The modeling of the separation process in a ferrohydrostatic separator using discrete element method

2004 ◽  
pp. 119-126 ◽  
Author(s):  
V Murariu ◽  
J Svoboda ◽  
P Sergeant
Keyword(s):  
Discrete Element Method ◽  
Discrete Element ◽  
Separation Process ◽  
Element Method

scholarly journals Modelling of the Separation Process in a Ferrohydrostatic Separator Using Discrete Element Method

2007 ◽  
Vol 2007 ◽  
pp. 1-13 ◽  
Author(s):  
V. Murariu ◽  
P. J. Sergeant
Keyword(s):  
Discrete Element Method ◽  
Flow Behavior ◽  
Discrete Element ◽  
Separation Process ◽  
Spherical Particles ◽  
Particle Flow Code ◽  
Complex Flow ◽  
De Beers ◽  
Simulation Parameters ◽  
Element Method

This paper presents a model of the separation process in a ferrohydrostatic separator (FHS) which has been designed and developed at DBGS, De Beers, South Africa. The model was developed using special discrete element method software package called Particle Flow Code in 3D (PFC3D). Special attention has been paid to the selection of the simulation parameters in order to achieve the required feed rates. The simulation was carried out using spherical particles and density tracers of different sizes and densities ranging between 0.004 and 0.008 m and 2700 and 3800 kg/m3, respectively. The tracers were used to set the apparent density of the ferrofluid (the cut-point) and to provide a measurement of the efficiency of the separation. The model is replacing the ferrofluid by imposing a drag force on the particle. The results of the simulation were presented in the form of the distribution of the density tracers into the sink fraction. These results are realistic and show the advantages of DEM to understand the complex flow behavior of granular materials.

Discrete element method to model cracking for two layer systems

TAPPI Journal ◽  
2019 ◽  
Vol 18 (2) ◽  
pp. 101-108
Author(s):  
Daniel Varney ◽  
Douglas Bousfield
Keyword(s):  
Discrete Element Method ◽  
Flexural Modulus ◽  
Single Layer ◽  
Discrete Element ◽  
Flexural Stress ◽  
Layer System ◽  
Three Point Bending ◽  
Moving Force ◽  
Coating Layers ◽  
Element Method

Cracking at the fold is a serious issue for many grades of coated paper and coated board. Some recent work has suggested methods to minimize this problem by using two or more coating layers of different properties. A discrete element method (DEM) has been used to model deformation events for single layer coating systems such as in-plain and out-of-plain tension, three-point bending, and a novel moving force picking simulation, but nothing has been reported related to multiple coating layers. In this paper, a DEM model has been expanded to predict the three-point bending response of a two-layer system. The main factors evaluated include the use of different binder systems in each layer and the ratio of the bottom and top layer weights. As in the past, the properties of the binder and the binder concentration are input parameters. The model can predict crack formation that is a function of these two sets of factors. In addition, the model can predict the flexural modulus, the maximum flexural stress, and the strain-at-failure. The predictions are qualitatively compared with experimental results reported in the literature.

Discrete element method–computational fluid dynamics analyses of flexible fibre fluidization

2021 ◽  
Vol 910 ◽  
Author(s):  
Yiyang Jiang ◽  
Yu Guo ◽  
Zhaosheng Yu ◽  
Xia Hua ◽  
Jianzhong Lin ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Discrete Element Method ◽  
Discrete Element ◽  
Dynamics Analyses ◽  
Element Method

Abstract

scholarly journals Numerical simulation on coal loading process of shearer drum based on discrete element method

2021 ◽  
pp. 014459872110135
Author(s):  
Zhen Tian ◽  
Shuangxi Jing ◽  
Lijuan Zhao ◽  
Wei Liu ◽  
Shan Gao
Keyword(s):  
Numerical Simulation ◽  
Discrete Element Method ◽  
Loading Rate ◽  
Low Cost ◽  
Element Model ◽  
Discrete Element ◽  
Helix Angle ◽  
Loading Process ◽  
Coal Particles ◽  
Element Method

The drum is the working mechanism of the coal shearer, and the coal loading performance of the drum is very important for the efficient and safe production of coal mine. In order to study the coal loading performance of the shearer drum, a discrete element model of coupling the drum and coal wall was established by combining the results of the coal property determination and the discrete element method. The movement of coal particles and the mass distribution in different areas were obtained, and the coal particle velocity and coal loading rate were analyzed under the conditions of different helix angles, rotation speeds, traction speeds and cutting depths. The results show that with the increase of helix angle, the coal loading first increases and then decreases; with the increase of cutting depth and traction speed, the coal loading rate decreases; the increase of rotation speed can improve the coal loading performance of drum to a certain extent. The research results show that the discrete element numerical simulation can accurately reflect the coal loading process of the shearer drum, which provides a more convenient, fast and low-cost method for the structural design of shearer drum and the improvement of coal loading performance.

Sign in / Sign up

Export Citation Format

Share Document