Solution Deposition Methods and Technologies: Research to Manufacturing

2015 ◽  
pp. 400-413
Keyword(s):  
Solution Deposition

scholarly journals Chemical Solution Deposition of La-Substituted BiFe0.5Sc0.5O3 Perovskite Thin Films on Different Substrates

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 307
Author(s):  
Diana Griesiute ◽  
Dovydas Karoblis ◽  
Lina Mikoliunaite ◽  
Aleksej Zarkov ◽  
Andrei N. Salak ◽  
...  
Keyword(s):  
Thin Films ◽  
Chemical Solution Deposition ◽  
Cost Effective ◽  
Deposition Process ◽  
Stability Study ◽  
Fused Silica ◽  
Chemical Solution ◽  
Solution Deposition ◽  
Optimal Annealing Temperature ◽  
Xrd Patterns

In the present work, polycrystalline Bi0.67La0.33Fe0.5Sc0.5O3 thin films were synthesized using a simple and cost-effective chemical solution deposition process employing the spin coating technique. In order to check the feasibility of the fabrication of thin films on various types of substrates, the films were deposited on Pt-coated silicon, silicon, sapphire, corundum, fused silica and glass. Based on the results of thermogravimetric analysis of precursor and thermal stability study, it was determined that the optimal annealing temperature for the formation of perovskite structure is 600 °C. It was observed that the relative intensity of the pseudocubic peaks (001)p and (011)p in the XRD patterns is influenced by the nature of substrates, suggesting that the formed crystallites have some preferred orientation. Roughness of the films was determined to be dependent on the nature of the substrate.

The effect of complexing agents in chemical solution deposition of metal chalcogenide thin films

2021 ◽  
Author(s):  
Sucheta Sengupta ◽  
Rinki Aggarwal ◽  
Yuval Golan
Keyword(s):  
Thin Films ◽  
Chemical Solution Deposition ◽  
Metal Ion ◽  
Chemical Deposition ◽  
Review Article ◽  
Complexing Agents ◽  
Chemical Solution ◽  
Solution Deposition ◽  
Metal Chalcogenide ◽  
Chalcogenide Thin Films

This review article gives an overview of different complexing agents used during chemical deposition of metal chalcogenide thin films and their role in controlling the resultant morphology by effective complexation of the metal ion.

Effect of pH of coating solution on the adhesion strength and corrosion resistance of hydroxyapatite and octacalcium phosphate coated WE43 alloy

2021 ◽  
pp. 088532822110125
Author(s):  
Tuyet Thi Anh Ngo ◽  
Sachiko Hiromoto ◽  
Linh Chi Do ◽  
Hanh Hong Pham ◽  
Le Hanh
Keyword(s):  
Corrosion Resistance ◽  
Adhesion Strength ◽  
Corrosion Current ◽  
Xrd Analysis ◽  
Octacalcium Phosphate ◽  
Solution Deposition ◽  
Chemical Solution Deposition Method ◽  
Before And After ◽  
Coating Layers ◽  
We43 Alloy

Hydroxyapatite (HAp) and octacalcium phosphate (OCP) layers were formed on Mg- 4mass% Y- 3mass% rare earth (WE43) alloy by a chemical solution deposition method at various pH values of pH 5.5, 6.2, 7.5, and 8.6. Adhesion strength of HAp and OCP layers was evaluated before and after immersing in a medium for 14 days by a pull-off test. The corrosion resistance of these coatings was measured by polarization tests performed in a simulated body fluid (SBF). XRD analysis demonstrated that HAp coating layers were formed at pH 7.5 and 8.6, while OCP coating layers were formed at pH 5.5 and 6.2. Adhesion test results showed that the as-coated pH7.5-HAp layer had the highest adhesion strength of 8.6 MPa, which was attributed to the very dense structure of the coating layer. The as-coated pH8.6-HAp layer showed the adhesion strength of 6.5 MPa. The adhesion strength of the as-coated pH5.5- and pH6.2-OCP layers was 3.9 and 7.1 MPa, respectively, that was governed by the thick and fragile property of the layers. After immersing in the medium for 14 days, the adhesion strength of pH7.5- and pH8.6-specimens decreased to 5.8 and 5.6 MPa, respectively. The pitting corrosion and formation of Mg(OH)2 under the HAp layers were responsible for the decrease of adhesion strength. The polarization tests in SBF at 37 °C showed that the corrosion current density decreased with the HAp and OCP coatings, indicating the improvement of the corrosion resistance of WE43 alloy. The HAp coatings improved the corrosion resistance more efficiently than the OCP coatings.

An optimized process for fabrication of SrBi2Ta2O9 thin films using a novel chemical solution deposition technique

1999 ◽  
Vol 14 (11) ◽  
pp. 4395-4401 ◽  
Author(s):  
Seung-Hyun Kim ◽  
D. J. Kim ◽  
K. M. Lee ◽  
M. Park ◽  
A. I. Kingon ◽  
...  
Keyword(s):  
Thin Films ◽  
Chemical Solution Deposition ◽  
Low Voltage ◽  
Ferroelectric Properties ◽  
Chemical Solution ◽  
Solution Deposition ◽  
Chemical Solution Deposition Method ◽  
Low Leakage ◽  
Low Leakage Current ◽  
Voltage Saturation

Ferroelectric SrBi2Ta2O9 (SBT) thin films on Pt/ZrO2/SiO2/Si were successfully prepared by using an alkanolamine-modified chemical solution deposition method. It was observed that alkanolamine provided stability to the SBT solution by retarding the hydrolysis and condensation rates. The crystallinity and the microstructure of the SBT thin films improved with increasing annealing temperature and were strongly correlated with the ferroelectric properties of the SBT thin films. The films annealed at 800 °C exhibited low leakage current density, low voltage saturation, high remanent polarization, and good fatigue characteristics at least up to 1010 switching cycles, indicating favorable behavior for memory applications.

Enhanced electrical conductivity of Au–LaNiO3 nanocomposite thin films by chemical solution deposition

RSC Advances ◽  
2015 ◽  
Vol 5 (94) ◽  
pp. 76783-76787 ◽  
Author(s):  
H. L. Wang ◽  
X. K. Ning ◽  
Z. J. Wang
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Electrical Properties ◽  
Chemical Solution Deposition ◽  
Nanocomposite Films ◽  
Chemical Solution ◽  
Solution Deposition ◽  
Nanocomposite Thin Films ◽  
One Step

Au–LaNiO3 (Au–LNO) nanocomposite films with 3.84 at% Au were firstly fabricated by one-step chemical solution deposition (CSD), and their electrical properties were investigated.

Chemical Solution Deposition of Lanthanum Zirconate Buffer Layers on Biaxially Textured Ni–1.7% Fe–3% W Alloy Substrates for Coated-conductor Fabrication

2002 ◽  
Vol 17 (6) ◽  
pp. 1543-1549 ◽  
Author(s):  
S. Sathyamurthy ◽  
M. Paranthaman ◽  
T. Aytug ◽  
B. W. Kang ◽  
P. M. Martin ◽  
...  
Keyword(s):  
Sol Gel ◽  
Rf Sputtering ◽  
Cube Texture ◽  
Dip Coating ◽  
Buffer Layers ◽  
Lanthanum Zirconate ◽  
Solution Deposition ◽  
Ybco Films ◽  
Current Densities ◽  
Gel Processing

Sol-gel processing of La2Zr2O7 (LZO) buffer layers on biaxially textured Ni–1.7% Fe–3% W alloy substrates using a continuous reel-to-reel dip-coating unit has been studied. The epitaxial LZO films obtained have a strong cube texture and uniform microstructure. The effects of increasing the annealing speed on the texture, microstructure, and carbon content retained in the film were studied. On top of the LZO films, epitaxial layers of yttria-stabilized zirconia and Ceria (CeO2) were deposited using rf sputtering, and YBa2Cu3Ox (YBCO) films were then deposited using pulsed laser deposition. Critical current densities (Jc) of 1.9 MA/cm2 at 77 K and self-field and 0.34 MA/cm2at 77 K and 0.5 T have been obtained on these films. These values are comparable to those obtained on YBCO films deposited on all-vacuum deposited buffer layers and the highest ever obtained using solution seed layers.

Sign in / Sign up

Export Citation Format

Share Document