scholarly journals Temperature and muscle

1985 ◽  
Vol 115 (1) ◽  
pp. 333-344 ◽  
Author(s):  
A. F. Bennett
Keyword(s):  
Mechanical Performance ◽  
Muscle Performance ◽  
Temperature Dependent ◽  
Thermal Dependence ◽  
Rate Processes ◽  
Behavioural Performance ◽  
Q10 Values ◽  
Contraction And Relaxation

Rates of force development, contraction and relaxation of vertebrate skeletal muscle are temperature dependent with Q10 values of approximately 2. Maximal forces developed have a low or negative thermal dependence. The functional basis of these patterns is poorly understood. Muscle performance generally does not acclimate. There appears to have been some evolutionary adaptation among species and classes to different thermal regimes, such that muscles from cold-adapted species maintain better mechanical performance at low temperatures than do those from warm-adapted animals. However, rate processes remain strongly thermally dependent even in animals with low or variable body temperatures. This thermal dependence of muscle in vitro is reflected in behavioural performance: maximal force generation in vivo is temperature independent and time-dependent activities are more rapid at higher muscle temperatures.

Thermal dependence of muscle function

1984 ◽  
Vol 247 (2) ◽  
pp. R217-R229 ◽  
Author(s):  
A. F. Bennett
Keyword(s):  
Fiber Type ◽  
Force Generation ◽  
Maximal Velocity ◽  
Body Temperatures ◽  
Temperature Dependent ◽  
Thermal Dependence ◽  
Mammalian Muscle ◽  
Rate Processes ◽  
Q10 Values

Maximal isometric forces during both twitch and tetanus are largely temperature independent in muscles from both endothermic and ectothermic vertebrates. Anuran muscle can develop maximal force at lower temperatures than mammalian muscle. Tetanic tension is maximal at normally experienced body temperatures in a variety of animals, but twitch tension seldom is. Thermal dependence of twitch tension varies with muscle fiber type: tension decreases with increasing temperature in fast-twitch muscles and remains constant in slow-twitch muscles. In contrast to the low temperature dependence of force generation, rates of development of tension (time to peak twitch tension and tetanic rise time) and maximal velocity of shortening and power output are markedly temperature dependent, with average temperature coefficient (Q10) values of 2.0-2.5 Q10 values for rate processes of anuran muscle are only slightly lower than those of mammalian muscle. High body temperatures permit rapid rates of muscle contraction; animals active at low body temperatures do not achieve the maximal rate performance their muscles are capable of delivering. Thermal acclimation or hibernation does not appear to result in compensatory adjustments in either force generation or rate processes. In vivo, dynamic processes dependent on contractile rates are positively temperature dependent, although with markedly lower Q10 values than those of isolated muscle. Static force application in vivo is nearly temperature independent.

Inhibition of PKC phosphorylation of cTnI improves cardiac performance in vivo

2004 ◽  
Vol 286 (6) ◽  
pp. H2089-H2095 ◽  
Author(s):  
Brian B. Roman ◽  
Paul H. Goldspink ◽  
Elyse Spaite ◽  
Dalia Urboniene ◽  
Ron McKinney ◽  
...  
Keyword(s):  
Troponin I ◽  
Cardiac Contraction ◽  
Phosphorylation Sites ◽  
Developed Pressure ◽  
Contraction And Relaxation ◽  
Intracellular Targets ◽  
Camp Levels

Protein kinase C (PKC) modulates cardiomyocyte function by phosphorylation of intracellular targets including myofilament proteins. Data generated from studies on in vitro heart preparations indicate that PKC phosphorylation of troponin I (TnI), primarily via PKC-ε, may slow the rates of cardiac contraction and relaxation (+dP/d t and −dP/d t). To explore this issue in vivo, we employed transgenic mice [mutant TnI (mTnI) mice] in which the major PKC phosphorylation sites on cardiac TnI were mutated by alanine substitutions for Ser43 and Ser45 and studied in situ hemodynamics at baseline and increased inotropy. Hearts from mTnI mice exhibited increased contractility, as shown by a 30% greater +dP/dt and 18% greater −dP/d t than FVB hearts, and had a negligible response to isoproterenol compared with FVB mice, in which +dP/d t increased by 33% and −dP/d t increased by 26%. Treatment with phenylephrine and propranolol gave a similar result; FVB mouse hearts demonstrated a 20% increase in developed pressure, whereas mTnI mice showed no response. Back phosphorylation of TnI from mTnI hearts demonstrated that the mutation of the PKC sites was associated with an enhanced PKA-dependent phosphorylation independent of a change in basal cAMP levels. Our results demonstrate the important role that PKC-dependent phosphorylation of TnI has on the modulation of cardiac function under basal as well as augmented states and indicate interdependence of the phosphorylation sites of TnI in hearts beating in situ.

scholarly journals ATP:Mg2+ shapes condensate properties of rRNA-NPM1 in vitro nucleolus model and its partitioning of ribosomes

2021 ◽  
Author(s):  
N. Amy Yewdall ◽  
Alain A. M. André ◽  
Merlijn H. I. van Haren ◽  
Frank H. T. Nelissen ◽  
Aafke Jonker ◽  
...  
Keyword(s):  
Ribosomal Rna ◽  
Enzymatic Reaction ◽  
Atp Depletion ◽  
Gel Point ◽  
Dependent Manner ◽  
Biophysical Properties ◽  
Temperature Dependent ◽  
Quantitative Fluorescence

Nucleoli have viscoelastic gel-like condensate dynamics that are not well represented in vitro. Nucleoli models, such as those formed by nucleophosmin 1 (NPM1) and ribosomal RNA (rRNA), exhibit condensate dynamics orders of magnitude faster than in vivo nucleoli. Here we show that an interplay between magnesium ions (Mg2+) and ATP governs rRNA dynamics, and this ultimately shapes the physical state of these condensates. Using quantitative fluorescence microscopy, we demonstrate that increased RNA compaction occurs in the condensates at high Mg2+ concentrations, contributing to the slowed RNA dynamics. At Mg2+ concentrations above 7 mM, rRNA is fully arrested and the condensates are gels. Below the critical gel point, NPM1-rRNA droplets age in a temperature-dependent manner, suggesting that condensates are viscoelastic materials, undergoing maturation driven by weak multivalent interactions. ATP addition reverses the dynamic arrest of rRNA, resulting in liquefaction of these gel-like structures. Surprisingly, ATP and Mg2+ both act to increase partitioning of NPM1-proteins as well as rRNA, which influences the partitioning of small client molecules. By contrast, larger ribosomes form a halo around NPM1-rRNA coacervates when Mg2+ concentrations are higher than ATP concentrations. Within cells, ATP levels fluctuate due to biomolecular reactions, and we demonstrate that a dissipative enzymatic reaction can control the biophysical properties of in vitro condensates through depletion of ATP. This enzymatic ATP depletion also reverses the formation of the ribosome halos. Our results illustrate how cells, by changing local ATP concentrations, may regulate the state and client partitioning of RNA-containing condensates such as the nucleolus.

scholarly journals Mutations affecting the tRNA-splicing endonuclease activity of Saccharomyces cerevisiae.

Genetics ◽  
1988 ◽  
Vol 118 (4) ◽  
pp. 609-617
Author(s):  
M Winey ◽  
M R Culbertson
Keyword(s):  
Growth Defect ◽  
Temperature Sensitive ◽  
Gene Products ◽  
Endonuclease Activity ◽  
Temperature Dependent ◽  
Direct Role ◽  
Trna Splicing

Abstract Two unlinked mutations that alter the enzyme activity of tRNA-splicing endonuclease have been identified in yeast. The sen1-1 mutation, which maps on chromosome 12, causes temperature-sensitive growth, reduced in vitro endonuclease activity, and in vivo accumulation of unspliced pre-tRNAs. The sen2-1 mutation does not confer a detectable growth defect, but causes a temperature-dependent reduction of in vitro endonuclease activity. Pre-tRNAs do not accumulate in sen2-1 strains. The in vitro enzyme activities of sen1-1 and sen2-1 complement in extracts from a heterozygous diploid, but fail to complement in mixed extracts from separate sen1-1 and sen2-1 haploid strains. These results suggest a direct role for SEN gene products in the enzymatic removal of introns from tRNA that is distinct from the role of other products known to affect tRNA splicing.

Effect of dichloroacetate on mechanical performance and metabolism of compromised diaphragm muscle

1992 ◽  
Vol 72 (3) ◽  
pp. 1149-1155 ◽  
Author(s):  
B. P. deBoisblanc ◽  
K. Meszaros ◽  
A. Burns ◽  
G. J. Bagby ◽  
S. Nelson ◽  
...  
Keyword(s):  
Glucose Oxidation ◽  
Mechanical Performance ◽  
Lactate Production ◽  
Diaphragm Muscle ◽  
Tetanic Stimulation ◽  
Lactate Oxidation ◽  
Diaphragmatic Fatigue ◽  
Tension Generation

We investigated the effect of dichloroacetate (DCA) on tension generation and carbohydrate metabolism of the rat diaphragm in vitro. Isolated diaphragms were placed in individual organ chambers and were hooked to force-displacement transducers. Net lactate production and glucose and lactate oxidation were measured in vitro. Diaphragmatic fatigue was precipitated by in vivo endotoxemic shock, by in vitro hypoxia, or by in vitro repetitive tetanic stimulation. In diaphragms isolated from endotoxemic rats, DCA increased tension generation by 30 and 20% at stimulation frequencies of 20 and 100 Hz, respectively. Associated with changes in mechanical performance, DCA reduced net lactate production by 53% after 60 min of incubation and increased glucose oxidation 54% but had no effect on lactate oxidation. During in vitro hypoxia, DCA reduced net diaphragmatic lactate production by 30% and increased glucose oxidation by 45% but did not attenuate hypoxic fatigue. DCA had no effect on tension generation during repetitive tetanic stimulation. We conclude that DCA improves in vitro diaphragmatic fatigue due to endotoxicosis but not due to hypoxia or repetitive stimulation.

scholarly journals In Silico Performance of a Recellularized Tissue-Engineered Transcatheter Aortic Valve

2019 ◽  
Vol 141 (6) ◽  
Author(s):  
Christopher Noble ◽  
Joshua Choe ◽  
Susheil Uthamaraj ◽  
Milton Deherrera ◽  
Amir Lerman ◽  
...  
Keyword(s):  
Mechanical Behavior ◽  
Heart Valves ◽  
Mechanical Response ◽  
Mechanical Performance ◽  
Fe Analysis ◽  
Model Parameters ◽  
Biaxial Testing ◽  
Principal Stresses

Commercially available heart valves have many limitations, such as a lack of remodeling, risk of calcification, and thromboembolic problems. Many state-of-the-art tissue-engineered heart valves (TEHV) rely on recellularization to allow remodeling and transition to mechanical behavior of native tissues. Current in vitro testing is insufficient in characterizing a soon-to-be living valve due to this change in mechanical response; thus, it is imperative to understand the performance of an in situ valve. However, due to the complex in vivo environment, this is difficult to accomplish. Finite element (FE) analysis has become a standard tool for modeling mechanical behavior of heart valves; yet, research to date has mostly focused on commercial valves. The purpose of this study has been to evaluate the mechanical behavior of a TEHV material before and after 6 months of implantation in a rat subdermis model. This model allows the recellularization and remodeling potential of the material to be assessed via a simple and inexpensive means prior to more complex ovine orthotropic studies. Biaxial testing was utilized to evaluate the mechanical properties, and subsequently, constitutive model parameters were fit to the data to allow mechanical performance to be evaluated via FE analysis of a full cardiac cycle. Maximum principal stresses and strains from the leaflets and commissures were then analyzed. The results of this study demonstrate that the explanted tissues had reduced mechanical strength compared to the implants but were similar to the native tissues. For the FE models, this trend was continued with similar mechanical behavior in explant and native tissue groups and less compliant behavior in implant tissues. Histology demonstrated recellularization and remodeling although remodeled collagen had no clear directionality. In conclusion, we observed successful recellularization and remodeling of the tissue giving confidence to our TEHV material; however, the mechanical response indicates the additional remodeling would likely occur in the aortic/pulmonary position.

The influence of respiratory acid-base changes on muscle performance and excitability of the sarcolemma during strenuous intermittent hand grip exercise

2012 ◽  
Vol 112 (4) ◽  
pp. 571-579 ◽  
Author(s):  
M. Hilbert ◽  
V. Shushakov ◽  
N. Maassen
Keyword(s):  
Force Production ◽  
Respiratory Acidosis ◽  
Respiratory Alkalosis ◽  
Muscle Performance ◽  
Protective Effects ◽  
Acid Base ◽  
M Wave ◽  
Hand Grip

Acidification has been reported to provide protective effects on force production in vitro. Thus, in this study, we tested if respiratory acid-base changes influence muscle function and excitability in vivo. Nine subjects performed strenuous, intermittent hand grip exercises (10 cycles of 15 s of work/45 s of rest) under respiratory acidosis by CO2 rebreathing, alkalosis by hyperventilation, or control. The Pco2, pH, K+ concentration ([K+]), and Na+ concentration were measured in venous and arterialized blood. Compound action potentials (M-wave) were elicited to examine the excitability of the sarcolemma. The surface electromyogram (EMG) was recorded to estimate the central drive to the muscle. The lowest venous pH during the exercise period was 7.24 ± 0.03 in controls, 7.31 ± 0.05 with alkalosis, and 7.17 ± 0.04 with acidosis ( P < 0.001). The venous [K+] rose to similar maximum values in all conditions (6.2 ± 0.8 mmol/l). The acidification reduced the decline in contraction speed ( P < 0.001) but decreased the M-wave area to 73.4 ± 19.8% ( P < 0.001) of the initial value. After the first exercise cycle, the M-wave area was smaller with acidosis than with alkalosis, and, after the second cycle, it was smaller with acidosis than with the control condition ( P < 0.001). The duration of the M-wave was not affected. Acidification diminished the reduction in performance, although the M-wave area during exercise was decreased. Respiratory alkalosis stabilized the M-wave area without influencing performance. Thus, we did not find a direct link between performance and alteration of excitability of the sarcolemma due to changes in pH in vivo.

scholarly journals Novel methods for cold exposure of skeletal muscle in vivo and in vitro show temperature-dependent myokine production

2021 ◽  
Vol 98 ◽  
pp. 102930
Author(s):  
Solveig Krapf ◽  
Tiril Schjølberg ◽  
Lucia Asoawe ◽  
Susanna Kyllikki Honkanen ◽  
Eili Tranheim Kase ◽  
...  
Keyword(s):  
Skeletal Muscle ◽  
Cold Exposure ◽  
Temperature Dependent ◽  
Novel Methods

Mechanical performance of the isolated and perfused heart of the haemoglobinless Antarctic icefish Chionodraco hamatus (Lönnberg): effects of loading conditions and temperature

1991 ◽  
Vol 332 (1264) ◽  
pp. 191-198 ◽  
Keyword(s):  
Heart Rate ◽  
Mechanical Performance ◽  
Antarctic Fish ◽  
Structural Constraints ◽  
Heart Ventricle ◽  
Perfused Heart ◽  
Antarctic Icefish ◽  
Set Up

Scaling of heart ventricle mass and body mass in the haemoglobinless Antarctic fish Chionodraco hamatus Lönnberg shows a relationship similar to those reported for other ‘cardiomegalic ’ icefish ( Chaenocephalus aceratus and Channichthys rhinoceratus ). An in vitro preparation of the heart of C. hamatus was set up to investigate the mechanical performance of this heart at different preloads and afterloads. It appears that this heart is well adapted to working within a range of preloads varying from —0.07 to —0.04 kPa, while it is unable to sustain increases of afterloads higher than 3.0 kPa. As in other teleosts, heart rate is unaffected by changes in preload and afterload. Increase in temperature from 0.5 to 5.8 °C affects heart rate whereas stroke volume is unaffected. On the whole, the in vitro data are similar to those in vivo measured in another icefish, C. aceratus and show that the heart of C. hamatus works as a typical volume pump. This is discussed in relation to both the structural constraints related to the cardiac design of this icefish and the biology of this unique vertebrate.

Calcium Phosphate Biomaterials Composite Device: In-Vitro and In-Vivo Investigation

2007 ◽  
Vol 330-332 ◽  
pp. 835-838
Author(s):  
Aliassghar Tofighi ◽  
M. Sutaria
Keyword(s):  
Compressive Strength ◽  
Shear Strength ◽  
Calcium Phosphate ◽  
Powder Processing ◽  
Mechanical Performance ◽  
Processing Parameters ◽  
Allograft Bone ◽  
Nano Structure

Low crystalline apatite (LCA) and calcium phosphate cements (CPC) based on amorphous calcium phosphate and dicalcium phosphate dihydrate (1 to 1 ratio) were combined with bioresorbable PLGA copolymer (0 to 20 wt.%) for preparation of solid-formed devices. A pilot manufacturing based on powder processing techniques using isostatic pressure (44,000 psig) was conducted. Processing parameters such as isostatic pressure, temperature, times and device dimension were varied to achieve appropriate mechanical properties comparable to that of allograft bone dowel used as a gold standard in clinical application. The solid-form devices were characterized for physico-chemical and mechanical performance, as well as subjected to an in-vitro wet environment incubation at body temperature (37°C). Fluid diffusion was investigated to evaluate the fluid absorption (through microporosity) and the compressive strength of wet devices vs. incubation time (up to 30 days) was also studied. The shear strength and compressive strength of pure LCA dowels was respectively 26 and 122 MPa, which corresponds to a process densification of about 30%. The compressive strength was dramatically improved with addition of various amounts of copolymer. The maximum compressive strength of 180 MPa was obtained for dowels containing 10 wt.% copolymer. Calcium phosphate composite also increased the shear strength to about 42 MPa. These mechanical performances were significantly higher than that of allograft bone dowel (MD-II™), reported about 10 MPa. A pilot sheep interbody fusion of lumbar spine (L3/L4 and L4/L5) demonstrates mechanical integrity and intervertebral fusion at 6 months. LCA was found to be the most suitable CaP material because of its biocompatibility, chemical composition, nano-structure and high specific surface area that exhibits in-vivo biointegrity and cell mediated process.

Sign in / Sign up

Export Citation Format

Share Document