Tip leakage effect on wells turbine

2015 ◽  
pp. 555-560 ◽  
Author(s):  
P Halder ◽  
A Samad
Keyword(s):  
Wells Turbine ◽  
Tip Leakage ◽  
Leakage Effect

scholarly journals Effects of Tip Leakage Flow on the Aerodynamic Performance and Stability of an Axial-Flow Transonic Compressor Stage

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4168
Author(s):  
Botao Zhang ◽  
Xiaochen Mao ◽  
Xiaoxiong Wu ◽  
Bo Liu
Keyword(s):  
Boundary Layer ◽  
Shock Wave ◽  
Axial Flow ◽  
Leading Edge ◽  
Rotating Stall ◽  
Tip Clearance ◽  
Leakage Flow ◽  
Tip Leakage Flow ◽  
Tip Leakage ◽  
Transonic Compressor

To explain the effect of tip leakage flow on the performance of an axial-flow transonic compressor, the compressors with different rotor tip clearances were studied numerically. The results show that as the rotor tip clearance increases, the leakage flow intensity is increased, the shock wave position is moved backward, and the interaction between the tip leakage vortex and shock wave is intensified, while that between the boundary layer and shock wave is weakened. Most of all, the stall mechanisms of the compressors with varying rotor tip clearances are different. The clearance leakage flow is the main cause of the rotating stall under large rotor tip clearance. However, the stall form for the compressor with half of the designed tip clearance is caused by the joint action of the rotor tip stall caused by the leakage flow spillage at the blade leading edge and the whole blade span stall caused by the separation of the boundary layer of the rotor and the stator passage. Within the investigated varied range, when the rotor tip clearance size is half of the design, the compressor performance is improved best, and the peak efficiency and stall margin are increased by 0.2% and 3.5%, respectively.

scholarly journals Effect of in-service burnout effect on the transonic leakage flows over cavity tip model

2021 ◽  
pp. 095765092110121
Author(s):  
Zainab J Saleh ◽  
Eldad J Avital ◽  
Theodosios Korakianitis
Keyword(s):  
Turbine Blades ◽  
High Heat ◽  
Navier Stokes ◽  
Gas Temperature ◽  
Flow Measurements ◽  
Tip Leakage ◽  
Leakage Flows ◽  
Operational Life ◽  
Flow Interactions ◽  
Blade Tip

Increasing the gas temperature at the inlet to the high pressure turbine of gas turbine engines is known as a proven method to increase the efficiency of these engines. However, this will expose the blades’ surface to very high heat load and thermal damages. In the case of the un-shrouded turbine blades, the blade tip will be exposed to a significant thermal load due to the developed leakage flows in the tip gap, this leads to in-service burnout which degrades the blade tip and shortens its operational life. This paper studies the in-service burnout effect of the transonic tip flows over a cavity tip which is a configuration commonly used to reduce the tip leakage flows. This investigation is carried out experimentally within a transonic wind tunnel and computationally using steady and unsteady Reynolds Averaged Navier Stokes approaches. Various flow measurements are established and different flow behaviour including separation bubbles, shockwave development and distinct flow interactions are captured and discussed. It is found that when the tip is exposed to the in-service burnout, leakage flow behaves in a significantly different way. In addition, the effective tip gap becomes much larger and allows higher leakage mass flow rate in comparison to the sharp-edge tip (i.e. a tip at the beginning of its operational life). The tip leakage losses are found much higher for the round-edge cavity tip (i.e. a tip exposed to burn-out effect). Experimental and computational flow visualisations, surface pressure measurements and discharge coefficient variation are given and analysed for several pressure ratios across the tip gap.

Blade Lean and Tip Leakage Flows in Highly Loaded Compressor Cascades

2021 ◽  
Vol 30 (4) ◽  
pp. 1388-1405
Author(s):  
Zhiyuan Cao ◽  
Cheng Song ◽  
Xiang Zhang ◽  
Xi Gao ◽  
Bo Liu
Keyword(s):  
Tip Leakage ◽  
Leakage Flows ◽  
Tip Leakage Flows ◽  
Highly Loaded

The performance of Wells turbine under bi-directional airflow

2008 ◽  
Vol 33 (11) ◽  
pp. 2467-2474 ◽  
Author(s):  
A. Thakker ◽  
R. Abdulhadi
Keyword(s):  
Wells Turbine

Development of the Tip-Leakage Flow Downstream of a Planar Cascade of Turbine Blades: Vorticity Field

1989 ◽  
Author(s):  
M. Yaras ◽  
S. A. Sjolander
Keyword(s):  
Simple Model ◽  
Turbine Blades ◽  
Leakage Flow ◽  
Tip Leakage Flow ◽  
Vorticity Field ◽  
Trailing Edge ◽  
Tip Leakage ◽  
Blade Row ◽  
Axisymmetric Structure ◽  
Insight Into

The paper presents detailed measurements of the tip-leakage flow emerging from a planar cascade of turbine blades. Four clearances of from 1.5 to 5.5 percent of the blade chord are considered. Measurements were made at the trailing edge plane, and at two main planes 1.0 and 1.56 axial chord lengths downstream of the cascade. The results give insight into several aspects of the leakage flow including: the size and strength of the leakage vortex in relation to the size of the tip gap and the bound circulation of the blade; and the evolution of the components of vorticity as the vortex diffuses laterally downstream of the blade row. The vortex was found to have largely completed its roll-up into a nearly axisymmetric structure even at the trailing edge of the cascade. As a result, it was found that the vortex could be modelled surprisingly well with a simple model based on the diffusion of a line vortex.

Multiscale Partially Averaged Navier Stokes Approach for the Prediction of Flow in Linear Compressor Cascade With Moving Casing

2011 ◽  
Author(s):  
Domenico Borello ◽  
Giovanni Delibra ◽  
Franco Rispoli
Keyword(s):  
Turbulence Models ◽  
Navier Stokes ◽  
Test Case ◽  
Compressor Cascade ◽  
Preliminary Assessment ◽  
Linear Compressor ◽  
Tip Leakage ◽  
Experimental Campaign ◽  
Elliptic Relaxation ◽  
Linear Compressor Cascade

In this paper we present an innovative Partially Averaged Navier Stokes (PANS) approach for the simulation of turbomachinery flows. The elliptic relaxation k-ε-ζ-f model was used as baseline Unsteady Reynolds Averaged Navier Stokes (URANS) model for the derivation of the PANS formulation. The well established T-FlowS unstructured finite volume in-house code was used for the computations. A preliminary assessment of the developed formulation was carried out on a 2D hill flow that represents a very demanding test case for turbulence models. The turbomachinery flow here investigated reproduces the experimental campaign carried out at Virginia Tech on a linear compressor cascade with tip leakage. Their measurements were used for comparisons with numerical results. The predictive capabilities of the model were assessed through the analysis of the flow field. Then an investigation of the blade passage, where experiments were not available, was carried out to detect the main loss sources.

Study of the Standard k-ε Model for Tip Leakage Flow in an Axial Compressor Rotor

2016 ◽  
Vol 33 (4) ◽  
Author(s):  
Yanfei Gao ◽  
Yangwei Liu ◽  
Luyang Zhong ◽  
Jiexuan Hou ◽  
Lipeng Lu
Keyword(s):  
Flow Field ◽  
Large Scale ◽  
Turbulent Viscosity ◽  
Axial Compressor ◽  
Leakage Flow ◽  
Reynolds Stresses ◽  
Mean Flow ◽  
Tip Leakage Flow ◽  
Tip Leakage ◽  
Compressor Rotor

AbstractThe standard k-ε model (SKE) and the Reynolds stress model (RSM) are employed to predict the tip leakage flow (TLF) in a low-speed large-scale axial compressor rotor. Then, a new research method is adopted to “freeze” the turbulent kinetic energy and dissipation rate of the flow field derived from the RSM, and obtain the turbulent viscosity using the Boussinesq hypothesis. The Reynolds stresses and mean flow field computed on the basis of the frozen viscosity are compared with the results of the SKE and the RSM. The flow field in the tip region based on the frozen viscosity is more similar to the results of the RSM than those of the SKE, although certain differences can be observed. This finding indicates that the non-equilibrium turbulence transport nature plays an important role in predicting the TLF, as well as the turbulence anisotropy.

Sign in / Sign up

Export Citation Format

Share Document