Chapter 8Microwave Heating Technology

2015 ◽  
pp. 320-341
Keyword(s):  
2013 ◽  
Vol 58 (3) ◽  
pp. 919-922 ◽  
Author(s):  
K. Granat ◽  
B. Opyd ◽  
D. Nowak ◽  
M. Stachowicz ◽  
G. Jaworski

Abstract The paper describes preliminary examinations on establishing usefulness criteria of foundry tooling materials in the microwave heating technology. Presented are measurement results of permittivity and loss tangent that determine behaviour of the materials in electromagnetic field. The measurements were carried-out in a waveguide resonant cavity that permits precise determination the above-mentioned parameters by perturbation technique. Examined were five different materials designed for use in foundry tooling. Determined was the loss factor that permits evaluating usefulness of materials in microwave heating technology. It was demonstrated that the selected plastics meet the basic criterion that is transparency for electromagnetic radiation.


Alloy Digest ◽  
2013 ◽  
Vol 62 (10) ◽  

Abstract NIKROTHAL TE is a member of the Nikrothal family of alloys, which are one of two main types of electric-resistance alloys. Nickel-chromium (80Ni-20Cr, for example), developed around the turn of the century, was used as heating-element material in industrial furnaces and electric household appliances. Nikrothal alloys offer advantages in heating-element applications requiring very good mechanical properties in the hot state. This alloy is an attractive alternative to Nikrothal Alloys 40, 60, 70, and 80 (see Alloy Digest Ni-529, September 1997). This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming. Filing Code: Ni-710. Producer or source: Sandvik Heating Technology.


2020 ◽  
Vol 39 (1) ◽  
pp. 45-53 ◽  
Author(s):  
Siwen Tang ◽  
Rui Wang ◽  
Pengfei Liu ◽  
Qiulin Niu ◽  
Guoqing Yang ◽  
...  

AbstractWith the concern of the environment, green dry cutting technology is getting more and more attention and self-lubricating tool technology plays an important role in dry cutting. Due to the demand for high temperature performance of tools during dry cutting process, cemented carbide with Ni3Al as the binder phase has received extensive attention due to its excellent high temperature strength and high temperature oxidation resistance. In this paper, WC-TiC-Ni3Al-CaF2 graded self-lubricating material and tools were prepared by microwave heating method, and its microstructure, mechanical properties and cutting performance were studied. Results show that gradient self-lubricating material can be quickly prepared by microwave heating technology, and the strength is equivalent to that of conventional heating technology. CaF2 not only plays a role in self-lubrication, but also refines the grain of the material. A reasonable gradient design can improve the mechanical properties of the material. When the gradient distribution exponent is n1 = 2, the material has high mechanical properties. Cutting experiments show that the WC-TiC-Ni3Al-CaF2 functional gradient self-lubricating tool has better cutting performance than the homogeneous WC-TiC-Ni3Al hard alloys.


2021 ◽  
Author(s):  
Mihaela Vlaicu ◽  
Vasile Marius Nae ◽  
Patrick Christian Buerssner ◽  
Stefan Liviu Firu ◽  
Natalya Logashova

Abstract Paraffin represents one of the main case of failures and production losses which facing the entire oil industry. Prevention of paraffin deposition on the subsurface/surface equipment can be achieved by keeping the paraffin dissolved in crude oil or minimizing the adhesion or aggregation process of wax crystals. The paraffin problems which occur, conduct to gradual reduction of the tubular and pipelines internal diameter, restriction or valves blockages, and reduce the equipment capacity until the production is stop. Problems due to paraffin deposition varies and is different according with each commercial field, sometime the difference is from a well to well which producing from the same reservoir with different consistency. How we shall proceed? Before or after paraffin is field on the equipment? How could be avoid the future paraffin deposition? How long the selected method is proper for well ? The decision represents a combination based on oil's chemical & physical characteristics, well's behavior, method selected for prevention or elimination and combined with economic analysis and field experience. The paraffin inhibition applying is a common practice in OMV Petrom, which cover majority of the production wells. For the special wells, which the paraffin inhibition didn't provided satisfying results (multiple intervention due to paraffin deposition) was selected the Down Hole Heating technology (DHH) which was successfully tested in our company since 2014 thanks according with the yearly New Technology Program. The operating principle consists in heating the fluid volume from tubing using the heating cable which can be installed inside tubing, for NF and ESP wells or outside tubing for SRP or PCP wells. The cable is designed and located at the interval of wax crystallization appearance and heats the fluid to the temperature higher than the wax crystallization point (WAT). Since then, the DHH technology had an upward course, proven by high run life (highest value 2500 days / average 813 days) of the technology at the total 47 wells equipped, until this moment. Based on the successful results, recorded of 64% of old production wells equipped, it was decided to apply the technology at first completion of the new wells (36%), thus ensuring the protection of the new equipment. The paper offers an overview of DHH technology implementation, achievements, benefits and online monitoring of technology implementation starting with 2014 until today. The total impact shown a decreasing of no.of failures with 73,8%, the cost of intervention with 76,5%. The production losses decreased only with 5%, which certifies the fact that the technology helping production maintaining during the exploitation in comparison with production losses due paraffin issues recorded at wells without equipped with DHH technology. During 6 years of down hole heating technology application were developed candidate selection decision tree, monitoring the electrical efficiency, using the adaptability capacity of the technology from one well to another and integrate the temperature parameters in online monitoring system as part of digitalization concept of OMV Petrom, aspects which will be present in this article.


2020 ◽  
Vol 7 (3) ◽  
pp. 196-206
Author(s):  
Shunda Lin ◽  
Mamdouh Omran ◽  
Shenghui Guo

: Microwave heating technology is considered one of the most likely to replace traditional heating methods due to its efficient, quick, and green heating transmission that meets the requirements of sustainable development. Microwave heating can strengthen chemical reactions and change the morphology of minerals, and it can save energy and achieve rapid and efficient heating, clean production, and emission reduction. Therefore, this paper summarizes the research status of microwave heating in the recovery of valuable metals (Cu, Au, V),) from metallurgical waste ore and rare earth elements from rare earth minerals in recent years, expounds the principle of microwave heating, and summarizes the previous experimental phenomena. Finally, the development potential, opportunities, and difficulties of microwave technology in future industrial applications are discussed.


Author(s):  
Christian Windhoevel ◽  
Chendhil Periasamy ◽  
George Todd ◽  
Justin Wang ◽  
Bertrand Leroux ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document