Multigrid Fracture-Stimulated Reservoir Volume Mapping Coupled with a Novel Mathematical Optimization Approach to Shale Reservoir Well and Fracture Design

2018 ◽  
pp. 215-236
Author(s):  
Ahmed Alzahabi ◽  
Mohamed Y. Soliman
Keyword(s):  
Mathematical Optimization ◽  
Optimization Approach ◽  
Stimulated Reservoir Volume ◽  
Reservoir Volume ◽  
Shale Reservoir

scholarly journals A numerical investigation on the performance of hydraulic fracturing in naturally fractured gas reservoirs based on stimulated rock volume

2020 ◽  
Vol 10 (8) ◽  
pp. 3333-3345
Author(s):  
Ali Al-Rubaie ◽  
Hisham Khaled Ben Mahmud
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Natural Fracture ◽  
Shear Stresses ◽  
Individual Element ◽  
Natural Fractures ◽  
Gas Reservoirs ◽  
Stimulated Reservoir Volume ◽  
Reservoir Volume ◽  
Naturally Fractured

Abstract All reservoirs are fractured to some degree. Depending on the density, dimension, orientation and the cementation of natural fractures and the location where the hydraulic fracturing is done, preexisting natural fractures can impact hydraulic fracture propagation and the associated flow capacity. Understanding the interactions between hydraulic fracture and natural fractures is crucial in estimating fracture complexity, stimulated reservoir volume, drained reservoir volume and completion efficiency. However, because of the presence of natural fractures with diffuse penetration and different orientations, the operation is complicated in naturally fractured gas reservoirs. For this purpose, two numerical methods are proposed for simulating the hydraulic fracture in a naturally fractured gas reservoir. However, what hydraulic fracture looks like in the subsurface, especially in unconventional reservoirs, remain elusive, and many times, field observations contradict our common beliefs. In this study, the hydraulic fracture model is considered in terms of the state of tensions, on the interaction between the hydraulic fracture and the natural fracture (45°), and the effect of length and height of hydraulic fracture developed and how to distribute induced stress around the well. In order to determine the direction in which the hydraulic fracture is formed strikethrough, the finite difference method and the individual element for numerical solution are used and simulated. The results indicate that the optimum hydraulic fracture time was when the hydraulic fracture is able to connect natural fractures with large streams and connected to the well, and there is a fundamental difference between the tensile and shear opening. The analysis indicates that the growing hydraulic fracture, the tensile and shear stresses applied to the natural fracture.

Analyzing the Impacts of Meshing and Grid Alignment in Dual-Porosity Dual-Permeability Upscaling

2021 ◽  
pp. 1-20
Author(s):  
Ziming Xu ◽  
Juliana Y. Leung
Keyword(s):  
Fracture Network ◽  
Fracture Plane ◽  
Fracture Density ◽  
Shape Factors ◽  
Stimulated Reservoir Volume ◽  
Reservoir Volume ◽  
Multiple Length Scales ◽  
Fracture Intensity ◽  
Cumulative Production ◽  
The Difference

Summary The discrete fracture network (DFN) model is widely used to simulate and represent the complex fractures occurring over multiple length scales. However, computational constraints often necessitate that these DFN models be upscaled into a dual-porositydual-permeability (DPDK) model and discretized over a corner-point grid system, which is still commonly implemented in many commercial simulation packages. Many analytical upscaling techniques are applicable, provided that the fracture density is high, but this condition generally does not hold in most unconventional reservoir settings. A particular undesirable outcome is that connectivity between neighboring fracture cells could be erroneously removed if the fracture plane connecting the two cells is not aligned along the meshing direction. In this work, we propose a novel scheme to detect such misalignments and to adjust the DPDK fracture parameters locally, such that the proper fracture connectivity can be restored. A search subroutine is implemented to identify any diagonally adjacent cells of which the connectivity has been erroneously removed during the upscaling step. A correction scheme is implemented to facilitate a local adjustment to the shape factors in the vicinity of these two cells while ensuring the local fracture intensity remains unaffected. The results are assessed in terms of the stimulated reservoir volume calculations, and the sensitivity to fracture intensity is analyzed. The method is tested on a set of tight oil models constructed based on the Bakken Formation. Simulation results of the corrected, upscaled models are closer to those of DFN simulations. There is a noticeable improvement in the production after restoring the connectivity between those previously disconnected cells. The difference is most significant in cases with medium DFN density, where more fracture cells become disconnected after upscaling (this is also when most analytical upscaling techniques are no longer valid); in some 2D cases, up to a 22% difference in cumulative production is recorded. Ignoring the impacts of mesh discretization could result in an unintended reduction in the simulated fracture connectivity and a considerable underestimation of the cumulative production.

Numerical Study on Mechanism and Parameters Optimization of Temporary Plugging by Particles in Wellbore

2021 ◽  
pp. 1-16
Author(s):  
Tao Zhang ◽  
Ming Li ◽  
Jianchun Guo ◽  
Haoran Gou ◽  
Kefan Mu
Keyword(s):  
Particle Size ◽  
Numerical Study ◽  
Optimal Operation ◽  
Parameters Optimization ◽  
Mass Ratio ◽  
Stimulated Reservoir Volume ◽  
Reservoir Volume ◽  
Pump Rate ◽  
Single Well ◽  
Operation Parameters

Summary The temporary plugging by particles in the wellbore can open new perforation clusters and increase stimulated reservoir volume, but the temporary plugging process of particles is not clear. Therefore, in this paper, we take an ultradeep well in the Tarim Basin as the research object and establish a numerical model based on the coupled computational fluid dynamics-discrete element technology (CFD-DEM) approach, which accurately describes the movement process and mechanism of the temporary plugging particles in the wellbore. Furthermore, the influence of flow rate, concentration of injected particles, and the injected mass ratio of particle size on the temporary plugging effect were studied, respectively. In addition, based on the results of the orthogonal experimental analysis, we obtained the pump rate as the primary factor affecting the effect of temporary plugging, and we recommended the optimal operation parameters for temporary plugging by particles in the field: The pump rate is 2 m3/min, the concentration of the injected temporary plugging particles is 20%, and the ratio of the mass of the injected temporary plugging particles with particle size 1 to 5 mm to the mass of the temporary plugging particles with particle size 5 to 10 mm is 3:1. Finally, a single well that had implemented temporary plugging by particles was used to verify the recommended optimal temporary plugging operation parameters. The research results of this paper provide important guidance and suggestions for the design of temporary plugging schemes on the field.

Sign in / Sign up

Export Citation Format

Share Document