Kinematics and parameters of rolling process for the rotary working bodies of the cultivator for nursery

2016 ◽  
Vol 6 (3) ◽  
pp. 156-161
Author(s):  
Казаков ◽  
Igor Kazakov ◽  
Казаков ◽  
Vladimir Kazakov
Keyword(s):  
Plant Growth ◽  
Soil Cover ◽  
Rolling Process ◽  
Free Rotation ◽  
Early Stages ◽  
Unit Translation ◽  
Working Bodies

It is possible to improve the quality of agro-technical care of plants in arboretums by ap-plying the rotary working bodies in the form of needle-shaped discs which thanks to a combina-tion of the unit translation with their free rotation, provide qualitative opening of the soil along with weeding. The main purpose of the needle-shaped disks is to destruct the soil cover and weeding in the early stages of a plant growth.

SISTEM OTOMASI PENYIRAMAN TANAMAN BERBASIS TELEGRAM

SIGMA TEKNIKA ◽  
2019 ◽  
Vol 2 (1) ◽  
pp. 81
Author(s):  
Muhammad Irsyam
Keyword(s):  
Soil Moisture ◽  
Plant Growth ◽  
Water Intake ◽  
Smart Phone ◽  
Growth Failure ◽  
Automation System ◽  
Notification System ◽  
Efficiency And Effectiveness ◽  
Plant Automation

ABSTRAK           Faktor yang menentukan kegagalan pertumbuhan suatu tanaman hampir dipengaruhi oleh teknik atau cara penyiraman tanaman yang salah. Hal ini disebabkan oleh teknik penyiraman yang dilakukan secara manual sehingga tidak semua tanaman mendapatkan asupan air yang merata untuk menghidari tanaman menjadi layu. Faktor lain yang menyebabkan kegagalan pertumbuhan tanaman adalah kelembaban tanah.          Oleh karena itu, untuk mengurangi permasalahan tersebut dirancanglah “Sistem Otomasi Penyiraman Tanaman Berbasis Telegram”. Adapun sistem ini meliputi penyiraman tanaman secara otomatis berdasarkan kadar kelembaban tanah dengan sistem pemberitahuan atau notifikasi yang akan dikirimkan kepada petani dengan menggunakan aplikasi smart phone Telegram.          Sistem ini telah mampu mengontrol penyiraman sesuai dengan kondisi yang diinginkan. Dengan adanya sistem otomasi penyiraman tanaman berbasis telegram maka dapat meningkatkan efesiensi dan efektivitas petani sehingga kualitas tanaman dapat terjaga dengan baik.Kata kunci -- Penyiraman Tanaman, Penyiraman Secara Otomatis, Telegram.ABSTRACT                Factors that determine the failure of a plant's growth of almost are influenced by incorrect cropping techniques or methods. This is caused by the technique of watering is done manually so that not all plants get a uniform water intake to avoid crops withered. Another factor that causes plant growth failure is soil moisture.          Therefore, to reduce the problem was designed "Telegram Based Water Planting Automation System". The system includes automatic watering of plants based on moisture level of the soil with a notification or notification system that will be sent to farmers using Telegram smart phone applications.          This system has been able to control the watering according to the desired conditions. With the telegraph-based plant watering plant automation system can improve the efficiency and effectiveness of farmers so that the quality of the plant can be maintained properly. Keywords -- Watering Plants, Watering Automatically, Telegram.  

Evaluation of the Properties of Humus Liquid of Earthworm Eisenia Foetida Obtained from Different Rachis

2017 ◽  
Vol 3 (02) ◽  
Author(s):  
Ramiro Remigio Gaibor Fernández ◽  
Abraham Adalberto Bayas Zamora ◽  
Galo Israel Muñoz Sánchez ◽  
Cristhian Adrián Rivas Santacruz
Keyword(s):  
Plant Growth ◽  
Fulvic Acids ◽  
Cattle Manure ◽  
Eisenia Foetida ◽  
Humic And Fulvic Acids ◽  
Livestock Manure ◽  
A Value ◽  
The One ◽  
Liquid Slurry

The objective of the present investigation was to evaluate the physical characteristics of the vermicompost and the quality of the purine of the red Californian (Eisenia foetida) using different substrates of feed for these worms. For this purpose, nine treatments were studied: 75% African palm rachis + 25% cattle manure, 50% African palm rachis + 50% cattle manure, 25% African palm rachis + 75% livestock manure, 50% manure of cattle, 50% of manure of cattle, 25% of manure of cattle, 50% of manure of cattle, 50% of manure of cattle, 50% of rach of coconut + 50% of manure of Livestock, 25% coccus rachis + 75% livestock manure. The substrate made up of 50% of rachis of coconut and 50% of livestock manure can be used in nurseries or nurseries for being the one that registered a value of pH 7.3 plus the closest to the neutral compared to the others, besides this (75% of oil palm rachis and 25% of cattle manure) showed a higher content of humic and fulvic acids (0.87 and 0.45 p / p, respectively), compounds that are important for agriculture by stimulating plant growth, in addition to this reflection 0.06% sulfur content, 4.0 ppm boron, 7.0 ppm copper, 47.5 ppm iron, 6.0 ppm manganese, with a presence of microorganisms of the species Trichoderma, Penicillium, Cladosporium sp. in amounts of 1.91x105 UFC / ml, however in this substrate was obtained between 13.3 and 43.5% less liquid slurry in Comparison with other treatments.

scholarly journals Results of Laboratory Studies of the Automated Sorting System for Root and Onion Crops

Agronomy ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1257
Author(s):  
Alexey Dorokhov ◽  
Alexander Aksenov ◽  
Alexey Sibirev ◽  
Nikolay Sazonov ◽  
Maxim Mosyakov ◽  
...  
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Automatic Control System ◽  
Technological Parameters ◽  
Post Harvest ◽  
Manual Sorting ◽  
Sorting System ◽  
Working Bodies ◽  
Automatic Removal

The roller and sieve machines most commonly used in Russia for the post-harvest processing of root and tuber crops and onions have a number of disadvantages, the main one being a decrease in the quality of sorting due to the contamination of working bodies, which increases the quantity of losses during sorting and storage. To obtain high-quality competitive production, it is necessary to combine a number of technological operations during the sorting process, such as dividing the material into classes and fractions by quality and size, as well as identifying and removing damaged products. In order to improve the quality of sorting of root tubers and onions by size, it is necessary to ensure the development of an automatic control system for operating and technological parameters, the use of which will eliminate manual sorting on bulkhead tables in post-harvest processing. To fulfill these conditions, the developed automatic control system must have the ability to identify the material on the sorting surface, taking into account external damage and ensuring the automatic removal of impurities. In this study, the highest sorting accuracy of tubers (of more than 91%) was achieved with a forward speed of 1.2 m/s for the conveyor of the sorting table, with damage to 2.2% of the tubers, which meets the agrotechnical requirements for post-harvest processing. This feature distinguishes the developed device from similar ones.

scholarly journals Nanotechnology Potential in Seed Priming for Sustainable Agriculture

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 267
Author(s):  
Anderson do Espirito Santo Pereira ◽  
Halley Caixeta Oliveira ◽  
Leonardo Fernandes Fraceto ◽  
Catherine Santaella
Keyword(s):  
Plant Growth ◽  
Agricultural Practices ◽  
Seed Priming ◽  
Growth Hormones ◽  
Plant Growth And Development ◽  
Plant Growth Hormones ◽  
Entire Plant ◽  
Quality Of Food ◽  
Sustainable Agricultural Practices

Our agriculture is threatened by climate change and the depletion of resources and biodiversity. A new agriculture revolution is needed in order to increase the production of crops and ensure the quality and safety of food, in a sustainable way. Nanotechnology can contribute to the sustainability of agriculture. Seed nano-priming is an efficient process that can change seed metabolism and signaling pathways, affecting not only germination and seedling establishment but also the entire plant lifecycle. Studies have shown various benefits of using seed nano-priming, such as improved plant growth and development, increased productivity, and a better nutritional quality of food. Nano-priming modulates biochemical pathways and the balance between reactive oxygen species and plant growth hormones, resulting in the promotion of stress and diseases resistance outcoming in the reduction of pesticides and fertilizers. The present review provides an overview of advances in the field, showing the challenges and possibilities concerning the use of nanotechnology in seed nano-priming, as a contribution to sustainable agricultural practices.

scholarly journals The Effect of Process Parameters in Helical Rolling of Balls on the Quality of Products and the Forming Process

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2125 ◽  
Author(s):  
Janusz Tomczak ◽  
Zbigniew Pater ◽  
Tomasz Bulzak
Keyword(s):  
Metal Flow ◽  
Experimental Tests ◽  
Rolling Process ◽  
Helical Rolling ◽  
Forming Process ◽  
University Of Technology ◽  
Quality Of Products ◽  
Skew Rolling

This paper presents selected numerical and experimental results of a skew rolling process for producing balls using helical tools. The study investigates the effect of the billet’s initial temperature on the quality of produced balls and the rolling process itself. In addition, the effect of billet diameter on the quality of produced balls is investigated. Experimental tests were performed using a helical rolling mill available at the Lublin University of Technology. The experiments consisted of rolling 40 mm diameter balls with the use of two helical tools. To determine optimal rolling parameters ensuring the highest quality of produced balls, numerical modelling was performed using the finite element method in the Forge software. The numerical analysis involved the determination of metal flow kinematics, temperature and damage criterion distributions, as well as the measurement of variations in the force parameters. The results demonstrate that the highest quality balls are produced from billet preheated to approximately 1000 °C.

Boring-Rolling Process Research and Tooling Design of Hydraulic Cylinder

2013 ◽  
Vol 842 ◽  
pp. 634-638
Author(s):  
Yan Jing ◽  
Feng Zhao
Keyword(s):  
Process Parameters ◽  
High Efficiency ◽  
Hydraulic Cylinder ◽  
Rolling Process ◽  
Process Research ◽  
Cylinder Block ◽  
Process Route ◽  
Emerging Issues ◽  
Tooling Design

By comparison, this paper determines inner bore processing technic program of the engineering machinery hydraulic cylinder block and makes some analysis of the rolling processing technic and relevant emerging issues to propose reasonable and feasible process route and process parameters and ensure the quality of the cylinder processing. It also shows the design of boring-rolling compound tools with high efficiency and high precision for given cylinders.

Yield increase and higher flesh firmness of 'Arctic Snow' nectarines both at harvest in Australia and after export to Taiwan following pre-harvest application of ReTain Plant Growth Regulator (aminoethoxyvinylglycine, AVG)

2004 ◽  
Vol 44 (3) ◽  
pp. 343 ◽  
Author(s):  
A. C. Rath ◽  
A. J. Prentice
Keyword(s):  
Plant Growth ◽  
Growth Regulator ◽  
Plant Growth Regulator ◽  
Fruit Size ◽  
Yield Increase ◽  
Flesh Firmness ◽  
Ambient Storage ◽  
Class 1 ◽  
Harvest Delay

The effects ReTain Plant Growth Regulator (830 g in 1000 L water/ha) applied to a commercial block of 'Arctic Snow' nectarines 7 days before the first harvest was assessed in relation to harvest delay, fruit size, fruit quality (flesh firmness and brix), as well as the quality of the fruit following export to Taiwan. The untreated block (0.87 ha) and the ReTain-treated block (1.0 ha) were harvested according to the orchard's standard maturation criteria of background colour, size and percent blush colour. Based on picking schedules, the maturation of the ReTain block was delayed by 2.75 days (P<0.05). The fruit continued to grow during this delay and resulted in a 12.3% increase in yield and an increase of 393 packed cartons/ha. There were more (P<0.001) cartons of ReTain-treated fruit packed in grade sizes 69–78 mm diameter and less of smaller size classes (51–66 mm) compared with untreated fruit. The increase in both the number of cartons of class 1 fruit and fruit size on the ReTain block resulted in a Return on Investment (ROI) of 14.7 : 1 with an additional net return of AU$17 655/ha over the untreated block. There was a correlation between fruit size and flesh firmness with larger fruit being firmer than smaller fruit (P<0.001), however, packed ReTain-treated fruit was 3.2 N firmer on average (P<0.001) than packed untreated fruit for all size grades and from all harvests and packs. Brix levels increased (P<0.001) with fruit size but there was no difference (P = 0.568) between ReTain-treated fruit and untreated fruit. Two containers of fruit (early and late picks) were exported to Taiwan. The containers held a temperature of 0.5–2.0°C for the 14–15 day transit time from Australia to Taiwan. ReTain-treated fruit in both containers was 1.7 N firmer (P = 0.022) than untreated fruit upon arrival in Taiwan. After ambient storage (23°C) of fruit from container 1 for 45 h, fruit firmness declined (P<0.001) from an average of 65.7 to 43.2 N and there was no difference (P = 0.826) between treated or untreated fruit. It is concluded that ReTain application to 'Arctic Snow' nectarines can increase financial returns to growers through increased fruit size and quality benefits as well as maintain a higher flesh firmness following export.

Optimization of Rolling Modes on the Mill 1700 of JSC "ArselorMittal Temirtau" with Aim to Increase Quality of Sheet Rolled Products

2015 ◽  
Vol 1095 ◽  
pp. 786-794
Author(s):  
A.B. Naizabekov ◽  
V.A. Talmazan ◽  
S.N. Lezhnev ◽  
E.A Panin ◽  
А.S. Erzhanov ◽  
...  
Keyword(s):  
Surface Defects ◽  
Mechanical Damage ◽  
Rolling Process ◽  
Rolled Sheet ◽  
Strip Rolling ◽  
Technological Factors ◽  
Second Stage ◽  
Sheet Surface ◽  
Cold Rolled

Used the influence of technological factors of the rolling process on the intensity of the rolling out of the defect to determine the value of deformation and the coefficient of use of the plasticity resource. Introduced the notion of residual coefficient of plasticity resource in the second stage of transformation of the defect. Found that the causes of deterioration of the quality of cold-rolled sheet can be numerous defects of mechanical origin, caused by mechanical damage of the sheet surface. Conducted an analysis of profiles rolling modes, rolled on the mill 1700. With the use of existing methods calculated DUPR on workshop modes of rolling of specified profiles with and without considering the surface defects. Carried an optimization of the modes of strip rolling with surface defects.

scholarly journals Crop and quality of garlic for application of plant growth regulators

2019 ◽  
Vol 94 (1) ◽  
pp. 186-198
Author(s):  
O. I. Ulyanych ◽  
◽  
I. A. Didenko ◽  
V. V. Yatsenko ◽  
◽  
...  
Keyword(s):  
Plant Growth ◽  
Plant Growth Regulators ◽  
Growth Regulators
Sign in / Sign up

Export Citation Format

Share Document