Effects of Nano Clay on Mechanical Properties of Aged Asphalt Mixture

2015 ◽  
pp. 65-80
Keyword(s):  
Mechanical Properties ◽  
Asphalt Mixture ◽  
Nano Clay ◽  
Aged Asphalt

scholarly journals A Comprehensive Evaluation of Rejuvenator on Mechanical Properties, Durability, and Dynamic Characteristics of Artificially Aged Asphalt Mixture

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1554 ◽  
Author(s):  
Pan Pan ◽  
Yi Kuang ◽  
Xiaodi Hu ◽  
Xiao Zhang
Keyword(s):  
Mechanical Properties ◽  
Dynamic Characteristics ◽  
Comprehensive Evaluation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Physical Property ◽  
Fatigue Property ◽  
Physical Test ◽  
Aged Asphalt

In this study, the aged asphalt binder and mixture were laboratory prepared through short-term ageing testing and long-term ageing testing. Firstly, the effect of rejuvenator on physical properties of aged asphalt binders was investigated. In addition, a series of laboratory tests were performed to evaluate the influence of ageing and rejuvenator content on the mechanical properties, durability and dynamic characteristics of asphalt mixtures. Physical test results of asphalt binder testified that rejuvenator used can efficiently recover the aged asphalt binder. However, the effect of ageing and rejuvenator content exhibits different trends depending on the physical property tests conducted. Moreover, artificially aged asphalt mixture with rejuvenator has better ability to resist moisture damage and ravelling. In addition, the ITSR value is more suitable to evaluate the moisture susceptibility for asphalt recycling. Although rejuvenator improves the thermal cracking resistance and fatigue property of aged asphalt mixture, rejuvenated mixture shows greater modulus and inferior ability to resist reflective cracking than the unaged mixture. Moreover, rejuvenated mixture shows less dependence on frequency at high temperature regions and stronger dependence at low temperature regions compared to unaged and long-term aged mixtures.

Morphology and Mechanical Properties of Polyethylene Terephthalate/Ethylene Propylene Diene Monomer (PET/EPDM) in the Presence of Nanoclay

2020 ◽  
Vol 57 (3) ◽  
pp. 249-259
Author(s):  
Baifen Liu ◽  
Mohammad Mirjalili ◽  
Peiman Valipour ◽  
Sajad Porzal ◽  
shirin Nourbakhsh
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Thermal Destruction ◽  
Processing Temperature ◽  
Tem Analysis ◽  
Maximum Stiffness ◽  
Cloisite 30B ◽  
Nano Clay ◽  
The Matrix ◽  
Sample Maximum

This research deals with the mechanical properties, microstructure, and interrelations of triple nanocomposite based on PET/EPDM/Nanoclay. These properties were examined in different percentages of PET/EPDM blend with compatibilizer (Styrene-Ethylene/Butylene-Styrene)-G-(Maleic anhydrate) (SEBS-g-MAH). Results showed that the addition of 15% SEBS-g-MAH improved the toughness and impact strength of this nanocomposite. SEM micrographs indicated the most stable fuzzy microstructure in a 50/50 mixture of scattered phases of EPDM/SEBS-g-MAH. The effects of percentages of 1, 3, 5, 7 nanoclay Cloisite 30B (C30B) on the improvement of the properties were evaluated. With the addition of nano clay, the toughness and impact strength was reduced. Thermal destruction of nanoclay in processing temperature led to the decreasing dispersion of clay plates in the matrix and a reduction in the distances of nano clay plates in the composite compared to pure nano clay. XRD and TEM analysis was used to demonstrate the results. By adding 1% of nanoclay to the optimal sample, maximum stiffness, and Impact strength, among other nanocomposites, was achieved.

Effect of Nano Clay on Mechanical Behavior of Bamboo Fiber Reinforced Polyester Composites

2018 ◽  
Vol 877 ◽  
pp. 294-298 ◽  
Author(s):  
Kundan Patel ◽  
Jay Patel ◽  
Piyush Gohil ◽  
Vijaykumar Chaudhary
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Clay Content ◽  
Weight Fraction ◽  
Industrial Applications ◽  
Vital Role ◽  
Bamboo Fiber ◽  
Nano Clay ◽  
Different Types ◽  
Polyester Composite

Composite materials play a vital role in many industrial applications. Researchers are working on fabrication of new composite materials worldwide to enhance the applicability of these materials. The present study aimed to investigate the effect of Nano clay loading as filler on the mechanical properties of the bamboo fiber yarn reinforced polyester composite. Five different types of composite specimen were prepared with Nano clay loadings of 0 to 4 % weight fraction using hand lay-up technique. It was observed that the composite sheet with 1 wt % nano clay content exhibited the optimized tensile and flexural strength. However the mechanical properties tend to decrease with addition of nano clay content from 2 to 4 wt %. In spite of that the values of mechanical properties with 2 and 3 wt % nano clay content is higher than 0 wt % nano clay content.

scholarly journals 3D-printable zwitterionic nano-composite hydrogel system for biomedical applications

2020 ◽  
Vol 11 ◽  
pp. 204173142096729
Author(s):  
Nathalie Sällström ◽  
Andrew Capel ◽  
Mark P Lewis ◽  
Daniel S Engstrøm ◽  
Simon Martin
Keyword(s):  
Mechanical Properties ◽  
Biomedical Applications ◽  
Culture Medium ◽  
Careful Selection ◽  
Nano Composite ◽  
Significant Difference ◽  
Nano Clay ◽  
Hydrogel Surface ◽  
Selection Of ◽  
Hydrogel System

Herein, the cytotoxicity of a novel zwitterionic sulfobetaine hydrogel system with a nano-clay crosslinker has been investigated. We demonstrate that careful selection of the composition of the system (monomer to Laponite content) allows the material to be formed into controlled shapes using an extrusion based additive manufacturing technique with the ability to tune the mechanical properties of the product. Moreover, the printed structures can support their own weight without requiring curing during printing which enables the use of a printing-then-curing approach. Cell culture experiments were conducted to evaluate the neural cytotoxicity of the developed hydrogel system. Cytotoxicity evaluations were conducted on three different conditions; a control condition, an indirect condition (where the culture medium used had been in contact with the hydrogel to investigate leaching) and a direct condition (cells growing directly on the hydrogel). The result showed no significant difference in cell viability between the different conditions and cells were also found to be growing on the hydrogel surface with extended neurites present.

Sign in / Sign up

Export Citation Format

Share Document