scholarly journals Research on Assessment for Moisture Content in Output Control during Cut Tobacco Drying Process

2016 ◽  
Vol 05 (02) ◽  
pp. 89-128
Author(s):  
一涛 羊
Keyword(s):  
Moisture Content ◽  
Drying Process ◽  
Output Control ◽  
Cut Tobacco

scholarly journals Intelligent Control in the Application of a Rotary Dryer for Reduction in the Over-Drying of Cut Tobacco

2021 ◽  
Vol 11 (17) ◽  
pp. 8205
Author(s):  
Shunpeng Pang ◽  
Junhua Jia ◽  
Xiangqian Ding ◽  
Shusong Yu ◽  
Yang Liu
Keyword(s):  
Moisture Content ◽  
Regulatory Control ◽  
Drying Process ◽  
Tobacco Production ◽  
Rotary Dryer ◽  
Moisture Content Level ◽  
Optimal Value ◽  
Cut Tobacco ◽  
Rotary Drying ◽  
Unit Performance

The drying process is fundamental for cut tobacco processing. However, there are some problems related to the drying process such as overheating, or inconsistent control of moisture content. This paper shows how an intelligent controller is designed for an industrial rotary drying system. This controller is applied to a tobacco production unit to reduce overdried cut tobacco and improve the overall unit performance. The proposed control system aims to keep the content of moisture at the dryer outlet as close as possible to the optimal value and improve the homogeneity of the product without any operator intervention. The study shows that, if a reduction of humidity in the cut tobacco drying process is achieved using AI, the quality of the final product improves. In particular, if compared to regulatory control, the proposed method constantly monitors and adjusts the moisture content level in order to reduce the amount of overdried product. The findings of this paper indicate that the suggested process can save at least 222.2 kg of cut tobacco for each batch in the first stage of the drying process.

scholarly journals Simulation of Heat and Mass Transfer of Cut Tobacco in a Batch Rotary Dryer by Multi-Objective Optimization

2020 ◽  
Vol 29 (3) ◽  
pp. 145-155
Author(s):  
Feng Huang ◽  
Nan Deng ◽  
Qiaoling Li ◽  
Bin Li ◽  
Ruilin Hu ◽  
...  
Keyword(s):  
Mass Transfer ◽  
Moisture Content ◽  
Heat And Mass Transfer ◽  
Weight Factor ◽  
Multi Objective Optimization ◽  
Drying Process ◽  
Transfer Coefficients ◽  
Multi Objective ◽  
Rotary Dryer ◽  
Cut Tobacco

Summary To simulate the drying process of cut tobacco in a batch rotary dryer, six different models of equilibrium moisture content were selected to calculate the driving force of mass transfer, and a mathematical model of heat and mass transfer was numerically solved. The multi-objective nonlinear problem of heat and mass transfer coefficients was optimized by employing a weight factor. The simulation results showed that the weight factor r was an important parameter for fitting results of moisture content and temperature. The model evaluation indices almost reached their minimal values with r at 0.1. For all the six equilibrium/classic models the fit was better for moisture content than for temperature. One model (M-Hen/C) was superior to other equilibrium/classic models and the REA (reaction engineering approach) model. This study aims for an understanding of heat and mass transfer in the tobacco drying process, and provides a theoretical framework to support the prediction of temperature and moisture in various drying situations.

scholarly journals A Novel Parabolic Trough Concentrating Solar Heating for Cut Tobacco Drying System

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Jiang Tao Liu ◽  
Ming Li ◽  
Qiong Fen Yu ◽  
De Li Ling
Keyword(s):  
Mathematical Model ◽  
Moisture Content ◽  
Solar Heating ◽  
Test Method ◽  
Drying Process ◽  
Parabolic Trough ◽  
Preparation Conditions ◽  
Drying System ◽  
Cut Tobacco ◽  
Opening Width

A novel parabolic trough concentrating solar heating for cut tobacco drying system was established. The opening width effect of V type metal cavity absorber was investigated. A cut tobacco drying mathematical model calculated by fourth-order Runge-Kutta numerical solution method was used to simulate the cut tobacco drying process. And finally the orthogonal test method was used to optimize the parameters of cut tobacco drying process. The result shows that the heating rate, acquisition factor, and collector system efficiency increase with increasing the opening width of the absorber. The simulation results are in good agreement with experimental data for cut tobacco drying process. The relative errors between simulated and experimental values are less than 8%, indicating that this mathematical model is accurate for the cut tobacco airflow drying process. The optimum preparation conditions are an inlet airflow velocity of 15 m/s, an initial cut tobacco moisture content of 26%, and an inlet airflow temperature of 200°C. The thermal efficiency of the dryer and the final cut tobacco moisture content are 66.32% and 14.15%, respectively. The result shows that this parabolic trough concentrating solar heating will be one of the heat recourse candidates for cut tobacco drying system.

CATFISH DRYING (Clarias Batraclus) USING ‘TEKO BERSAYAP’ SOLAR DRYER

2012 ◽  
Vol 2 (1) ◽  
pp. 14-20
Author(s):  
Yuwana Yuwana
Keyword(s):  
Relative Humidity ◽  
Moisture Content ◽  
Ambient Temperature ◽  
Drying Rate ◽  
Drying Process ◽  
Drying Time ◽  
Ambient Relative Humidity ◽  
Solar Dryer

Experiment on catfish drying employing ‘Teko Bersayap’ solar dryer was conducted. The result of the experiment indicated that the dryer was able to increase ambient temperature up to 44% and decrease ambient relative humidity up to 103%. Fish drying process followed equations : KAu = 74,94 e-0,03t for unsplitted fish and KAb = 79,25 e-0,09t for splitted fish, where KAu = moisture content of unsplitted fish (%), KAb = moisture content of splitted fish (%), t = drying time. Drying of unsplitted fish finished in 43.995 hours while drying of split fish completed in 15.29 hours. Splitting the fish increased 2,877 times drying rate.

scholarly journals Wood Chip Drying through the Using of a Mobile Rotary Dryer

Energies ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1590 ◽  
Author(s):  
Angelo Del Giudice ◽  
Andrea Acampora ◽  
Enrico Santangelo ◽  
Luigi Pari ◽  
Simone Bergonzoli ◽  
...  
Keyword(s):  
Moisture Content ◽  
Power Plants ◽  
Black Locust ◽  
Thermal Power ◽  
Initial Moisture Content ◽  
Wood Chip ◽  
Wood Chips ◽  
Cocurrent Flow ◽  
Drying Process ◽  
Rotary Dryer

Drying is a critical point for the exploitation of biomass for energy production. High moisture content negatively affects the efficiency of power generation in combustion and gasification systems. Different types of dryers are available however; it is known that rotary dryers have low cost of maintenance and consume 15% and 30% less in terms of specific energy. The study analyzed the drying process of woody residues using a new prototype of mobile rotary dryer cocurrent flow. Woodchip of poplar (Populus spp.), black locust (Robinia pseudoacacia L.), and grapevine (Vitis vinifera L.) pruning were dried in a rotary drier. The drying cycle lasted 8 h for poplar, 6 h for black locust, and 6 h for pruning of grapevine. The initial biomass had a moisture content of around 50% for the poplar and around 30% for grapevine and black locust. The study showed that some characteristics of the biomass (e.g., initial moisture content, particle size distribution, bulk density) influence the technical parameters (i.e., airflow temperature, rate, and speed) of the drying process and, hence, the energy demand. At the end of the drying process, 17% of water was removed for poplar wood chips and 31% for grapevine and black locust wood chips. To achieve this, result the three-biomass required 1.61 (poplar), 0.86 (grapevine), and 1.12 MJ kgdry solids−1 (black locust), with an efficiency of thermal drying (η) respectively of 37%, 12%, and 27%. In the future, the results obtained suggest an increase in the efficiency of the thermal insulation of the mobile dryer, and the application of the mobile dryer in a small farm, for the recovery of exhaust gases from thermal power plants.

scholarly journals Cherry Tomato Drying: Sun versus Convective Oven

Horticulturae ◽  
2021 ◽  
Vol 7 (3) ◽  
pp. 40
Author(s):  
Vincenzo Alfeo ◽  
Diego Planeta ◽  
Salvatore Velotto ◽  
Rosa Palmeri ◽  
Aldo Todaro
Keyword(s):  
Moisture Content ◽  
Initial Moisture Content ◽  
Drying Process ◽  
Drying Time ◽  
Oven Drying ◽  
Sun Drying ◽  
Different Temperatures ◽  
Final Water Content ◽  
Drying Curves ◽  
Drying Conditions

Solar drying and convective oven drying of cherry tomatoes (Solanum lycopersicum) were compared. The changes in the chemical parameters of tomatoes and principal drying parameters were recorded during the drying process. Drying curves were fitted to several mathematical models, and the effects of air temperature during drying were evaluated by multiple regression analyses, comparing to previously reported models. Models for drying conditions indicated a final water content of 30% (semidry products) and 15% (dry products) was achieved, comparing sun-drying and convective oven drying at three different temperatures. After 26–28 h of sun drying, the tomato tissue had reached a moisture content of 15%. However, less drying time, about 10–11 h, was needed when starting with an initial moisture content of 92%. The tomato tissue had high ORAC and polyphenol content values after convective oven drying at 60 °C. The dried tomato samples had a satisfactory taste, color and antioxidant values.

Heat and Mass Diffusion Including Shrinkage and Hygrothermal Stress during Drying of Holed Ceramics Bricks

2011 ◽  
Vol 312-315 ◽  
pp. 971-976 ◽  
Author(s):  
J. Barbosa da Silva ◽  
G. Silva Almeida ◽  
W.C.P. Barbosa de Lima ◽  
Gelmires Araújo Neves ◽  
Antônio Gilson Barbosa de Lima
Keyword(s):  
Moisture Content ◽  
Three Dimensional ◽  
Average Moisture Content ◽  
Stress Distributions ◽  
Drying Process ◽  
Convective Boundary ◽  
Volume Method ◽  
Hygrothermal Stress ◽  
Thermo Physical Properties ◽  
Good Agreement

The Aim of this Work Is to Present a Three-Dimensional Mathematical Modelling to Predict Heat and Mass Transport inside the Industrial Brick with Rectangular Holes during the Drying Including Shrinkage and Hygrothermalelastic Stress Analysis. the Numerical Solution of the Diffusion Equation, Being Used the Finite-Volume Method, Considering Constant Thermo-Physical Properties and Convective Boundary Conditions at the Surface of the Solid, it Is Presented and Analyzed. Results of the Temperature, Moisture Content and Stress Distributions, and Drying and Heating Kinetics Are Shown and Analyzed. Results of the Average Moisture Content and Surface Temperature of the Brick along the Drying Process Are Compared with Experimental Data (T = 80.0oC and RH = 4.6 %) and Good Agreement Was Obtained. it Was Verified that the Largest Temperature, Moisture Content and Stress Gradients Are Located in the Intern and External Vertexes of the Brick.

Study on Drying Characteristics of Microalgae under Different Conditions

2013 ◽  
Vol 724-725 ◽  
pp. 296-299
Author(s):  
Chun Xiang Chen ◽  
Xiao Qian Ma ◽  
Xiao Cong Li ◽  
Wei Ping Qin
Keyword(s):  
Moisture Content ◽  
Mass Loss ◽  
Fresh Water ◽  
Chlorella Vulgaris ◽  
Drying Process ◽  
Drying Time ◽  
Drying Characteristics ◽  
Second Stage ◽  
Drying System ◽  
Two Stages

To find out an alternative of coal saving, a kind of microalgae, Chlorella vulgaris (C. vulgaris) which is widespread in fresh water was studied by digital blast drying system. The effect of the moisture content, drying thickness and temperature on the drying process of C. vulgaris were investigated. The results indicated that when the drying temperature is high, the moisture content is low and the material thickness is small, the drying time is short. The drying process of C.vulgaris can be divided into two stages, and the mass loss is mainly occurred in the second stage . The results will provide guidance for design of drying process and dryer of microalgae.

Sign in / Sign up

Export Citation Format

Share Document