Assessment of Potential Applications of Plasma with Liquid Water

2013 ◽  
pp. 379-412
Keyword(s):  
Liquid Water ◽  
Potential Applications

scholarly journals Tunable Temperature Characteristic of Terahertz Bragg Fiber Filled with Liquid Water

2021 ◽  
Vol 11 (18) ◽  
pp. 8306
Author(s):  
Cuijuan Guo ◽  
Mengya Su ◽  
Jia Shi ◽  
Linlin Tian ◽  
Wei Xu ◽  
...  
Keyword(s):  
Liquid Water ◽  
Low Frequency ◽  
Functional Materials ◽  
Temperature Characteristic ◽  
Defect Layer ◽  
Confinement Loss ◽  
Hollow Core ◽  
The Finite Element Method ◽  
Bragg Fiber ◽  
Potential Applications

Hollow-core terahertz (THz) fibers have attracted a lot of research interest due to the low loss and easy inner modification with functional materials. Liquid water has unique properties in the THz region and has been widely investigated in THz emission, sensing, and devices. In this paper, a hollow-core THz Bragg fiber with a water defect layer is proposed. The finite element method is used to verify and analyze the tunable temperature characteristic of the water-filled THz fiber. The numerical analysis results show that the confinement loss and the low-frequency side of the dip near 0.5 THz can be controlled by the temperature of the liquid water. The temperature sensitivity of the THz fiber is obtained at 0.09614 dB·m−1/K at 0.45 THz with a high core power fraction up to 98%. The proposed THz fiber has potential applications in THz interaction with liquid and THz tunable devices.

An in situ and ex situ TEM study of the formation of thin cobalt silicide films by molecular beam epitaxy on the silicon (100) surface

1988 ◽  
Vol 46 ◽  
pp. 884-885
Author(s):  
D. Loretto ◽  
J. M. Gibson ◽  
S. M. Yalisove ◽  
R. T. Tung
Keyword(s):  
Molecular Beam Epitaxy ◽  
Molecular Beam ◽  
Defect Density ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
Ex Situ ◽  
Metal Base ◽  
In Situ Experiments ◽  
Potential Applications

The cobalt disilicide/silicon system has potential applications as a metal-base and as a permeable-base transistor. Although thin, low defect density, films of CoSi2 on Si(111) have been successfully grown, there are reasons to believe that Si(100)/CoSi2 may be better suited to the transmission of electrons at the silicon/silicide interface than Si(111)/CoSi2. A TEM study of the formation of CoSi2 on Si(100) is therefore being conducted. We have previously reported TEM observations on Si(111)/CoSi2 grown both in situ, in an ultra high vacuum (UHV) TEM and ex situ, in a conventional Molecular Beam Epitaxy system.The procedures used for the MBE growth have been described elsewhere. In situ experiments were performed in a JEOL 200CX electron microscope, extensively modified to give a vacuum of better than 10-9 T in the specimen region and the capacity to do in situ sample heating and deposition. Cobalt was deposited onto clean Si(100) samples by thermal evaporation from cobalt-coated Ta filaments.

Microstructure of laser-irradiated, conducting Kapton polyimide

1995 ◽  
Vol 53 ◽  
pp. 502-503
Author(s):  
D. L. Callahan ◽  
Z. Ball ◽  
H. M. Phillips ◽  
R. Sauerbrey
Keyword(s):  
Electron Microscopy ◽  
Phase Transition ◽  
Transmission Electron Microscopy ◽  
Cross Section ◽  
Film Surface ◽  
Cross Sectional ◽  
General Utility ◽  
Transmission Electron ◽  
Considerable Debate ◽  
Potential Applications

Ultraviolet laser-irradiation can be used to induce an insulator-to-conductor phase transition on the surface of Kapton polyimide. Such structures have potential applications as resistors or conductors for VLSI applications as well as general utility electrodes. Although the percolative nature of the phase transformation has been well-established, there has been little definitive work on the mechanism or extent of transformation. In particular, there has been considerable debate about whether or not the transition is primarily photothermal in nature, as we propose, or photochemical. In this study, cross-sectional optical microscopy and transmission electron microscopy are utilized to characterize the nature of microstructural changes associated with the laser-induced pyrolysis of polyimide.Laser-modified polyimide samples initially 12 μm thick were prepared in cross-section by standard ultramicrotomy. Resulting contraction in parallel to the film surface has led to distortions in apparent magnification. The scale bars shown are calibrated for the direction normal to the film surface only.

Fabrication and characterization - by High Resolution Electron Microscopy and atom probe microanalysis - of Co-based metallic multilayer films

1990 ◽  
Vol 48 (4) ◽  
pp. 772-773
Author(s):  
Amanda K. Petford-Long ◽  
A. Cerezo ◽  
M.G. Hetherington
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
High Resolution Electron Microscopy ◽  
Atom Probe ◽  
Multilayer Films ◽  
Interface Roughness ◽  
Probe Field ◽  
Resolution Electron ◽  
Potential Applications ◽  
Field Ion Microscope

The fabrication of multilayer films (MLF) with layer thicknesses down to one monolayer has led to the development of materials with unique properties not found in bulk materials. The properties of interest depend critically on the structure and composition of the films, with the interfacial regions between the layers being of particular importance. There are a number of magnetic MLF systems based on Co, several of which have potential applications as perpendicular magnetic (e.g Co/Cr) or magneto-optic (e.g. Co/Pt) recording media. Of particular concern are the effects of parameters such as crystallographic texture and interface roughness, which are determined by the fabrication conditions, on magnetic properties and structure.In this study we have fabricated Co-based MLF by UHV thermal evaporation in the prechamber of an atom probe field-ion microscope (AP). The multilayers were deposited simultaneously onto cobalt field-ion specimens (for AP and position-sensitive atom probe (POSAP) microanalysis without exposure to atmosphere) and onto the flat (001) surface of oxidised silicon wafers (for subsequent study in cross-section using high-resolution electron microscopy (HREM) in a JEOL 4000EX. Deposi-tion was from W filaments loaded with material in the form of wire (Co, Fe, Ni, Pt and Au) or flakes (Cr). The base pressure in the chamber was around 8×10−8 torr during deposition with a typical deposition rate of 0.05 - 0.2nm/s.

Progress and perspectives on halide lithium conductors for all-solid-state lithium batteries

2020 ◽  
Vol 13 (5) ◽  
pp. 1429-1461 ◽  
Author(s):  
Xiaona Li ◽  
Jianwen Liang ◽  
Xiaofei Yang ◽  
Keegan R. Adair ◽  
Changhong Wang ◽  
...  
Keyword(s):  
Energy Storage ◽  
Solid State ◽  
Lithium Batteries ◽  
Electrochemical Stability ◽  
Superionic Conductors ◽  
Fundamental Understanding ◽  
Potential Applications ◽  
Synthesis Routes

This review focuses on fundamental understanding, various synthesis routes, chemical/electrochemical stability of halide-based lithium superionic conductors, and their potential applications in energy storage as well as related challenges.

Porphyrin-functionalized coordination star polymers and their potential applications in photodynamic therapy

2019 ◽  
Vol 10 (45) ◽  
pp. 6116-6121 ◽  
Author(s):  
Tan Ji ◽  
Lei Xia ◽  
Wei Zheng ◽  
Guang-Qiang Yin ◽  
Tao Yue ◽  
...  
Keyword(s):  
Photodynamic Therapy ◽  
Self Assembly ◽  
Star Polymers ◽  
New Family ◽  
Potential Applications

We present a new family of porphyrin-functionalized coordination star polymers prepared through combination of coordination-driven self-assembly and post-assembly polymerization. Their self-assembly behaviour in water and potential for photodynamic therapy were demonstrated.

A peek in the micro-sized world: a review of design principles, engineering tools, and applications of engineered microbial community

2020 ◽  
Vol 48 (2) ◽  
pp. 399-409
Author(s):  
Baizhen Gao ◽  
Rushant Sabnis ◽  
Tommaso Costantini ◽  
Robert Jinkerson ◽  
Qing Sun
Keyword(s):  
Microbial Community ◽  
Microbial Communities ◽  
Environmental Remediation ◽  
Real Life ◽  
Design Principles ◽  
Microbial Interactions ◽  
Potential Applications ◽  
New Gene ◽  
Global Biogeochemical Cycles ◽  
Synthetic Microbial Communities

Microbial communities drive diverse processes that impact nearly everything on this planet, from global biogeochemical cycles to human health. Harnessing the power of these microorganisms could provide solutions to many of the challenges that face society. However, naturally occurring microbial communities are not optimized for anthropogenic use. An emerging area of research is focusing on engineering synthetic microbial communities to carry out predefined functions. Microbial community engineers are applying design principles like top-down and bottom-up approaches to create synthetic microbial communities having a myriad of real-life applications in health care, disease prevention, and environmental remediation. Multiple genetic engineering tools and delivery approaches can be used to ‘knock-in' new gene functions into microbial communities. A systematic study of the microbial interactions, community assembling principles, and engineering tools are necessary for us to understand the microbial community and to better utilize them. Continued analysis and effort are required to further the current and potential applications of synthetic microbial communities.

Dynamic Assessment Language Tasks and the Prediction of Performance on Year-End Language Skills in Preschool Dual Language Learners

2020 ◽  
Vol 29 (3) ◽  
pp. 1226-1240
Author(s):  
Janet L. Patterson ◽  
Barbara L. Rodríguez ◽  
Philip S. Dale
Keyword(s):  
Head Start ◽  
Language Learners ◽  
Language Impairment ◽  
Dual Language ◽  
Dynamic Assessment ◽  
Dual Language Learners ◽  
Achievement Testing ◽  
Potential Applications ◽  
Language Screening ◽  
Relationship Of

Purpose Early identification is a key element for accessing appropriate services for preschool children with language impairment. However, there is a high risk of misidentifying typically developing dual language learners as having language impairment if inappropriate tools designed for monolingual children are used. In this study of children with bilingual exposure, we explored performance on brief dynamic assessment (DA) language tasks using graduated prompting because this approach has potential applications for screening. We asked if children's performance on DA language tasks earlier in the year was related to their performance on a year-end language achievement measure. Method Twenty 4-year-old children from Spanish-speaking homes attending Head Start preschools in the southwestern United States completed three DA graduated prompting language tasks 3–6 months prior to the Head Start preschools' year-end achievement testing. The DA tasks, Novel Adjective Learning, Similarities in Function, and Prediction, were administered in Spanish, but correct responses in English or Spanish were accepted. The year-end achievement measure, the Learning Accomplishment Profile–Third Edition (LAP3), was administered by the children's Head Start teachers, who also credited correct responses in either language. Results Children's performance on two of the three DA language tasks was significantly and positively related to year-end LAP3 language scores, and there was a moderate and significant relationship for one of the DA tasks, even when controlling for age and initial LAP3 scores. Conclusions Although the relationship of performance on DA with year-end performance varies across tasks, the findings indicate potential for using a graduated prompting approach to language screening with young dual language learners. Further research is needed to select the best tasks for administration in a graduated prompting framework and determine accuracy of identification of language impairment.

Sign in / Sign up

Export Citation Format

Share Document