Fundamental Mechanisms of Cell Nucleation in Plastic Foam Processing

2014 ◽  
pp. 136-181
Keyword(s):  
Plastic Foam ◽  
Cell Nucleation

Treatment of Different Wastewaters from Pulp and Paper Industry in Methane Reactors

1985 ◽  
Vol 17 (1) ◽  
pp. 223-230 ◽  
Author(s):  
P K Latola
Keyword(s):  
Power Plant ◽  
Paper Industry ◽  
Granular Sludge ◽  
Paper Mill ◽  
Pulp And Paper Industry ◽  
Pulp And Paper ◽  
Plastic Foam ◽  
Loading Rates ◽  
Multi Stage ◽  
Removal Efficiencies

A wastewater from an integrated paper mill with a COD of 1200 mg/dm3 was anaerobically treated in a multi-stage reactor. The BOD7 removal efficiencies of 60-75 % were achieved at maximal loading rates of 5-6 kg COD/m3d and HRT of 4-6 hours due to the granular sludge. Industrial sulphite evaporator condensates from Ca- and Na-processes were treated in anaerobic filters containing light gravel, plastic foam and power plant slag as filter media. The BOD7 removals of 78 % on average were achieved at loading rates of 1.8-3.3 kg COD/m3d with Ca-process evaporator condensates and 80 % BOD7 removals were achieved with Na-process condensates at loading rates of 3.5-4.1 kg COD/m3d.

scholarly journals Effect of Compatibility on the Foaming Behavior of Injection Molded Polypropylene and Polycarbonate Blend Parts

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 300 ◽  
Author(s):  
Bei Su ◽  
Ying-Guo Zhou ◽  
Bin-Bin Dong ◽  
Cao Yan
Keyword(s):  
Morphological Structure ◽  
Potential Method ◽  
Grafted Polymers ◽  
Dynamic Mechanical Analyzer ◽  
Blowing Agent ◽  
Cell Nucleation ◽  
Foaming Behavior ◽  
Thermal Features ◽  
Injection Molded ◽  
Scanning Electron

To improve the foaming behavior of a common linear polypropylene (PP) resin, polycarbonate (PC) was blended with PP, and three different grafted polymers were used as the compatibilizers. The solid and foamed samples of the PP/PC 3:1 blend with different compatibilizers were first fabricated by melt extrusion followed by injection molding (IM) with and without a blowing agent. The mechanical properties, thermal features, morphological structure, and relative rheological characterizations of these samples were studied using a tensile test, dynamic mechanical analyzer (DMA), scanning electron microscope (SEM), and torque rheometer. It can be found from the experimental results that the influence of the compatibility between the PP and PC phases on the foaming behavior of PP/PC blends is substantial. The results suggest that PC coupling with an appropriate compatibilizer is a potential method to improve the foamability of PP resin. The comprehensive effect of PC and a suitable compatibilizer on the foamability of PP can be attributed to two possible mechanisms, i.e., the partial compatibility between phases that facilitates cell nucleation and the improved gas-melt viscosity that helps to form a fine foaming structure.

A study of cell nucleation in the extrusion of polypropylene foams

1997 ◽  
Vol 37 (1) ◽  
pp. 1-10 ◽  
Author(s):  
Chul B. Park ◽  
Lewis K. Cheung
Keyword(s):  
Cell Nucleation

Closure to “Local Failure of Plastic-Foam Core Sandwich Panels”

1970 ◽  
Vol 96 (8) ◽  
pp. 1803-1805
Author(s):  
Billy J. Harris ◽  
Gene M. Nordby
Keyword(s):  
Sandwich Panels ◽  
Local Failure ◽  
Foam Core ◽  
Plastic Foam

Local Failure of Plastic-Foam Core Sandwich Panels

1969 ◽  
Vol 95 (4) ◽  
pp. 585-610
Author(s):  
Billy J. Harris ◽  
Gene M. Nordby
Keyword(s):  
Sandwich Panels ◽  
Local Failure ◽  
Foam Core ◽  
Plastic Foam

The Role of Chlorine in Stratospheric Chemistry

1996 ◽  
Vol 68 (9) ◽  
pp. 1749-1756 ◽  
Author(s):  
M. J. Molina
Keyword(s):  
Laboratory Experiments ◽  
Stratospheric Ozone ◽  
The Sun ◽  
Plastic Foam ◽  
Model Calculations ◽  
Stratospheric Chemistry ◽  
Blowing Agents ◽  
Stratospheric Ozone Layer ◽  
The Earth

The chlorofluorocarbons (CFCs) are industrialchemicals used as solvents, refrigerants, plastic foam blowing agents,etc. These compounds are eventually released to the environment; theyslowly drift into the stratosphere, where they decompose, initiatinga catalytic process involving chlorine free radicals and leading toozone destruction. The stratospheric ozone layer is important for theearth's energy budget, and it shields the surface of the earth fromultraviolet radiation from the sun. Very significant depletion of theozone layer has been observed in the spring months over Antarctica duringthe last 10-15 years. Laboratory experiments, model calculations andfield measurements, which include several aircraft expeditions, haveyielded a wealth of information which clearly points to the CFCs asthe main cause of this depletion.

scholarly journals Advancing Plastic Foam Technology

Seikei-Kakou ◽  
2018 ◽  
Vol 30 (6) ◽  
pp. 223-223
Author(s):  
Masahiro Ohshima
Keyword(s):  
Plastic Foam
Sign in / Sign up

Export Citation Format

Share Document