Current Challenges in Reducing Membrane Fouling

2015 ◽  
pp. 374-395
Keyword(s):  
Membrane Fouling

Applied Research in Membrane Fouling in the Membrane Bioreactor Systems with Large-scale Equipment

2019 ◽  
Vol 1 (1) ◽  
pp. 1-10
Author(s):  
Kong Linghan ◽  
Zhao Weidian ◽  
Ran Deqin ◽  
Hui Bing ◽  
Lu Linguo ◽  
...  
Keyword(s):  
Membrane Fouling ◽  
Large Scale ◽  
Membrane Bioreactor ◽  
Applied Research

Coagulation/flocculation/ultrafiltration for natural organic matter removal in drinking water production

2004 ◽  
Vol 4 (5-6) ◽  
pp. 215-222 ◽  
Author(s):  
A.R. Costa ◽  
M.N. de Pinho
Keyword(s):  
Drinking Water ◽  
Organic Matter ◽  
Natural Organic Matter ◽  
Membrane Fouling ◽  
Membrane Filtration ◽  
Membrane Surface ◽  
Water Production ◽  
Cellulose Acetate Membranes ◽  
Wide Range ◽  
Drinking Water Production

Membrane fouling by natural organic matter (NOM), namely by humic substances (HS), is a major problem in water treatment for drinking water production using membrane processes. Membrane fouling is dependent on membrane morphology like pore size and on water characteristics namely NOM nature. This work addresses the evaluation of the efficiency of ultrafiltration (UF) and Coagulation/Flocculation/UF performance in terms of permeation fluxes and HS removal, of the water from Tagus River (Valada). The operation of coagulation with chitosan was evaluated as a pretreatment for minimization of membrane fouling. UF experiments were carried out in flat cells of 13.2×10−4 m2 of membrane surface area and at transmembrane pressures from 1 to 4 bar. Five cellulose acetate membranes were laboratory made to cover a wide range of molecular weight cut-off (MWCO): 2,300, 11,000, 28,000, 60,000 and 75,000 Da. Severe fouling is observed for the membranes with the highest cut-off. In the permeation experiments of raw water, coagulation prior to membrane filtration led to a significant improvement of the permeation performance of the membranes with the highest MWCO due to the particles and colloidal matter removal.

A rapid small scale evaluation of ultrafiltration performance for surface water treatment at Alcantarilha's water treatment works (Algarve, Portugal)

2004 ◽  
Vol 4 (5-6) ◽  
pp. 199-206
Author(s):  
M. Ribau Teixeira ◽  
H. Lucas ◽  
M.J. Rosa
Keyword(s):  
Water Treatment ◽  
Membrane Fouling ◽  
Conventional Treatment ◽  
Apparent Molecular Weight ◽  
Small Scale ◽  
Hydraulic Permeability ◽  
Scale Evaluation ◽  
Surface Water Treatment ◽  
Drinking Water Production ◽  
Pre Treatment

A rapid small-scale evaluation of ultrafiltration (UF) performance with and without physical–chemical pre-treatment was performed to up-grade the conventional treatment used for drinking water production in Alcantarilha's water treatment works, Algarve, Portugal. Direct UF and pre-ozonation/coagulation/flocculation/sedimentation/UF (O/C/F/S/UF) were evaluated using polysulphone membranes of different apparent molecular weight cut-off (MWCO) (15–47 kDa). The results indicated that (i) UF is an effective barrier against microorganisms, including virus larger than 80 nm; (ii) for surface waters with low to moderate SUVA values, direct UF performance is equivalent or better than the conventional treatment in terms of residual turbidity, while UV254 nm and TOC residuals require the use of O/C/F/S/UF; (iii) the permeate quality improves with the membrane apparent MWCO decrease, especially for the direct UF, although the conventional treatment performance is never reached using UF; (iv) membrane fouling and adsorption phenomena are more severe in direct UF than in O/C/F/S/UF sequence (pre-ozonation decreases the membrane foulants by decreasing their hydrophobicity) and these phenomena increase with the membrane hydraulic permeability and, particularly, with the membrane apparent MWCO.

Removal of Residual Nutrients and Chemical Additives From Secondary Sewage by Reverse osmosis

1975 ◽  
Vol 10 (1) ◽  
pp. 101-109
Author(s):  
H. Kirk Johnston ◽  
H.S. Lim
Keyword(s):  
Reverse Osmosis ◽  
Membrane Fouling ◽  
Pilot Plant ◽  
Waste Treatment ◽  
Iron Chloride ◽  
Treatment Technique ◽  
Chemical Additives ◽  
Cellulose Acetate Membranes ◽  
Municipal Wastewaters ◽  
Nutrient Solutions

Abstract The suitability of reverse osmosis as a renovation technique for the treatment of municipal wastewaters has been assessed. Cellulose acetate membranes capable of 70% and 90% NaCl rejections were employed in both laboratory and pilot plant studies to evaluate the efficiency of this technique in removing the residual precipitant chemicals generally employed in phosphorus removal programs (iron chloride, alum, and lime) and the nutrients (phosphates, nitrates and ammonia) characteristic of municipal wastewaters. Secondary sewage and raw sewage as well as prepared nutrient solutions were employed in the course of this program. Both laboratory and pilot plant studies indicated consistently outstanding removal efficiencies for the species examined, almost independent of the nature of the waste solutions being treated. Permeation of the purified effluent was subject to significant reductions due to membrane fouling. This characteristic was most pronounced for the more permeable (less selective) membranes. Routine chemical and physical cleanings enable satisfactory flux levels to be maintained, thereby suggesting that reverse osmosis may become a viable municipal waste treatment technique.

Nanofiltration of colored surface water: Quebec's experience

2003 ◽  
Vol 3 (5-6) ◽  
pp. 15-22
Author(s):  
P. Kouadio ◽  
M. Tétrault
Keyword(s):  
Drinking Water ◽  
Surface Water ◽  
Membrane Fouling ◽  
Pilot Scale ◽  
Operating Conditions ◽  
Quebec City ◽  
Water Regulation ◽  
Eastern Canada

Three colored surface water nanofiltration pilot-scale projects were conducted in the province of Quebec (eastern Canada), between November 2000 and March 2002, by the company H2O Innovation (2000) inc., for the municipalities of Lac Bouchette, Latulipe-et-Gaboury and Charlesbourg (now part of Quebec City). Results indicated that nanofiltration permeate quality has an advance on present drinking water regulation standard in Quebec, but important membrane fouling occurred. Fouling can be controlled by pretreatment and optimization of the operating conditions.

Predictability of fouling-potential of raw water for ultrafiltration membranes

2011 ◽  
Vol 11 (4) ◽  
pp. 481-489
Author(s):  
S. Krause ◽  
A. Obermayer
Keyword(s):  
Water Quality ◽  
Membrane Fouling ◽  
Large Scale ◽  
High Capacity ◽  
Raw Water ◽  
Ultrafiltration Membranes ◽  
Small Water ◽  
Lab Experiments ◽  
Flux Decline ◽  
Public Drinking Water

The public drinking water supply of southern Germany is characterized by a rather decentralized network. Due to the hydrogeological setting in these parts of Germany many of the small water works with an average capacity of 50 m3/h have to treat raw water extracted from karstic or cliffy aquifers. These raw waters tend to be contaminated with particles and pathogens acquired during snowmelt or after strong rainfalls. In the last decade ultrafiltration has become the technology of choice for the removal of the aforementioned contaminants. Flux decline caused by unanticipated membrane fouling is the main limitation for the application of ultrafiltration membranes. This paper describes how membrane fouling phenomena can be predicted by using a statistical approach based on data from large scale filtration systems in combination with field and lab experiments on raw water quality and membrane performance. The data defines water quality and respective fouling phenomena both in technical scale filtration plants and in lab experiments of eleven different raw waters. The method described here is more economically feasible for small water works when compared to typical pilot experiments that are used for high capacity water works.

Separation of Biologically Active Compounds by Membrane Operations

2017 ◽  
Vol 23 (2) ◽  
pp. 218-230 ◽  
Author(s):  
Xiaoying Zhu ◽  
Renbi Bai
Keyword(s):  
Energy Consumption ◽  
Bioactive Compounds ◽  
Membrane Fouling ◽  
Membrane Separation ◽  
Separation Efficiency ◽  
High Energy ◽  
Separation Processes ◽  
Membrane Processes ◽  
Separation Technology ◽  
Pressure Driven

Background: Bioactive compounds from various natural sources have been attracting more and more attention, owing to their broad diversity of functionalities and availabilities. However, many of the bioactive compounds often exist at an extremely low concentration in a mixture so that massive harvesting is needed to obtain sufficient amounts for their practical usage. Thus, effective fractionation or separation technologies are essential for the screening and production of the bioactive compound products. The applicatons of conventional processes such as extraction, distillation and lyophilisation, etc. may be tedious, have high energy consumption or cause denature or degradation of the bioactive compounds. Membrane separation processes operate at ambient temperature, without the need for heating and therefore with less energy consumption. The “cold” separation technology also prevents the possible degradation of the bioactive compounds. The separation process is mainly physical and both fractions (permeate and retentate) of the membrane processes may be recovered. Thus, using membrane separation technology is a promising approach to concentrate and separate bioactive compounds. Methods: A comprehensive survey of membrane operations used for the separation of bioactive compounds is conducted. The available and established membrane separation processes are introduced and reviewed. Results: The most frequently used membrane processes are the pressure driven ones, including microfiltration (MF), ultrafiltration (UF) and nanofiltration (NF). They are applied either individually as a single sieve or in combination as an integrated membrane array to meet the different requirements in the separation of bioactive compounds. Other new membrane processes with multiple functions have also been developed and employed for the separation or fractionation of bioactive compounds. The hybrid electrodialysis (ED)-UF membrane process, for example has been used to provide a solution for the separation of biomolecules with similar molecular weights but different surface electrical properties. In contrast, the affinity membrane technology is shown to have the advantages of increasing the separation efficiency at low operational pressures through selectively adsorbing bioactive compounds during the filtration process. Conclusion: Individual membranes or membrane arrays are effectively used to separate bioactive compounds or achieve multiple fractionation of them with different molecule weights or sizes. Pressure driven membrane processes are highly efficient and widely used. Membrane fouling, especially irreversible organic and biological fouling, is the inevitable problem. Multifunctional membranes and affinity membranes provide the possibility of effectively separating bioactive compounds that are similar in sizes but different in other physical and chemical properties. Surface modification methods are of great potential to increase membrane separation efficiency as well as reduce the problem of membrane fouling. Developing membranes and optimizing the operational parameters specifically for the applications of separation of various bioactive compounds should be taken as an important part of ongoing or future membrane research in this field.

Sign in / Sign up

Export Citation Format

Share Document