The Magnetic Photocatalyst Conversion to the Magnetic Dye-Adsorbent Catalyst via Hydrothermal Followed by Typical Washing and Thermal Treatments

2015 ◽  
pp. 341-356
Keyword(s):  
Thermal Treatments ◽  
Magnetic Photocatalyst

Thermomechanical Treatment of a 4340 Ni-Cr-Mo Alloy Steel

1981 ◽  
Vol 39 ◽  
pp. 314-315 ◽  
Author(s):  
M.T. Jahn ◽  
J.C. Yang ◽  
C.M. Wan
Keyword(s):  
Mechanical Property ◽  
Chemical Composition ◽  
Alloy Steel ◽  
Thermomechanical Treatment ◽  
Room Temperature ◽  
Good Combination ◽  
Thermal Treatments ◽  
Low Carbon ◽  
4340 Steel ◽  
Good Improvement

4340 Ni-Cr-Mo alloy steel is widely used due to its good combination of strength and toughness. The mechanical property of 4340 steel can be improved by various thermal treatments. The influence of thermomechanical treatment (TMT) has been studied in a low carbon Ni-Cr-Mo steel having chemical composition closed to 4340 steel. TMT of 4340 steel is rarely examined up to now. In this study we obtain good improvement on the mechanical property of 4340 steel by TMT. The mechanism is explained in terms of TEM microstructures4340 (0.39C-1.81Ni-0.93Cr-0.26Mo) steel was austenitized at 950°C for 30 minutes. The TMTed specimen (T) was obtained by forging the specimen continuously as the temperature of the specimen was decreasing from 950°C to 600°C followed by oil quenching to room temperature. The thickness reduction ratio by forging is 40%. The conventional specimen (C) was obtained by quenching the specimen directly into room temperature oil after austenitized at 950°C for 30 minutes. All quenched specimens (T and C) were then tempered at 450, 500, 550, 600 or 650°C for four hours respectively.

TEM characterization of WSix films

1994 ◽  
Vol 52 ◽  
pp. 848-849
Author(s):  
V. C. Kannan ◽  
S. M. Merchant ◽  
R. B. Irwin ◽  
A. K. Nanda ◽  
M. Sundahl ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Vapor Deposition ◽  
High Purity ◽  
Physical Vapor Deposition ◽  
Thermal Treatments ◽  
Rapid Thermal Anneal ◽  
Tungsten Silicide ◽  
Tem Characterization ◽  
Metal Silicides

Metal silicides such as WSi2, MoSi2, TiSi2, TaSi2 and CoSi2 have received wide attention in recent years for semiconductor applications in integrated circuits. In this study, we describe the microstructures of WSix films deposited on SiO2 (oxide) and polysilicon (poly) surfaces on Si wafers afterdeposition and rapid thermal anneal (RTA) at several temperatures. The stoichiometry of WSix films was confirmed by Rutherford Backscattering Spectroscopy (RBS). A correlation between the observed microstructure and measured sheet resistance of the films was also obtained.WSix films were deposited by physical vapor deposition (PVD) using magnetron sputteringin a Varian 3180. A high purity tungsten silicide target with a Si:W ratio of 2.85 was used. Films deposited on oxide or poly substrates gave rise to a Si:W ratio of 2.65 as observed by RBS. To simulatethe thermal treatments of subsequent processing procedures, wafers with tungsten silicide films were subjected to RTA (AG Associates Heatpulse 4108) in a N2 ambient for 60 seconds at temperatures ranging from 700° to 1000°C.

Formation of Boundary Layer by Thermal Treatments in Mo/Si Stacking Layers.

1993 ◽  
Vol 5 (2) ◽  
pp. 26-31
Author(s):  
Tsutomu OGAWA ◽  
Munehiro MONDO ◽  
Hiroshi KUDO ◽  
Moriaki WAKAKI
Keyword(s):  
Boundary Layer ◽  
Thermal Treatments

Preparation of NiO–LiFeO2solid solutions: the role of mechanical and thermal treatments

2007 ◽  
Vol 98 (3) ◽  
pp. 205-208
Author(s):  
Vittorio Berbenni ◽  
Chiara Milanese ◽  
Gianna Bruni ◽  
Pacifico Cofrancesco ◽  
Amedeo Marini ◽  
...  
Keyword(s):  
Thermal Treatments

The Influence of the Soaking Process on Magnetization Saturation and Coercivity Field of the Classic Amorphous Alloy Fe61Co10Y8Nb1B20.

2018 ◽  
Vol 69 (10) ◽  
pp. 2819-2822
Author(s):  
Marcin Nabialek
Keyword(s):  
Magnetic Field ◽  
Saturation Magnetization ◽  
Coercive Field ◽  
Thermal Treatments ◽  
Solid Samples ◽  
Magnetization Saturation ◽  
Transmission Geometry ◽  
Negative Effect ◽  
Coercivity Field ◽  
The Magnetic Field

This study presents the results of Mossbauer research and magnetic properties. The tests were carried out for amorphous Fe61Co10Y8Nb1B20 alloys produced in the form of strips with a thickness of approximately 35 mm. Mossbauer spectra were measured in transmission geometry for solid samples. Measurements were taken for samples in solidified state and after two heating processes. The first process was carried out at 700K and 60 minutes, the second at 720K and 210 minutes. For the samples prepared in this way, magnetization tests were performed as a function of the magnetic field strength. The values of saturation magnetization and the value of the coercive field were determined from these matrices. It was found that the performed thermal treatments had a negative effect on the value of saturation magnetization and change in the value of the coercive field.

Infrared Spectroscopy Characterization of Marine Shells

2001 ◽  
Vol 711 ◽  
Author(s):  
Octavio Gomez-Martinez ◽  
Daniel H. Aguilar ◽  
Patricia Quintana ◽  
Juan J. Alvarado-Gil ◽  
Dalila Aldana ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Crassostrea Virginica ◽  
Thermal Treatments ◽  
Vibration Modes ◽  
Lattice Vibrations ◽  
Vibration Frequencies ◽  
Mussel Shells ◽  
Carbonate Lattice

ABSTRACTFourier Transform infrared spectroscopy has been employed to study the shells of two kind of mollusks, American oysters (Crassostrea virginica) and mussels (Ischadium recurvum). It is shown that it is possible to distinguish the different calcium carbonate lattice vibrations in each case, mussel shells present aragonite vibration frequencies, and the oyster shells present those corresponding to calcite. The superposition, shift and broadening of the infrared bands are discussed. Changes in the vibration modes due to successive thermal treatments are also reported.

scholarly journals The Influence of Temperature, Storage Conditions, pH, and Ionic Strength on the Antioxidant Activity and Color Parameters of Rowan Berry Extracts

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3786
Author(s):  
Elena Cristea ◽  
Aliona Ghendov-Mosanu ◽  
Antoanela Patras ◽  
Carmen Socaciu ◽  
Adela Pintea ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Ionic Strength ◽  
Organic Acids ◽  
Bioactive Compounds ◽  
Acid Methyl Ester ◽  
Storage Conditions ◽  
Raw Material ◽  
Thermal Treatments ◽  
Spectrophotometric Methods ◽  
Berry Extracts

Recent trends in the food industry combined with novel methods in agriculture could transform rowan into a valuable raw material with potential technological applications. Thus, the aim of this research was to investigate the content of bioactive compounds in its fruits and to assess the color and antioxidant stability of the extracts prepared from such fruits during various thermal treatments and at different pH and ionic strength values. Various spectrophotometric methods, HPLC, and capillary electrophoresis were used to quantify the concentrations of bioactive compounds—polyphenols, carotenoids, organic acids, and to assess antioxidant activity and color. The results show that rowan berries contain circa 1.34–1.47 g/100 g of polyphenols among which include catechin, epicatechin, ferulic acid methyl ester, procyanidin B1, etc.; ca 21.65 mg/100 g of carotenoids including zeaxanthin, β-cryptoxanthin, all-trans-β-carotene, and various organic acids such as malic, citric, and succinic, which result in a high antioxidant activity of 5.8 mmol TE/100 g. Results also showed that antioxidant activity exhibited high stability when the extract was subjected to various thermal treatments, pHs, and ionic strengths, while color was mainly impacted negatively when a temperature of 100 °C was employed. This data confirms the technological potential of this traditional, yet often overlooked species.

scholarly journals A multilevel investigation supported by multivariate analysis for tomato product formulation

2021 ◽  
Author(s):  
Fatma Boukid ◽  
Elena Curti ◽  
Agoura Diantom ◽  
Eleonora Carini ◽  
Elena Vittadini
Keyword(s):  
Thermal Treatment ◽  
Color Change ◽  
Water Molecules ◽  
Thermal Treatments ◽  
Industrial Processing ◽  
H Nmr ◽  
Mobile Populations ◽  
Product Formulation ◽  
Tomato Product ◽  
The Impact

AbstractIndustrial processing of tomato includes its cutting and mincing, thermal treatments, and the addition of ingredients, which might induce changes in physicochemical properties of the final products. In this frame, the impact of texturing/thickening [xanthan gum (X) or potato fiber (F)] on the macroscopic, mesoscopic and molecular properties of tomato double concentrate (TDC) was investigated to determine if F can efficiently substitute X, in association with small solutes (sugar and salt) and thermal treatment (cold and hot). At a macroscopic level, multivariate statistics (MANOVA) underlined that color change (ΔE) was increased by X and F addition contrary to heating and the addition of salt and sugar. MANOVA revealed that texture was greatly enhanced through the use of F over X. 1H NMR molecular mobility changes were more controlled by texturing agents (F and X) than thermal treatment and small solutes. Particularly F increased the more rigid population indicating stronger interaction with water molecules resulting in shear-thinning flow. However, adding X contributed into the increase of the dynamic and mobile populations. Therefore, F can be a valid “clean label” substitute of X in modulating tomato products properties.

Sign in / Sign up

Export Citation Format

Share Document