The experimental research results of the influence of the shape of the contact surface of the basement to the deformable subgrade.

2016 ◽  
Vol 4 (2) ◽  
pp. 0-0
Author(s):  
Юлия Наумкина ◽  
Ulia Naumkina ◽  
Яков Пронозин ◽  
Yakov Pronozin ◽  
Дмитрий Рачков ◽  
...  
Keyword(s):  
Experimental Data ◽  
Experimental Study ◽  
Experimental Research ◽  
Contact Surface ◽  
Soil Deformation ◽  
Lateral Compression ◽  
The Core ◽  
Modulus Of Deformation ◽  
Deformed State ◽  
Core Base

The article presents the analysis of the results of field experimental study of the effect of the contact surface forms of the foundation on the deformability of subgrade. Experimental data show peculiarities of intensely deformed state of subgrade loaded on a curved concave contact surface. Stiffening of the base in this case is due to higher modulus of deformation of soil deformation in the core base, due to the additional lateral compression of soil, relating to a form of the contact surface.

Numerical Simulation and Experimental Research on Fatigue Strength of the Injector Guide Pillar under Complex Loads

2010 ◽  
Vol 118-120 ◽  
pp. 196-200
Author(s):  
Jin Guo Li ◽  
Xiao Gui Wang ◽  
Zeng Liang Gao
Keyword(s):  
Experimental Data ◽  
Mechanical Properties ◽  
Numerical Simulation ◽  
Experimental Study ◽  
Fatigue Life ◽  
Fatigue Strength ◽  
Numerical Analysis ◽  
Experimental Research ◽  
Contact Surface ◽  
Electronic Measurement

Under the complex loads, the injector guide pillar (IGP) used in injection machine was failure only after 1.5-year-service. In order to determine the cause of the fracture, the numerical simulation technology was applied to analyze the mechanical properties of the IGP. The contact between the mating surfaces of the clamping mechanism was modeled; nonlinear multi-region contact of surface-surface was applied to establish the contact model of FEA. The constraint of tie was used for modeling thread joint. The simulated results indicated that the smaller area of contact surface, the higher value of stress in the neck of IGP. Electronic measurement was also used to check the results of stress in IGP obtained by FEA. It was found that the experimental data agreed well with simulated results. Based on the numerical analysis and experimental study, the structure of IGP was improved by adopting a smoother double-round neck. The fatigue life of the improved structure was longer than that of the original machine.

EXPERIMENTAL STUDY OF THE KINEMATIC PARAMETERS OF MOVEMENT OF CARS FORCED IDLE MOTION

2018 ◽  
pp. 52-57
Author(s):  
Ivelin Kostov
Keyword(s):  
Experimental Data ◽  
Experimental Study ◽  
Experimental Research ◽  
Kinematic Parameters ◽  
Research Results ◽  
Software Product

In the work brought some experimental data of kinematic parameters of movement of cars forced idle, as the software product was used to diagnose 900 ATS, which recorded kinematic parameters of vehicle. On the basis of the conducted experimental research results are shown tabulated and analysed.

Experimental Study on the Loaded Property of Waste Fiber Recycled Concrete Beam-Column Joints

2015 ◽  
Vol 727-728 ◽  
pp. 69-72
Author(s):  
Jing Hai Zhou ◽  
Yun Cong Shu ◽  
Shu Jun Bai
Keyword(s):  
Experimental Study ◽  
Experimental Research ◽  
Fiber Length ◽  
Concrete Beam ◽  
Recycled Concrete ◽  
Core Area ◽  
Recycled Aggregates ◽  
Axial Compression Ratio ◽  
The Core ◽  
Loading Type

Considering the actual factors such as axial compression ratio, constraint conditions and so on, We design 10 beam-column joints of different parameters under the condition of the same reinforcement ratio and use the monotonic loading type to study the influences of dosage of recycled aggregates and waste fibers, waste fiber length on beam-column joints on the ultimate bearing capacity of the core area. Experimental research shows that when the dosage of recycled aggregates is 50% , waste fiber content is 0.12%, waste fiber length is 19 mm, the node ultimate bearing core area best performance.

scholarly journals Experimental Research on C60 Concrete Strength Evolution under Different Curing Conditions

2020 ◽  
Vol 198 ◽  
pp. 01002
Author(s):  
Zhu Ran ◽  
Xu Jun ◽  
Zhan Yijian ◽  
Zuo Zibo ◽  
Zhou Xiangyang ◽  
...  
Keyword(s):  
Experimental Data ◽  
Experimental Study ◽  
Compressive Strength ◽  
Experimental Research ◽  
Concrete Strength ◽  
Functional Relation ◽  
Maturity Models ◽  
Curing Conditions ◽  
Under Five ◽  
Strength Evolution

An experimental study on the C60 concrete was carried out under five different curing conditions based on the maturity theory. The influence patterns of the curing conditions on the increase of the C60 concrete strength were discussed. The experimental data were fitted using different strength-maturity models, the accuracies of which were then analyzed. The results show that the mapping relation between the compressive strength and maturity of the C60 concrete could be well characterized by the logarithmic functional relation.

Improvement of Stamping by Rolling Processes of Pipe and Cylindrical Blades on Experimental Research

2020 ◽  
Vol 844 ◽  
pp. 168-181
Author(s):  
Andrii Shtuts ◽  
Mykola Kolisnyk ◽  
Andrii Vydmysh ◽  
Oleksandr Voznyak ◽  
Serhii Baraban ◽  
...  
Keyword(s):  
Experimental Data ◽  
Experimental Study ◽  
Mathematical Models ◽  
Experimental Research ◽  
Lateral Surface ◽  
Side Surface

During the experimental study, a pronounced beating and sealing of the side surface of the tubular, cylindrical blanks was recorded. It is established that cracks appear and develop in the central part of the lateral surface, i.e., it are destroyed. This fact confirms the claim that the destruction of tubular, cylindrical blanks of some materials begins on the side surface. It is established that the bases of analytical dependencies between the components of deformations describe the obtained results of the experimental study of SR tubular, cylindrical blanks within the error of the experimental data, which made it possible to construct a number of mathematical models for the purpose of further study of the SDS and the method of their determination.

SEMIEMPIRICAL SCF–LCAO–MO TREATMENT OF THIOPHENE, FURAN, AND PYRROLE

1965 ◽  
Vol 43 (5) ◽  
pp. 1569-1576 ◽  
Author(s):  
N. Solony ◽  
F. W. Birss ◽  
John B. Greenshields
Keyword(s):  
Experimental Data ◽  
Satisfactory Agreement ◽  
Electronic Structures ◽  
Spectroscopic Data ◽  
Variable Parameter ◽  
Coulomb Repulsion ◽  
Resonance Integral ◽  
Electronic Transitions ◽  
The Core ◽  
Lcao Mo

The semiempirical SCF–LCAO–MO method of Pariser–Parr–Pople is utilized in the study of the π-electronic structures of thiophene, furan, and pyrrole. The core Hamiltonian expansion contains a Uz++ term, the potential due to the ionized hetero-atom contributing two electrons to the π-system. The γzz, one-center coulomb repulsion integral for the hetero-atom is evaluated from the experimental spectroscopic data only. With the resonance integral βczc as the only variable parameter, the calculated π*–π electronic transitions are in a satisfactory agreement with the experimental data.

3D-Atom Probe Investigation of Vacancy Induced Interdiffusion during High Pressure Torsion Deformation

2006 ◽  
Vol 503-504 ◽  
pp. 433-438 ◽  
Author(s):  
Xavier Sauvage
Keyword(s):  
Experimental Data ◽  
High Pressure ◽  
Long Range ◽  
High Pressure Torsion ◽  
Pearlitic Steel ◽  
Atom Probe ◽  
Concentration Gradients ◽  
Deformed State ◽  
Torsion Deformation ◽  
Probe Investigation

Concentration gradients resulting from long range diffusion during Severe Plastic Deformation (SPD) have been investigated with the 3D Atom Probe technique (3D-AP). First, in a pearlitic steel where alloying elements (Mn, Si and Cr) are partitioned between the ferrite and carbides in the non-deformed state. After processing by High Pressure Torsion (HPT), they are homogeneously distributed in the nanostructure, indicating that long range diffusion occurred along with the dissolution of carbides. 3D-AP data of a Cu-Fe composite processed by HPT show as well a significant interdiffusion of Cu and Fe, probably promoted by additional vacancies. On the basis of these experimental data, and using the theory described for irradiated materials, vacancy fluxes and vacancy production rates were estimated assuming that new vacancies are continuously produced and eliminated on grain boundaries.

The Stress Analysis and Experimental Research of Tubular K-Joints With Overlap

1987 ◽  
Vol 109 (4) ◽  
pp. 375-380
Author(s):  
Tie-yun Chen ◽  
Wei-min Chen
Keyword(s):  
Experimental Data ◽  
Stress Concentration ◽  
Variational Method ◽  
Stress Analysis ◽  
Experimental Research ◽  
Hot Spot ◽  
Intersection Point ◽  
Tubular Joints ◽  
Photoelastic Experiment ◽  
Intersection Curves

The geometry of overlapping tubular joints, the equations of intersection curves and the coordinate of the intersection point are introduced first. The variational method for simple tubular joints is extended to the stress analysis of tubular K-joints with overlap. The computer program is compiled. The stress concentration factor and the position of the hot spot of an overlapping joint are found. For the sake of proving the feasibility of our analysis and program, the computed results are compared with experimental data of our photoelastic experiment and other experiments.

Experimental study of hypochloremia

1935 ◽  
Vol 31 (8-9) ◽  
pp. 1112-1112
Keyword(s):  
Experimental Data ◽  
Experimental Study

Analyzing clinical and experimental data on hypochloremia, the authors show that both during vomiting and when giving diuretica, it is not only about the loss of chlorine, but at the same time a large amount of water is lost.

Results of an experimental study of hydrogel drainage containing ranibizumab in antiglaucoma operations

2021 ◽  
pp. 63-67
Author(s):  
I.I. Khusnitdinov ◽  
Keyword(s):  
Experimental Study ◽  
Hyaluronic Acid ◽  
Key Words ◽  
Experimental Research ◽  
Experimental Studies ◽  
Glaucoma Surgery ◽  
Control Group ◽  
Morphological Studies

Purpose. Еxperimental substantiation of the effectiveness of biocompatible biodegradable hydrogels based on hyaluronic acid and chitosan succinate as a carrier of ranibizumab in antiglaucoma operations. Material and methods. Hydrogel drainage (HD) was obtained immediately before surgery. A solution of ranibizumab (0.23 ml) was mixed with a solution of hyaluronic acid dialdehyde (0.5 ml), then a solution of chitosan succinate (0.5 ml) was added. Experimental studies were performed in 12 (12 eyes) healthy rabbits. The first group consisted of 6 eyes – 0.187 ml of ranibizumab per 1 ml of gel. In the control group, HD was used intraoperatively without the addition of ranibizumab (6 eyes). Morphological studies were performed on 7th, 21st, and 42nd days. Results. In experimental studies in vitro and in vivo, it was proved that ranibizumab, administered as a part of 0.1 ml of hydrogel drainage in the antiglaucoma surgery area is released within 3 weeks and suppresses vascularization, scarring of the operating area, and preserves the intrascleral cavity. The optimal concentration of ranibizumab was selected-0.02 ml in 0.1 ml of gel. Conclusion. The safety and effectiveness of the use of hydrogel drainage with ranibizumab based on hyaluronic acid dialdehyde and chitosan succinate in anti-glaucoma operations has been proven. Key words: experimental research, hydrogel drainage, ranibizumab, glaucoma surgery.

Sign in / Sign up

Export Citation Format

Share Document