Melting Behavior of Polypropylenes of Different Chemical Structure

2015 ◽  
pp. 51-60
Author(s):  
Yu Lukanina ◽  
A Khvatov ◽  
N Kolesnikova ◽  
A Popov
Keyword(s):  
Chemical Structure ◽  
Melting Behavior

The Effect of Cooling Rate during Crystallization on the Melting Behavior of Polypropylenes of Different Chemical Structure

2016 ◽  
Vol 10 (4) ◽  
pp. 479-483
Author(s):  
Yulia Lukanina ◽  
◽  
Anatoliy Khvatov ◽  
Natalya Kolesnikova ◽  
Anatoliy Popov ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Maleic Anhydride ◽  
Optical Microscopy ◽  
Cooling Rate ◽  
Chemical Structure ◽  
Chemical Nature ◽  
Main Chain ◽  
Crystallization Rate ◽  
Melting Behavior ◽  
Random Copolymers

The melting behavior of polypropylenes of different chemical structure (isotactic homopolypropylene, propylene-based block and random copolymers and maleic anhydride grafted polypropylene) was studied by differential scanning calorimeter (DSC) and optical microscopy. Melting behavior and the crystal structure of polypropylene and its copolymers were observed depending on the crystallization rate, chemical nature of co-monomer unites and regularity of co-monomer units arrangement in the polypropylene main chain.

Inelastic Electron-Matter Interactions

1978 ◽  
Vol 36 (3) ◽  
pp. 259-267
Author(s):  
J. Silcox
Keyword(s):  
Electron Microscope ◽  
Energy Loss ◽  
Chemical Structure ◽  
Inelastic Electron ◽  
Primary Concern ◽  
Unique Probe ◽  
Introductory Paper ◽  
Elastic Processes ◽  
Experimental Level ◽  
Inelastic Processes

In this introductory paper, my primary concern will be in identifying and outlining the various types of inelastic processes resulting from the interaction of electrons with matter. Elastic processes are understood reasonably well at the present experimental level and can be regarded as giving information on spatial arrangements. We need not consider them here. Inelastic processes do contain information of considerable value which reflect the electronic and chemical structure of the sample. In combination with the spatial resolution of the electron microscope, a unique probe of materials is finally emerging (Hillier 1943, Watanabe 1955, Castaing and Henri 1962, Crewe 1966, Wittry, Ferrier and Cosslett 1969, Isaacson and Johnson 1975, Egerton, Rossouw and Whelan 1976, Kokubo and Iwatsuki 1976, Colliex, Cosslett, Leapman and Trebbia 1977). We first review some scattering terminology by way of background and to identify some of the more interesting and significant features of energy loss electrons and then go on to discuss examples of studies of the type of phenomena encountered. Finally we will comment on some of the experimental factors encountered.

Chemical structure of diamond-like carbon thin films

1990 ◽  
Vol 48 (4) ◽  
pp. 710-711
Author(s):  
N.-H. Cho ◽  
K.M. Krishnan ◽  
D.B. Bogy
Keyword(s):  
Electrical Resistivity ◽  
Chemical Structure ◽  
Diamond Like Carbon ◽  
Chemical Structures ◽  
Sputtering Power ◽  
Data Aquisition ◽  
Equilibrium Phases ◽  
Electron Energy Loss ◽  
Power Densities ◽  
Preparation Techniques

Diamond-like carbon (DLC) films have attracted much attention due to their useful properties and applications. These properties are quite variable depending on film preparation techniques and conditions, DLC is a metastable state formed from highly non-equilibrium phases during the condensation of ionized particles. The nature of the films is therefore strongly dependent on their particular chemical structures. In this study, electron energy loss spectroscopy (EELS) was used to investigate how the chemical bonding configurations of DLC films vary as a function of sputtering power densities. The electrical resistivity of the films was determined, and related to their chemical structure.DLC films with a thickness of about 300Å were prepared at 0.1, 1.1, 2.1, and 10.0 watts/cm2, respectively, on NaCl substrates by d.c. magnetron sputtering. EEL spectra were obtained from diamond, graphite, and the films using a JEOL 200 CX electron microscope operating at 200 kV. A Gatan parallel EEL spectrometer and a Kevex data aquisition system were used to analyze the energy distribution of transmitted electrons. The electrical resistivity of the films was measured by the four point probe method.

Potential Uses of Vinegar as a Medicine and Related in vivo Mechanisms

2016 ◽  
Vol 86 (3-4) ◽  
pp. 127-151 ◽  
Author(s):  
Zeshan Ali ◽  
Zhenbin Wang ◽  
Rai Muhammad Amir ◽  
Shoaib Younas ◽  
Asif Wali ◽  
...  
Keyword(s):  
Chemical Structure ◽  
Review Paper ◽  
Heart Diseases ◽  
Folk Medicine ◽  
Active Role ◽  
Current Review ◽  
Different Types ◽  
Positive Effect

While the use of vinegar to fi ght against infections and other crucial conditions dates back to Hippocrates, recent research has found that vinegar consumption has a positive effect on biomarkers for diabetes, cancer, and heart diseases. Different types of vinegar have been used in the world during different time periods. Vinegar is produced by a fermentation process. Foods with a high content of carbohydrates are a good source of vinegar. Review of the results of different studies performed on vinegar components reveals that the daily use of these components has a healthy impact on the physiological and chemical structure of the human body. During the era of Hippocrates, people used vinegar as a medicine to treat wounds, which means that vinegar is one of the ancient foods used as folk medicine. The purpose of the current review paper is to provide a detailed summary of the outcome of previous studies emphasizing the role of vinegar in treatment of different diseases both in acute and chronic conditions, its in vivo mechanism and the active role of different bacteria.

Chemical structure of hyoscyamosides D and D1 - spirostanol glycosides from the seeds of Hyoscyamus niger L

Planta Medica ◽  
2008 ◽  
Vol 74 (09) ◽  
Author(s):  
I Lunga ◽  
P Kintia ◽  
S Shvets ◽  
C Bassarello ◽  
S Piacente ◽  
...  
Keyword(s):  
Chemical Structure ◽  
Hyoscyamus Niger

GAGs-Potentiated Inhibition of Thrombin, Factor Xa and Plasmin in Plasma and in a Purified System Containing Antithrombin III – Correlation with Total Charge Density

1981 ◽  
Vol 46 (04) ◽  
pp. 749-751 ◽  
Author(s):  
E Cofrancesco ◽  
A Vigo ◽  
E M Pogliani
Keyword(s):  
Charge Density ◽  
Chemical Structure ◽  
Antithrombin Iii ◽  
Factor Xa ◽  
Total Charge ◽  
Pure System ◽  
At Iii ◽  
Total Charge Density ◽  
The Difference ◽  
Inhibition Of Thrombin

SummaryThe ability of heparin and related glycosaminoglycans (GAGs) to accelerate the inhibition of thrombin, factor Xa and plasmin in plasma and in a purified system containing antithrombin III (At III) was studied using chromogenic peptide substrate assaysThere was a good correlation between the charge density of the mucopolysaccharides and the activities investigated. While the difference between potentiation of the antithrombin activity by GAGs in plasma and in the purified system was slight, the inhibition of factor Xa in plasma was more pronounced than in the presence of purified At III, indicating the mechanisms for GAGs-potentiated inhibition of thrombin and factor Xa are not identical.For the antiplasmin activity, there was a good correlation between the chemical structure and biological activity only in the pure system, confirming that the antithrombin-GAG complex plays a very limited role in the inactivation of plasmin in plasma.

Sign in / Sign up

Export Citation Format

Share Document