Rendering and Surface Models

2016 ◽  
pp. 283-328
Keyword(s):  
Surface Models

Elemental chlorine-free bleaching of North American hardwood kraft pulps: Evaluation of oxidant-reinforced extraction variables on overall bleaching optimization

TAPPI Journal ◽  
2013 ◽  
Vol 12 (10) ◽  
pp. 33-41 ◽  
Author(s):  
BRIAN N. BROGDON
Keyword(s):  
Response Surface ◽  
Chlorine Dioxide ◽  
North American ◽  
Yield Loss ◽  
Alkaline Extraction ◽  
Kraft Pulps ◽  
Pulp Bleaching ◽  
Response Surface Models ◽  
Elemental Chlorine ◽  
Surface Models

This investigation evaluates how higher reaction temperatures or oxidant reinforcement of caustic extraction affects chlorine dioxide consumption during elemental chlorine-free bleaching of North American hardwood pulps. Bleaching data from the published literature were used to develop statistical response surface models for chlorine dioxide delignification and brightening sequences for a variety of hardwood pulps. The effects of higher (EO) temperature and of peroxide reinforcement were estimated from observations reported in the literature. The addition of peroxide to an (EO) stage roughly displaces 0.6 to 1.2 kg chlorine dioxide per kilogram peroxide used in elemental chlorine-free (ECF) bleach sequences. Increasing the (EO) temperature by Δ20°C (e.g., 70°C to 90°C) lowers the overall chlorine dioxide demand by 0.4 to 1.5 kg. Unlike what is observed for ECF softwood bleaching, the presented findings suggest that hot oxidant-reinforced extraction stages result in somewhat higher bleaching costs when compared to milder alkaline extraction stages for hardwoods. The substitution of an (EOP) in place of (EO) resulted in small changes to the overall bleaching cost. The models employed in this study did not take into account pulp bleaching shrinkage (yield loss), to simplify the calculations.

Data post processing

2018 ◽  
Author(s):  
Serge A. Wich ◽  
Lian Pin Koh
Keyword(s):  
Land Cover ◽  
Structure From Motion ◽  
Land Cover Classification ◽  
Post Processing ◽  
Surface Models

This chapter discusses how data that have been collected with drones can be used to derive orthomosaics and digital surface models through structure-from-motion software and how these can be processed further for land-cover classification or into vegetation metrics. Some examples of the various programs are provided as well. The chapter ends with a discussion on the approaches that have been used to automate counts of animals in drone images.

The Visible Korean: movable surface models of the hip joint

2021 ◽  
Vol 43 (4) ◽  
pp. 559-566
Author(s):  
Chung Yoh Kim ◽  
Yong Wook Jung ◽  
Jin Seo Park
Keyword(s):  
Hip Joint ◽  
Surface Models

scholarly journals Eco‐evolutionary optimality as a means to improve vegetation and land‐surface models

2021 ◽  
Author(s):  
Sandy P. Harrison ◽  
Wolfgang Cramer ◽  
Oskar Franklin ◽  
Iain Colin Prentice ◽  
Han Wang ◽  
...  
Keyword(s):  
Land Surface ◽  
Land Surface Models ◽  
Surface Models ◽  
Evolutionary Optimality

scholarly journals Metric Accuracy Evaluation of Dense Matching Algorithms in Archeological Applications

2011 ◽  
Vol 6 ◽  
pp. 275-282 ◽  
Author(s):  
C. Re ◽  
S. Robson ◽  
R. Roncella ◽  
M Hess
Keyword(s):  
Laser Scanner ◽  
Medium Size ◽  
Accuracy Evaluation ◽  
Software Packages ◽  
Dense Matching ◽  
Laser Scanners ◽  
Surface Models ◽  
University College London ◽  
Archaeological Artifacts ◽  
Archaeological Objects

In the cultural heritage field the recording and documentation of small and medium size objects with very detailed Digital Surface Models (DSM) is readily possible by through the use of high resolution and high precision triangulation laser scanners. 3D surface recording of archaeological objects can be easily achieved in museums; however, this type of record can be quite expensive. In many cases photogrammetry can provide a viable alternative for the generation of DSMs. The photogrammetric procedure has some benefits with respect to laser survey. The research described in this paper sets out to verify the reconstruction accuracy of DSMs of some archaeological artifacts obtained by photogrammetric survey. The experimentation has been carried out on some objects preserved in the Petrie Museum of Egyptian Archaeology at University College London (UCL). DSMs produced by two photogrammetric software packages are compared with the digital 3D model obtained by a state of the art triangulation color laser scanner. Intercomparison between the generated DSM has allowed an evaluation of metric accuracy of the photogrammetric approach applied to archaeological documentation and of precision performances of the two software packages.

scholarly journals Basic Diagnosis and Prediction of Persistent Contrail Occurrence Using High-Resolution Numerical Weather Analyses/Forecasts and Logistic Regression. Part II: Evaluation of Sample Models

2009 ◽  
Vol 48 (9) ◽  
pp. 1790-1802 ◽  
Author(s):  
David P. Duda ◽  
Patrick Minnis
Keyword(s):  
Relative Humidity ◽  
Wind Direction ◽  
Meteorological Data ◽  
Logistic Models ◽  
Satellite Observations ◽  
Lapse Rate ◽  
Prediction System ◽  
Advanced Regional Prediction System ◽  
Regional Prediction ◽  
Surface Models

Abstract A probabilistic forecast to accurately predict contrail formation over the conterminous United States (CONUS) is created by using meteorological data based on hourly meteorological analyses from the Advanced Regional Prediction System (ARPS) and the Rapid Update Cycle (RUC) combined with surface and satellite observations of contrails. Two groups of logistic models were created. The first group of models (SURFACE models) is based on surface-based contrail observations supplemented with satellite observations of contrail occurrence. The most common predictors selected for the SURFACE models tend to be related to temperature, relative humidity, and wind direction when the models are generated using RUC or ARPS analyses. The second group of models (OUTBREAK models) is derived from a selected subgroup of satellite-based observations of widespread persistent contrails. The most common predictors for the OUTBREAK models tend to be wind direction, atmospheric lapse rate, temperature, relative humidity, and the product of temperature and humidity.

scholarly journals The CarboEurope Regional Experiment Strategy

2006 ◽  
Vol 87 (10) ◽  
pp. 1367-1380 ◽  
Author(s):  
A. J. Dolman ◽  
J. Noilhan ◽  
P. Durand ◽  
C. Sarrat ◽  
A. Brut ◽  
...  
Keyword(s):  
Land Surface ◽  
Major Product ◽  
State Variables ◽  
Land Surface Models ◽  
Quality Metric ◽  
Key Characteristics ◽  
Surface Models ◽  
Global Soil ◽  
Standard Deviations ◽  
Model Agreement

The Second Global Soil Wetness Project (GSWP-2) is an initiative to compare and evaluate 10-year simulations by a broad range of land surface models under controlled conditions. A major product of GSWP-2 is the first global gridded multimodel analysis of land surface state variables and fluxes for use by meteorologists, hydrologists, engineers, biogeochemists, agronomists, botanists, ecologists, geographers, climatologists, and educators. Simulations by 13 land models from five nations have gone into production of the analysis. The models are driven by forcing data derived from a combination of gridded atmospheric reanalyses and observations. The resulting analysis consists of multimodel means and standard deviations on the monthly time scale, including profiles of soil moisture and temperature at six levels, as well as daily and climatological (mean annual cycle) fields for over 50 land surface variables. The monthly standard deviations provide a measure of model agreement that may be used as a quality metric. An overview of key characteristics of the analysis is presented here, along with information on obtaining the data.

scholarly journals Permafrost temperature and active-layer thickness of Yakutia with 0.5-degree spatial resolution for model evaluation

2013 ◽  
Vol 5 (2) ◽  
pp. 305-310 ◽  
Author(s):  
C. Beer ◽  
A. N. Fedorov ◽  
Y. Torgovkin
Keyword(s):  
Layer Thickness ◽  
Spatial Resolution ◽  
Active Layer ◽  
Land Surface ◽  
Grid Cell ◽  
Active Layer Thickness ◽  
East Siberia ◽  
Permafrost Temperature ◽  
Surface Models ◽  
The Mean

Abstract. Based on the map of landscapes and permafrost conditions in Yakutia (Merzlotno-landshaftnaya karta Yakutskoi0 ASSR, Gosgeodeziya SSSR, 1991), rasterized maps of permafrost temperature and active-layer thickness of Yakutia, East Siberia were derived. The mean and standard deviation at 0.5-degree grid cell size are estimated by assigning a probability density function at 0.001-degree spatial resolution. The gridded datasets can be accessed at the PANGAEA repository (doi:10.1594/PANGAEA.808240). Spatial pattern of both variables are dominated by a climatic gradient from north to south, and by mountains and the soil type distribution. Uncertainties are highest in mountains and in the sporadic permafrost zone in the south. The maps are best suited as a benchmark for land surface models which include a permafrost module.

Sign in / Sign up

Export Citation Format

Share Document