The Numerical Simulation of the Temperature Field When Pure Water Is Heated Using One-Dimensional Steady Heat Source

2018 ◽  
Vol 08 (12) ◽  
pp. 523-528
Author(s):  
文娟 韩
Keyword(s):  
Numerical Simulation ◽  
Temperature Field ◽  
Heat Source ◽  
Pure Water ◽  
One Dimensional ◽  
Steady Heat

Numerical Simulation Analysis on the Temperature Field in Indirect Selective Laser Sintering of 316L

2013 ◽  
Vol 711 ◽  
pp. 209-213 ◽  
Author(s):  
Nai Fei Ren ◽  
Lei Jia ◽  
Dian Wang
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Temperature Field ◽  
Heat Source ◽  
Simulation Analysis ◽  
Selective Laser Sintering ◽  
Element Model ◽  
Cyclic Loads ◽  
Physical Experiments ◽  
Key Points

Using APDL programming language, an appropriate finite element model is created and the moving cyclic loads of Gauss heat source are realized. From the detailed qualitative analysis of the results, the variety laws of temperature field in indirect SLS are obtained. Plot results at different moments, temperature cyclic curves of key points and the curves of depth of fusion and width of fusion on the set paths, are of important guiding significance for subsequent physical experiments.

scholarly journals Numerical Analysis of the Influence of Electrode Inclination on Temperature Distribution during GMAW Overlaying

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Jerzy Winczek ◽  
Marek Gucwa ◽  
Miloš Mičian ◽  
Krzysztof Makles
Keyword(s):  
Numerical Simulation ◽  
Temperature Field ◽  
Theoretical Model ◽  
Temperature Distribution ◽  
Numerical Analysis ◽  
Heat Source ◽  
Analytical Description ◽  
Source Model ◽  
Heat Source Model ◽  
Inclination Angles

In the work, an analysis of the influence of electrode inclination on the distribution of temperature in the weld overlaying has been conducted. In the analytical description of the temperature field, a volumetric heat source model with an inclined axis with respect to the direction of surfacing was adopted. In the numerical simulation, the own theoretical model of heat source, algorithm, and program performed in the Borland Delphi environment were used. In the calculation examples, different electrode inclination angles were adopted in relation to the welded plate, in the direction of surfacing, opposite to the direction of welding, and perpendicular to the weld bead.

Numerical Simulation on Electron Beam Welding Temperature Field of Al-Li Alloy

2011 ◽  
Vol 418-420 ◽  
pp. 1640-1646
Author(s):  
Shao Gang Wang ◽  
Kuang Yu ◽  
Li Xing
Keyword(s):  
Numerical Simulation ◽  
Temperature Field ◽  
Electron Beam ◽  
Heat Source ◽  
Welding Speed ◽  
Electron Beam Welding ◽  
Beam Power ◽  
Welding Parameters ◽  
Welding Temperature ◽  
Weld Width

The numerical simulation of electron beam welding temperature field for 2090 Al-Li alloy sheet of 2 mm thickness is conducted by using the ANSYS software. The combined model of Gauss surface heat source with cylindrical body heat source in linear attenuation is used according to the unique nail-shaped weld of electron beam welding joint, and the distribution cloud image of temperature field and the instantaneous weld thermal cycle curves of Al-Li alloy electron beam welding are obtained through calculation. The effect of welding parameters such as electron beam power and welding speed on the distribution of temperature field and weld width is investigated. Results show that electron beam welding has a very high rate of both temperature ascending and descending, and the rate of temperature ascending is higher than that of descending. With the increase of electron beam power or decrease of welding speed, the temperature of fusion zone elevates, and the weld width increases. The appearance of weld obtained through numerical simulation is greatly consistent with the practical welding.

Sign in / Sign up

Export Citation Format

Share Document