vol 64 (11) ◽  
pp. 1007-1014
Author(s):  
Tong XU ◽  
◽  
Jia-Hui ZHANG ◽  
Zhao-Ying LIU ◽  
Xuan LI ◽  
...  
Keyword(s):  
Light Intensity ◽  
Surface Hardness ◽  
Resin Composites ◽  
Dental Resin ◽  
Dental Resin Composites ◽  
Effect Of Light

Viscosity and stickiness of dental resin composites at elevated temperatures

2021 ◽  
Vol 37 (3) ◽  
pp. 413-422
Author(s):  
Nikolaos Loumprinis ◽  
Eva Maier ◽  
Renan Belli ◽  
Anselm Petschelt ◽  
George Eliades ◽  
...  
Keyword(s):  
Elevated Temperatures ◽  
Resin Composites ◽  
Dental Resin ◽  
Dental Resin Composites

scholarly journals Effect of Accelerated Aging on Some Mechanical Properties and Wear of Different Commercial Dental Resin Composites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2769
Author(s):  
Jonne Oja ◽  
Lippo Lassila ◽  
Pekka K. Vallittu ◽  
Sufyan Garoushi
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Accelerated Aging ◽  
Wear Depth ◽  
Resin Composites ◽  
Expiration Date ◽  
Dental Resin ◽  
Hydrothermal Aging ◽  
Dental Resin Composites

The aim of current in vitro research was to determine the effect of hydrothermal accelerated aging on the mechanical properties and wear of different commercial dental resin composites (RCs). In addition, the effect of expiration date of the composite prior its use was also evaluated. Five commercially available RCs were studied: Conventional RCs (Filtek Supreme XTE, G-aenial Posterior, Denfil, and >3y expired Supreme XTE), bulk-fill RC (Filtek Bulk Fill), and short fiber-reinforced RC (everX Posterior). Three-point flexural test was used for determination of ultimate flexural strength (n = 8). A vickers indenter was used for testing surface microhardness. A wear test was conducted with 15,000 chewing cycles using a dual-axis chewing simulator. Wear pattern was analyzed by a three-dimensional (3D) noncontact optical profilometer. Degree of C=C bond conversion of monomers was determined by FTIR-spectrometry. The specimens were either dry stored for 48 h (37 °C) or boiled (100 °C) for 16 h before testing. Scanning electron microscopy (SEM) was used to evaluate the microstructure of each material. Data were analyzed using ANOVA (p = 0.05). Hydrothermal aging had no significant effects on the surface wear and microhardness of tested RCs (p > 0.05). While flexural strength significantly decreased after aging (p < 0.05), except for G-aenial Posterior, which showed no differences. The lowest average wear depth was found for Filtek Bulk Fill (29 µm) (p < 0.05), while everX Posterior and Denfil showed the highest wear depth values (40, 39 µm) in both conditions. Passing the expiration date for 40 months did not affect the flexural strength and wear of tested RC. SEM demonstrated a significant number of small pits on Denfil’s surface after aging. It was concluded that the effect of accelerated aging may have caused certain weakening of the RC of some brands, whereas no effect was found with one brand of RC. Thus, the accelerated aging appeared to be more dependent on material and tested material property.

Evaluating antibacterial and surface mechanical properties of chitosan modified dental resin composites

2020 ◽  
Vol 28 (2) ◽  
pp. 165-173 ◽  
Author(s):  
Shahid Ali ◽  
Laila Sangi ◽  
Naresh Kumar ◽  
Bharat Kumar ◽  
Zohaib Khurshid ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Resin Composites ◽  
Dental Resin ◽  
Dental Resin Composites
Sign in / Sign up

Export Citation Format

Share Document